The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Current and emerging trends in polymeric 3D printed microfluidic devices
Open accessAbstract
3D printing technology has been considered a valid alternative for producing microfluidic devices during the last two decades. 3D printing introduces new strategies to obtain high precision microfluidic parts without complex tools and machines that can make the production of microfluidic devices cheaper, faster, and easier than conventional microfluidic fabrications methods such as soft-lithography. Among the main 3D techniques used for this purpose, fused filament manufacturing (FFF), inkjet 3D printing (i3Dp) and vat polymerization (VP) are of the greatest interest since they are well-established techniques in the field and are cost-affordable both in equipment and material. However, for polymeric 3D printing to establish itself as a real production technique for microfluidics chips, there are still some barriers in terms of technology and materials to overtake. For example, the level of resolution and precision of 3D printed microfluidic parts still does not reach the level of conventional techniques (only in some specific cases and through strategies that are not very easy to implement), and, from a materialistic point of view, few materials present the desired characteristics (e.g., biocompatibility, optical transparency, and mechanical properties) for specific sectors such as medicine, analytical chemistry, and pharmaceuticals. This review intends to evaluate and analyze the current state of 3D printing techniques and their materials for the manufacture of microfluidic chips. The article will show and discuss the latest innovations, materials, and applications of such 3D printed microstructures. This review's main focus is to provide an overview of recent and future developments in 3D printing and materials in the branch of microfluidics fabrications. By selecting the right materials and the design freedom afforded by 3D printing, unique structures with interesting properties might be produced.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039 · cited 1×
“The removal of the support material after printing implies complex post-printing treatments [22,29,49].”
BackgroundA global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms
Macdonald, N. P., Cabot, J. M., Smejkal, P., Guijt, R. M., Paull, B., & Breadmore, M. C. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b00136 · Cited by 425 · cited 1×
“, stereolithography and digital light processing, since they are wellestablished techniques that present a good compromise between printing resolution/accuracy, printing speed and material availability [45,65,66].”
BackgroundCosta, P. F., Albers, H. J., Linssen, J. E. A., Middelkamp, H. H. T., van der Hout, L., Passier, R., van den Berg, A., Malda, J., & van der Meer, A. D. (2017) · Lab on a Chip · doi:10.1039/c7lc00202e · Cited by 226
Cited by
Recent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K. (2024) · Advanced Materials · doi:10.1002/adma.202403641 · Cited by 339
Metadata
- Authors
- Gonzalez, G., Roppolo, I., Pirri, C. F., & Chiappone, A.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2022-07
- Volume
- 55
- Pages
- 102867
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W4228998860
- Cited by
- 160
- References
- 8
- FWCI
- 9.72
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Current and emerging trends in polymeric 3D printed microfluidic devices. https://app.cochat.ai/papers/10.1016/j.addma.2022.102867
- The paper
- Gonzalez, G., Roppolo, I., Pirri, C. F., & Chiappone, A. (2022). Current and emerging trends in polymeric 3D printed microfluidic devices. Additive Manufacturing. https://doi.org/10.1016/j.addma.2022.102867
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.