Cited by 625biodegradable polymer synthesis and propertiesPolymer crystallization and propertiesPolymer composites and self-healing

The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.

An overview on synthesis, properties and applications of poly(butylene-adipate-co-terephthalate)–PBAT

Open access

Jian, Jiao, Xiangbin, Zeng, Xianbo, Huang·2020·Advanced Industrial and Engineering Polymer Research

DOI 10.1016/j.aiepr.2020.01.001

Open this paper in CoChat — free account Open PDF

Abstract

A significantly growing interest is to design new biodegradable polymers in order to solve fossil resources and environmental pollution problems associated with conventional plastics. A kind of new biodegradable polymers, aliphatic–aromatic co-polyesters have been researched widely and developed rapidly in recent years, since that can combine excellent biodegradability provided from aliphatic polyesters and good properties from aromatic polyesters. Out of which, poly (butylene-adipate- co -terephthalate) (PBAT) shows the most importance. PBAT has been commercialized by polycondensation reaction of butanediol (BDO), adipic acid (AA) and terephthalic acid (PTA) using general polyester manufacturing technology. And it has been considered to have desirable properties and competitive costs to be applied in many fields. Therefore, this review aims to present an overview on the synthesis, properties and applications of PBAT.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.1016/j.aiepr.2020.01.001

Cites

57 of 57 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Starch—composition, fine structure and architecture
Tester, R. F., Karkalas, J., & Qi, X. (2004) · Journal of Cereal Science · doi:10.1016/j.jcs.2003.12.001 · Cited by 1,769
Biodegradable polymers
Chandra, R. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00039-7 · Cited by 1,514
Chemical syntheses of biodegradable polymers
Okada, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00039-9 · Cited by 1,239
Nano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033
Study of Biodegradable Polylactide/Poly(butylene adipate- co -terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2005) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 956
‘White revolution’ to ‘white pollution’—agricultural plastic film mulch in China
Liu, E. K., He, W., & Yan, C. (2014) · Environmental Research Letters · doi:10.1088/1748-9326/9/9/091001 · Cited by 862
Biobased polyesters and other polymers from 2,5-furandicarboxylic acid: a tribute to furan excellency
Sousa, A. F., Vilela, C., Fonseca, A. C., Matos, M., Freire, C. S. R., Gruter, G. M., Coelho, J. F. J., & Silvestre, A. J. D. (2015) · Polymer Chemistry · doi:10.1039/c5py00686d · Cited by 719
Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing
Signori, F., Coltelli, M.-B., & Bronco, S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.004 · Cited by 503
Biodegradation of polyesters containing aromatic constituents
Müller, R.-J., Kleeberg, I., & Deckwer, W.-D. (2001) · Journal of Biotechnology · doi:10.1016/s0168-1656(00)00407-7 · Cited by 497
An overview on properties and applications of poly(butylene adipate‐ co ‐terephthalate)–PBAT based composites
Ferreira, F. V., Cividanes, L. S., Gouveia, R. F., & Lona, L. M. F. (2019) · Polymer Engineering & Science · doi:10.1002/pen.24770 · Cited by 443

Show all 57 references

Research works printed but not linked: 1

Wang, 2016, Effects of plastic film residue on evapotranspiration and soil evaporation in cotton field of Xinjiang, Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 32, 120

