The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Production of 5-hydroxymethylfurfural from glucose using aluminium doped MCM-41 silica as acid catalyst
Open accessAbstract
Abstract Mesoporous aluminium doped MCM-41 silica catalysts were prepared by a sol–gel method in two reaction steps (acid and alkaline hydrolysis) from joint hydrolysis of tetraethylortosilicate (TEOS) and aluminium triisoproxide, using n-dodecylammonium chloride as surfactant, at room temperature, and subsequent calcination at 550 °C. Two solids with different Si/Al molar ratios (5 and 10) were synthesized, which possess high specific surface area and acidity, with both Bronsted and Lewis acid sites. By using a biphasic water/MIBK as reaction medium and a 30 wt.% of the 10Al-MCM catalyst with respect to the substrate weight (glucose), 87% of glucose conversion and 36% of HMF yield were achieved at 195 °C after 150 min of reaction time. The reaction is quite selective toward HMF, since only fructose was detected as by-product, but neither levulinic acid nor furfural were found. Moreover, the use of a sodium chloride aqueous solution (20 wt.%) and MIBK ameliorates the partition coefficient between the organic and the aqueous phases up to 1.9, leading to an enhancement of the glucose conversion and HMF yield, attaining values of 98% and 63%, respectively, in a time as short as 30 min. The catalytic performance of this acid solid, associated to the presence of strong acid sites, is well maintained after three catalytic cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical Routes for the Transformation of Biomass into Chemicals
Corma, A., Iborra, S., & Velty, A. (2007) · Chemical Reviews · doi:10.1021/cr050989d · Cited by 5,970
Cited by
Catalytic Conversion of Carbohydrates to Initial Platform Chemicals: Chemistry and Sustainability
Mika, L. T., Cséfalvay, E., & Németh, Á. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00395 · Cited by 1,320
Hu, L., Lin, L., Wu, Z., Zhou, S., & Liu, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.042 · Cited by 445
Biorefinery roadmap based on catalytic production and upgrading 5-hydroxymethylfurfural
Hou, Q., Qi, X., Zhen, M., Qian, H., Nie, Y., Bai, C., Zhang, S., Bai, X., & Ju, M. (2021) · Green Chemistry · doi:10.1039/d0gc02770g · Cited by 430
Efficient valorization of biomass to biofuels with bifunctional solid catalytic materials
Li, H., Fang, Z., Smith, R. L., & Yang, S. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.04.004 · Cited by 284
Chemocatalytic hydrolysis of cellulose into glucose over solid acid catalysts
Hu, L., Lin, L., Wu, Z., Zhou, S., & Liu, S. (2015) · Applied Catalysis B: Environment and Energy · doi:10.1016/j.apcatb.2015.03.003 · Cited by 281
Metadata
- Authors
- Jiménez-Morales, I., Moreno-Recio, M., Santamaría-González, J., Maireles-Torres, P., & Jiménez-López, A.
- Venue
- Applied Catalysis B: Environmental
- Publisher
- Elsevier BV
- Published
- 2015-03
- Volume
- 164
- Pages
- 70-76
- ISSN
- 0926-3373 (ISSN-L)
- OpenAlex
- W2028716964
- Cited by
- 163
- References
- 1
- FWCI
- 6.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.