Sorted by citations

Items 501–600 of 625

Physicomechanical and Elastic Properties of Polylactide–5,10,15,20-Tetrakis(4-n-hexyloxyphenyl)porphyrin Composite Materials
Tertyshnaya, Y. V., Morokov, E. S., Zhdanova, K. A., & Zakharov, M. S. (2024) · Polymer Science Series D · doi:10.1134/s1995421224701259 · Cited by 1
Research on the impact of active calcium carbonate on the performance of degradable composite films
Li, J., Sun, J., Zhang, L., Gao, C., Luo, S., Chen, X., Wu, X., & Nie, W. (2024) · Journal of Polymer Engineering · doi:10.1515/polyeng-2024-0169 · Cited by 1
Synthesis of Lignocellulose-Based Poly(Butylene 3-Propyladipate-Co-Furanoate): Replacing Adipate
Hu, R., Li, W., Zhou, X., Yi, S., Zheng, X., Mo, Q., & Liu, W. (2025) · Molecules · doi:10.3390/molecules30040878 · Cited by 1
Comparative evaluation of biodegradable microplastic presence in edible and non-edible tissues of cage-cultured and wild fishes of Periyar River
Mukhopadhyay, P., & Valsalan, S. A. (2025) · Environmental Pollution · doi:10.1016/j.envpol.2025.126073 · Cited by 2
PBAT Resin Synthetic Raw Materials
Li, J. (2025) · Springer eBooks · doi:10.1007/978-981-96-2057-9_2 · Cited by 1
Comparative Study of the Addition of TiO2 and TiO2/OMMT Clay on the Properties of PBAT for Biodegradable Food Packaging Applications
da Silva, A. D. A. P. T., do Ó, R. F., Costa, L. C., dos Santos, F. A., & Iulianelli, G. C. V. (2025) · Materials Research · doi:10.1590/1980-5373-mr-2024-0506 · Cited by 1
Biocompatibility of the Polymer Poly(Butylene Adipate‐ Co ‐Terephthalate) in the Cornea of Rabbits
Pereira, A. K. F., Rodrigues, G. G., Wagatsuma, J. T., Luvizotto, M. C. R., Lucas, A. A., de Oliveira, P. H. C., Faria, F. D., Cintra, L. T. Â., & de Andrade, A. L. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57814 · Cited by 1
Synergistic enhancement of PBAT biodegradation by Purpureocillium lilacinum BA1S: Insights from transcriptomics and functional analyses
Tseng, W.-S., Lee, M.-J., Chen, T.-Y., Lin, S., Chang, S.-L., Lin, P.-Y., Lu, T., & Liu, C. (2025) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2025.139699 · Cited by 1
Tailoring Architecture and Properties of Biodegradable Aliphatic-Aromatic Copolyesters via Interfacial Polymerization
Branovsky, S. E., Behrman, I. L., Hirschboeck, B. R., Assumpção, D. D. C., Grosvenor, E. C., Tullman‐Ercek, D., Shull, K. R., & Chazot, C. A. C. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c13712 · Cited by 1
Structural, Mechanical, and Environmental Assessment of a Poly(butylene adipate- co -terephthalate) (PBAT)-Inulin Composite Material
Brenda, F., Barbi, S., Montorsi, M., Nottiani, D. G., Grimaldi, M., Pitirollo, O., Sciancalepore, C., Milanese, D., & Cespi, D. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c13077 · Cited by 1
Production, blending, and applications of sustainable biopolymers from microalgae and cyanobacteria
Thajuddin, F., Palanivel, P., Elumalai, A., Rasheed, A. S., Thajuddin, S. F., Nooruddin, T., & Dharumadurai, D. (2026) · Food Bioscience · doi:10.1016/j.fbio.2026.108890 · Cited by 1
Molecular dynamics simulation of gas diffusion in poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends
Shanu, K., & Kumar, A. S. P. (2026) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2026.132535 · Cited by 1
Aromatic Nitrogen Heterocycles Enable High‐Performance and Closed‐Loop Recyclable Multifunctional Biomass‐Derived Sustainable Poly(Butylene Succinate) Polyester Materials
Li, Y., Li, X., Fu, T., Li, Z., Zhou, Z., Shen, R., Xu, Y., Wang, X., & Wang, Y. (2026) · Advanced Functional Materials · doi:10.1002/adfm.76875 · Cited by 1
Chemical Recycling as a Tool for Enabling a Second Life for Polyesters
Urruth, N. S., Romera, C. D. O., Otoni, C. G., Oechsler, B. F., de Araújo, P. H. H., & Sayer, C. (2026) · SusMat · doi:10.1002/sus2.70084 · Cited by 1
“Similar to PET, PBAT requires several steps to achieve successive increases in molar mass, generally involving preprocessing, intermediate synthesis in an inert environment, and vacuum polycondensation with by-product removal [ 85 ].”
Electrospun nanofibers a novel treatment for localized applications
Borkar, S. P., & Raizaday, A. (2022) · International Journal of Health Sciences · doi:10.53730/ijhs.v6ns3.9061 · Cited by 1
The 2nd International Online Conference on Polymer Science—Polymers and Nanotechnology for Industry 4.0
Cicala, G., Diez-Pascual, A. M., & Yusa, S. (2022) · MDPI eBooks · doi:10.3390/books978-3-0365-5288-0 · Cited by 1
Comparative Study Of Poly (Butylene Adipate Co-Terephthalate) Nanocomposites With Zinc And Molybdenum Oxides
da Rocha, L. V. M., da Silva, P. S. R. C., & Tavares, M. I. B. (2023) · Seven Editora eBooks · doi:10.56238/methofocusinterv1-115 · Cited by 1
Estudo da incorporação do grafeno na matriz de PBAT para produção de filmes nanocompósitos biodegradáveis para embalagens alimentícias
Ferreira, C. S. G., Souza, P. D. S. E., Lacerda, D. D. S., da Silva, E. O., Tavares, M. I. B., & Iulianelli, G. C. V. (2024) · OBSERVATÓRIO DE LA ECONOMÍA LATINOAMERICANA · doi:10.55905/oelv22n1-180 · Cited by 1
Aerobic and anaerobic degradation of bioplastics
Kaur, M., Menon, V., Kumar, A., Prasad, B., Singh, B., Sharma, S., & Gupta, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95199-9.00003-2 · Cited by 1
Effect of Palm Stearin as a Compatibilizers in PBAT/Zein Blends Biodegradable Polymer
Mirza, A. (2024) · Journal of Electrical Systems · doi:10.52783/jes.2464 · Cited by 1
“PBAT can be manufactured via the polycondensation reaction of butanediol (BDO), adipic acid (AA), and terephthalic acid (PTA) (Jian et al., 2020).”
Background
Processing and Rheological Correlations in Sustainable Polymers
Gholami, F., & Behzadfar, E. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00049-1 · Cited by 1
Durability and Biodegradation of Biopolymers
Botlhoko, O. J., Nomadolo, N. E., Lekalakala, R., & Muniyasamy, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00051-x · Cited by 1
Interfacial compatibilization of fully biodegradable polylactic acid/polybutylene adipate terephthalate blends for improved mechanical and physical performance
Bian, X., Xia, G., Xin, J. H., & Jiang, S. (2024) · Polymers from Renewable Resources · doi:10.1177/20412479241283842 · Cited by 1
“18 However, the poor compatibility of polymer blends causes phase separation between the PLA and PBAT phases, which does not improve the mechanical properties.”
Evaluation of the compostability and toxic effects on Hordeum vulgare and Cynodon dactylon plants of plastic bags manufactured with compostable plastics
Medina, E. S. H., & Rojas-Valencia, M. N. (2025) · PLoS ONE · doi:10.1371/journal.pone.0318938 · Cited by 1
“According to De Matos Costa [20], Weng [21], and Jian [22] the PBAT polymer that they reported showed peaks at 2960 and 2873 cm −1 , an outstanding peak corresponding to the carbonyl group present in the molecule was also detected in the region 1700 and 1740 cm −1 .”
Enhanced interfacial behaviors of benzo(a)pyrene on the petroleum-based degradable plastics endured long-term bio-aging
Liu, X., Feng, Y., Lu, J. J., Wu, J., & Boman, B. J. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.107632 · Cited by 1
A biodegradable polylactic acid–polybutylene adipate terephthalate – starch polymer blend for geotextile applications
Cordin, M., Gleißner, C., Fahrngruber, B., Kozich, M., Bechtold, T., & Pham, T. (2025) · Polymer International · doi:10.1002/pi.70040 · Cited by 1
Design of Mechanical Properties of Poly(butylene-adipate-terephthalate) Reinforced with Zein-TiO2 Complex
Togliatti, E., Grimaldi, M., Pitirollo, O., Cavazza, A., Pugliese, D., Milanese, D., & Sciancalepore, C. (2022) · Material Design & Processing Communications · doi:10.1155/2022/6496985 · Cited by 1
“PBAT is a random copolyester obtained from fossil resources but characterized by complete biodegradability [2], beside high flexibility and toughness, and mechanical properties comparable to the low-density polyethylene (LDPE) [3].”
Background
Desarrollo y optimización de nuevas formulaciones de biopolímeros con principios activos para aplicaciones en el sector envase-embalaje
Lema, S. P. R. (2022) · doi:10.4995/thesis/10251/191458 · Cited by 1
Enhancement of Thermal and Mechanical Properties: Nanofibrillated Cellulose - Reinforced PHB/PBAT 3D Filaments for Fused Deposition ModelingPreprint
Jeffri, N. I., Rawi, N. F. M., Kassim, M. H. M., Peng, L. C., Abdullah, C. K., Kosugi, A., & Arai, T. (2023) · Research Square · doi:10.21203/rs.3.rs-3566630/v1 · Cited by 1
Synthesis of Polymer Blends to Toughen Biobased Polyesters through Reactive Extrusion of Soybean Derived Elastomers
Kuehl, B. (2022) · doi:10.31274/td-20240329-715 · Cited by 1
Effect of mineral filler CaCO3 on the mechanical properties of PBAT/TPS Blend commercially available.Preprint
Qazi, M. O., Gill, Y. Q., & Farooq, M. (2024) · Research Square · doi:10.21203/rs.3.rs-4905875/v1 · Cited by 1
Research Trend of Biomass-Derived Engineering Plastics
Jeon, H., Koo, J. M., Park, S., Kim, S., Jegal, J., Cha, H. G., Oh, D. X., Hwang, S. Y., & Park, J. (2020) · Applied Chemistry for Engineering · doi:10.14478/ace.2020.1016
On the Development and Characterization of Rheological and Mechanical Properties of Polylactide Blends with Polybutylene Adipate Terephthalate
Nesaule, A. Ē., Didrihsone, E., Merijs‐Meri, R., Grīgs, O., & Zicāns, J. (2020) · Key engineering materials · doi:10.4028/www.scientific.net/kem.850.118
“There are several PBAT manufacturers that produce a few grades of PBAT, including BASF, KINGFA, NOVAMONT, TUNHE, XINFU, JINHUI in decreasing order of the production amounts [4].”
Background
BLENDS
Kathuria, A., Detyothin, S., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch14
Tipping points in polymer life cycle greenhouse gas emissionsPreprint
Walker, S., Ryan, A. J., & Rothman, R. H. (2022) · Research Square · doi:10.21203/rs.3.rs-1715591/v1
Aditivación de materiales biodegradables mediante el uso de derivados de colofonia
Pavón, C. (2022) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/191385
Characterisation of the Australian Great Artesian Basin's Caldaquabacillus species and potential role in thermophilic plastic biodegradation
James-Pearson, L. F. (2023) · Queensland University of Technology · doi:10.5204/thesis.eprints.238521
Influência da composição de polímeros plásticos na comunidade microbiana da plastisfera no ecossistema marinho
Ferreira, L. S. D. S. (2022) · doi:10.11606/d.42.2022.tde-07032023-173410
Effect of Crystallization Temperature on the Mechanical and Physical Properties of Solution Cast Polybutylene adipate co-terephthalate/Thermoplastic Starch Films
Mohanty, L., & Mohanty, S. P. (2023) · Materials science forum · doi:10.4028/p-n800mh
“PBAT is an aliphatic-aromatic polyester which can be synthesized from adipic acid, 1,4butanediol and poly terephthalic acid from a polycondensation polymerization reaction [3].”
Background
The Effect of Palm Stearin in Poly (Butylene Adipate-Co-Terephthalate) (PBAT)/ Poly (Lactic Acid) (PLA) Biodegradable Feedstock
Ramlee, N. A., Daud, A. R. M., Ismail, M. H., Ariff, S. F. M., & Subuki, I. (2023) · Journal of Advanced Research in Applied Sciences and Engineering Technology · doi:10.37934/araset.33.1.208218
Optimización de las propiedades de tenacidad e impacto de formulaciones de ácido poliláctico (PLA), mediante mezclas con polímeros flexibles y optimización de los sistemas de compatibilización
Oliveros, R. T. (2023) · doi:10.4995/thesis/10251/201561
Desenvolvimento de nanocompósitos de matriz biodegradável de PBAT incorporados com TiO2 nanoparticulado e avaliação de suas propriedades para aplicação em embalagens de alimentos
Ferreira, C. S. G., Souza, P. D. S. E., Rodrigues, J. G. P., da Silva, E. O., Tavares, M. I. B., & Iulianelli, G. C. V. (2024) · OBSERVATÓRIO DE LA ECONOMÍA LATINOAMERICANA · doi:10.55905/oelv22n1-165
Polymers and fillers used in the packaging industry
Jacob, J., Linson, N., Binoj, J. S., Mansingh, B. B., Kuriakose, S., & Thomas, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99525-2.00026-8 · Cited by 1
Author comment: Microplastics alter soil carbon cycling: Effects on carbon storage, CO 2 and CH 4 emission and microbial community — R0/PR1
Zhu, F. (2023) · Cambridge Prisms Plastics · doi:10.1017/plc.2024.5.pr1
Recommendation: Microplastics alter soil carbon cycling: Effects on carbon storage, CO 2 and CH 4 emission and microbial community — R0/PR2
(2023) · Cambridge Prisms Plastics · doi:10.1017/plc.2024.5.pr2
Recommendation: Microplastics alter soil carbon cycling: Effects on carbon storage, CO 2 and CH 4 emission and microbial community — R1/PR5
(2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2024.5.pr5
Author comment: Microplastics alter soil carbon cycling: Effects on carbon storage, CO 2 and CH 4 emission and microbial community — R1/PR4
Zhu, F. (2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2024.5.pr4
Decision: Microplastics alter soil carbon cycling: Effects on carbon storage, CO 2 and CH 4 emission and microbial community — R1/PR6
(2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2024.5.pr6
Decision: Microplastics alter soil carbon cycling: Effects on carbon storage, CO 2 and CH 4 emission and microbial community — R0/PR3
(2024) · Cambridge Prisms Plastics · doi:10.1017/plc.2024.5.pr3
Desarrollo y caracterización de polímeros de alto rendimiento medioambiental derivados de residuos agroindustriales y aditivos de origen renovable
Gómez-Caturla, J. (2024) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/203217
Pervaporation recovery of aniline using the degradable material poly(butylene adipate‐terephthalate) : Experiment and molecular simulation
Wang, H., Xu, Q., An, X., Guo, C. L., Zhang, Z. X., Hao, X., & Du, X. L. (2024) · Polymer Engineering and Science · doi:10.1002/pen.26803
Influence of magnesium and calcium sulfate whisker on crystallization characteristics of poly (butylene adipate-co-terephthalate) and Poly(butylene succinate)
Mao, H., Liu, S.-H., Chu, J.-C., Shiu, J., Chen, P.-Y., & Chen, C. (2024) · Journal of Reinforced Plastics and Composites · doi:10.1177/07316844241255166
Melt Processing of Polyhydroxyalkanoates (PHAs)
Genovesi, A., & Barletta, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15738-7.00035-0
Synthesis, Mechanical and Photodegradation Properties of Poly(1,4-Butylene Itaconic-Co-Terephthalate) and Their Composites with Functionalized Layered Double HydroxidesPreprint
Lai, H.-C., Chang, W.-H., & Wu, T. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4855705
Biodegradation of Pbat-Silane Functionalized Nanocellulose Composite Films Under Industrial Composting ConditionPreprint
Dhali, K., Daver, F., Cass, P., Sangwan, P., & Adhikari, B. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4862852
Exploring the Role of Phytochemical Additives in Enhancing the Properties of Gelatin-Chitosan Films: A Review
Aswathy, K. S., Kannaiyan, S. K., Ninan, G., & Remya (2024) · Fishery Technology · doi:10.56093/ft.v61i3.136416
“It can be effectively processed independently or blended through various conventional manufacturing techniques, including extrusion, injection molding, and blown film extrusion, due to its good thermal stability and mechanical properties (Jian, Xiangbin, & Xianbo, 2020).”
Recent Advances in Cellulosic Porous Materials
Aghvami‐Panah, M., & Ameli, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00078-8
Desarrollo de nuevos materiales poliméricos y compuestos ecoeficientes basados en principios activos provenientes de la nuez de Brasil
Perez‐Nakai, A. (2024) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/207356
Multifunctional 3D Printed Thermoplastic Biopolyesters
Wahbi, M., France, K. J. D., & Kontopoulou, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00075-2
The Impact of Water on Polylactide – Polybutylene Adipinate Terephthalate Blends
Selezneva, L. D., Podzorova, M. V., Tertyshnaya, Y. V., Romanov, R. R., & Попов, А. А. (2024) · Химическая физика · doi:10.31857/s0207401x24030116
NMR study of blends of thermoplastic starch and poly(butylene-adipate-co-terephthalate) compatibilized with liquid isoprene rubber
Saparová, S., Fričová, O., Šmídová, N., Peidayesh, H., Chodák, I., & Kovaľaková, M. (2024) · AIP conference proceedings · doi:10.1063/5.0234355
An introduction to composite materials in packaging applications
Santos, C. M. D. S., Santos, T. F., Hussein, E. K., Rangappa, S. M., Siengchin, S., Indran, S., & do Nascimento, J. H. O. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13989-5.00018-8
Biodegradable PBS, PBSA, and PBAT Based Systems
Motloung, M. P., Botlhoko, O. J., & Ray, S. S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00084-3
Hydrophobic PBAT/SiO2 Composite Films for Food PackagingPreprint
Gao, J. F., Zhang, J., Guo, H., Liang, Z., Xiao, K., Liu, F., Li, W., Yan, H. Y., & Guo, R. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5151374
Evaluation and Certification of PBAT Biodegradability
Li, J. (2025) · Springer eBooks · doi:10.1007/978-981-96-2057-9_8
Development and Characterization of Wheat Flour Byproduct and Poly(butylene adipate-co-terephthalate) Biodegradable Films Enriched with Rosemary Extract via Blown Extrusion
Peron‐Schlosser, B., de Carvalho, F. A., Paludo, L. C., de Oliveira, R. M., Gallo‐García, L. A., Simões, B. M., da Silva, S. C., Cordova, B. A. B., Carvalho, B. D. M., Yamashita, F., et al. (2025) · Coatings · doi:10.3390/coatings15070743
Enhanced compatibilization of waste commingled plastics for high-quality cultivation substrate fabrication through biodegradable ingredients modulation
Han, S.-L., Zhang, C.-C., Liu, Z., Zhang, F.-S., & Wang, X. R. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.117974
A Bio‐Based Branching Agent for Preparation of Crosslinked Poly(Butylene Succinate‐Co‐Terephthalate): Synthesis, Thermo‐Mechanical and Rheological Properties
Sun, W., Xu, H., Li, Y., Wei, Z., Cao, J., Liang, D., Duan, H., & Lin, Y. (2025) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202500209
Effect of processing methods on the morphology and mechanical properties of biodegradable polymersPreprint
Chan, C. M., Read, T., Garvey, C. J., Lant, P. A., Pratt, S., & Laycock, B. G. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5434616
Optimization of intermolecular interactions in poly(trimethylene 2,4-furanoate) copolymers: an ecodesign case study towards high-performance, biobased, biodegradable and elastic food packagingPreprint
Bianchi, E., Soccio, M., Siracusa, V., Thiyagarajan, S., & Lotti, N. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5648367
Modified Ground Tire Rubber as a Filler to Develop Low PBAT /Starch Composites: Processing Interaction and Physicochemical Performance
Flores‐Silva, P. C., Reyes‐Bautista, C. A., Gámez, J. F. H., & Sifuentes‐Nieves, I. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.70090
Bionanocomposites in Food Packaging
Priyadarshi, R., Khan, A., Riahi, Z., & Rhim, J. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-34158-8.00047-5
Thermomechanical characterization of advanced materials
Baniassadi, M., Baghani, M., Rémond, Y., & Silberschmidt, V. V. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-40330-9.00008-5
Future of Bioplastics and Comparison with Conventional Plastics
Mohanty, S., Prasad, G., & Parida, M. (2025) · Springer eBooks · doi:10.1007/978-3-031-89398-8_10
Development of sustainable heat-shrinkable films from poly(butylene adipate-co-terephthalate) and poly(propylene carbonate)
You, M., Park, G., Jang, H., Cho, Y., & Park, S.-I. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-06066-x
“Biodegradable polymers have gained considerable attention as potential replacements owing to their reduced environmental footprints [ 7 , 8 ].”
Effect of PBAT-g-MA as a compatibilizer towards PBAT/palm frond/palm stearin blend composite via compression molding
Ramlee, N. A., Tominaga, Y., Noordin, M. F. I. M., Shariff, R. M., & Subuki, I. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04710-8
The Controversy Surrounding the Toxicity of Biodegradable Plastics: PBAT as a Case Study
Martı́nez, A., & Salvador-García, D. (2026) · Journal of the Mexican Chemical Society · doi:10.29356/jmcs.v70i1.2411
Development of Activated Carbon-Modified Polymer Composites for Application in Hydroponic Systems
Nascimento, R. D. S., Fortes, A. G. D. S., de Abreu, I. R., Marques, F. D. P., Vieira, I. N. D. S., Barbosa, R., & Alves, T. S. (2026) · Materials Research · doi:10.1590/1980-5373-mr-2025-0441
Graphene amine nanoparticles-reinforced poly(lactic acid)-poly(butylene adipate terephthalate) blend membranes: Structural and electrochemical characterization for supercapacitor applications
Patil, S., Chikkatti, B. S., Momin, M. M., Sajjan, A. M., Banapurmath, N. R., Huddar, S. A., Natarajan, V., Khan, T. M. Y., & Kamble, R. R. (2026) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2026.113645
Reinforced PBAT/PLA Foams With Lignin as a Bio‐Based Nucleating Agent for High‐Performance Building Insulation
Zhang, J., Song, Y., Chen, K., Li, H., Tan, H., Zheng, D., & Zhang, Y. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70629
The Performance, Feasibility, and Sustainability-Based Framework for Biomaterial Recommendation System for Packaging
Kapoor, M., Beemaraj, S. B., Salvi, A., & Biswas, D. (2026) · Integrating materials and manufacturing innovation · doi:10.1007/s40192-026-00447-4
Biodegradable polymers. Part 3. Polymers obtained from synthetic monomers
Boiko, V. V., Riabov, S. V., Kobrina, L. V., Tymoshyk, A., & Dmitrieva, T. V. (2026) · Polymer journal · doi:10.15407/polymerj.48.01.003
Computational Insights into the Thermal Stability and Degradation Pathways of Poly(butylene adipate-co-terephthalate)
Gümüştaş, S., Şener, K., & Kınal, A. (2026) · Celal Bayar Üniversitesi Fen Bilimleri Dergisi · doi:10.18466/cbayarfbe.1673557
Green polymerizations in microflow devices
Adhami, W. (2020) · theses.fr (ABES) · doi:10.70675/8b5fb889ze022z4555z9349z9607a25fbd8e
Enzyme-catalyzed synthesis of polyesters by step-growth polymerization : a promising approach towards a greener synthetic pathway
Nasr, K. (2021) · theses.fr (ABES) · doi:10.70675/b1ef1a77z5ed6z4214zbd5bz81d8c68df07f
Stereoselective ring-opening polymerization of functional β-lactones : access to original polyhydroxyalkanoates
Li, H. (2022) · theses.fr (ABES) · doi:10.70675/bf79d090z8f92z4fe1zadc3zaf893144eda8
Effets des microplastiques biodégradables et non biodégradables sur le microbiote d'Eurytemora affinis
Thery, J. (2023) · theses.fr (ABES) · doi:10.70675/a63b20b6zce51z4df1z89baz6bd27b795a19
Physicochemical and Osteoinductive Comparison of 2D Spin-Coated Films and 3D Porous Solvent-Cast Scaffolds of Poly(3-Hydroxybutyrate- co -3-Hydroxyvalerate) (PHBV)/ Polybutylene Adipate Terephthalate (PBAT) Blends
Agarwal, S., Agarwal, N., Harini, P., Shukla, P., Gupta, S., Lu, M., & Sarkar, J. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6c00041
Structure–property relationships in PLA–PBAT and PLA–PPeAT blends: toward stronger biobased biodegradable packaging materials
Aboukeila, H., Mazaheri, M., Singh, O., Edwards, E., Huber, G. W., Klier, J., & Grady, B. P. (2026) · Journal of Materials Science · doi:10.1007/s10853-026-12836-3
Bioplastics from wastewater: a systematic review on polyhydroxyalkanoate production in bioreactors within a circular bioeconomy framework
Calero, R., Muyulema-Allaica, J. C., & Salavarría, E. (2026) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-026-07150-6
Novel high-performance lithium-ion battery separator made of chain-extended-poly(Butylene Adipate-co-terephthalate)/modified-polypropylene using gravure printing
Rasouli, S., Arshadi, M. J., Ataeefard, M., Ghamarpoor, R., & Salehi, M. M. (2026) · Journal of Materials Science Polymers · doi:10.1007/s44493-026-00016-3
“Among various petrochemical and bio-based biodegradable polymers, PBAT (poly(butylene adipate-co -terephtha- late)) has currently attracted the attention of medical and industrial experts (Jian et al. 2020).”
Block-Like PEG–PBAT Compatibilizers Prepared via Simple Reactive Blending for Enhanced Compatibility of PBAT/TPS Blends
Jung, C. B., Kim, S. K., Lee, J., Son, D., Kang, D., Jang, H., Han, J., & Shim, J. K. (2026) · Journal of Polymers and the Environment · doi:10.1007/s10924-026-03860-0
Archaea-driven bioremediation of polyolefins and polyesters in extreme environments
Chigwada, A. D., & Tekere, M. (2026) · BioDesign Research · doi:10.1016/j.bidere.2026.100092
“This promiscuous feruloyl esterase belongs Jian et al. [22]; Ardabili et al. [23] to the α / β -hydrolase fold superfamily.”
Direct Extrusion–Injection Molding of Sustainable Biocomposites Using Lignocellulosic Fibers/PBAT/PLA
Kumar, R., Singh, Y., Singh, I., & Sharma, A. K. (2026) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-026-14194-2
Multimodal Soft Surgical Robots Enabled by Eco‐Degradable, Sterilizable Polymers and Transient Electronics
Chae, M., Kim, K., Hwang, G., Shim, J., Kim, S.-W., Kim, Y.-W., Han, J., Bae, J.-Y., Lee, J., Chae, M., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202532070
“PBAT (poly(butylene adipate-co-terephthalate)) is a semicrystalline copolyester derived from adipicacid,1,4-butanediol,andterephthalicacid[52],functioning as a strain limiter.”
Process-Compatible Immobilization of Thermolabile Enzymes for Self-Degradable Polyesters via Industrial Melt Compounding above 170 °CPreprint
Seo, J., Kim, H., Kim, H., Im, J., Oh, H. J., Kim, J., Nam, I.-W., Lee, B., & Choi, Y. O. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6916633
Biobased and Biodegradable Furandicarboxylate Polyesters: Linking Molecular Structure to Enzymatic Hydrolyzability
Vangeel, T., Matt, Y., Becker, L., Siegenthaler, K. O., & Sander, M. (2026) · Environmental Science & Technology · doi:10.1021/acs.est.6c01921
Catalytic Recycling and Upcycling of Bio-Based Waste Plastic
Shi, Y., Meng, C., Li, J., Zhang, S., & Ji, N. (2026) · ACS Catalysis · doi:10.1021/acscatal.6c03079
Scale up coating process of PBAT with modified lignin for paper packaging: Barrier properties, and screening volatile/semi-volatile compounds
Silva, F. A. G. S., Pereira, J., Granadeiro, C. M., Duarte, T., & Poças, M. D. F. T. (2026) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2026.101799
Toward Compostable Packaging: Biodegradable Polymer Blends with Biobased Components for Household Chemical Bottle-Layer Applications
Kowalczyk, S., Szewczyk‐Łagodzińska, M., Dębowski, M., Iuliano, A., Truskolaska, M., Krywult-Pawlik, M., Jędrzejczak, G., Grochowska, N., & Plichta, A. (2026) · ACS Omega · doi:10.1021/acsomega.5c10689

Authors: Jian, J., Xiangbin, Z., & Xianbo, H.
Affiliations: Kingfa (China) (CN)
Corresponding author: Xianbo, Huang
Venue: Advanced Industrial and Engineering Polymer Research
Publisher: Elsevier BV
Published: 2020-01
Volume: 3
Issue: 1
Pages: 19-26
ISSN: 2542-5048 (ISSN-L)
DOI: 10.1016/j.aiepr.2020.01.001
OpenAlex: W2999297187
Cited by: 625
References: 57
Citations by year: 2026: 63 · 2025: 134 · 2024: 163 · 2023: 114 · 2022: 86 · 2021: 50 · 2020: 15
FWCI: 17.23
Type: journal article
Language: en
Open access: diamond
doi.org
Licence: cc-by-nc-nd
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
www.elsevier.com/legal/tdmrep-license (tdm)
creativecommons.org/licenses/by-nc-nd/4.0/ (vor, 9 d)
Locations: Advanced Industrial and Engineering Polymer Research (publishedVersion, cc-by-nc-nd)
DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics: Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
Keywords: poly(butylene adipate-co-terephthalate), biodegradable polymers, aliphatic-aromatic copolyesters, polyester synthesis, polycondensation, butanediol, adipic acid, terephthalic acid, polymer properties, polymer applications

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

An overview on synthesis, properties and applications of poly(butylene-adipate-co-terephthalate)–PBAT

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks