The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Kinetics of CO2 methanation on a Ru-based catalyst at process conditions relevant for Power-to-Gas applications
Open accessAbstract
In this paper we show that a 0.5 wt.% Ru/γ-Al2O3 catalyst is appropriate to carry out the Sabatier reaction (CO2 methanation) under process conditions relevant for the Power-to-Gas application and we provide a kinetic model able to describe the CO2 conversion over a wide range of process conditions, previously unexplored. To achieve these goals, the effects of feed gas composition (H2/CO2 ratio and presence of diluents), space velocity, temperature and pressure on catalyst activity and selectivity are investigated. The catalyst is found stable when operating over a wide range of CO2 conversion values, with CH4 selectivity always over 99% and no deactivation, even when working with carbon-rich gas streams. The effect of water on the catalyst performance is also investigated and an inhibiting kinetic effect is pointed out. Eventually, the capacity of kinetic models taken from the literature to account for CO2 conversion under the explored experimental conditions is assessed. It is found that the kinetic model proposed by Lunde and Kester in 1973 (J. Catal. 30 (1973) 423) is able to describe satisfactorily the catalyst behavior in a wide range of CO2 conversion spanning from differential conditions to thermodynamic equilibrium, provided that a new set of kinetic parameters is used. It is shown however that a better fitting can be achieved by using a modified kinetic model, accounting for the inhibiting effect of H2O on CO2 conversion rate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent advances in catalytic hydrogenation of carbon dioxide
Wang, W., Wang, S., Ma, X., & Gong, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15008a · Cited by 3,316
CO2 hydrogenation to hydrocarbons over Co and Fe-based Fischer-Tropsch catalysts
Visconti, C. G., Martinelli, M., Falbo, L., Fratalocchi, L., & Lietti, L. (2016) · Catalysis Today · doi:10.1016/j.cattod.2016.04.010 · Cited by 150
Self-citation
Cited by
Recent trend in thermal catalytic low temperature CO2 methanation: A critical review
Lee, W. J., Li, C., Prajitno, H., Yoo, J., Patel, J., Yang, Y., & Lim, S. (2021) · Catalysis Today · doi:10.1016/j.cattod.2020.02.017 · Cited by 490
A review of recent catalyst advances in CO2 methanation processes
Ashok, J., Pati, S., Hongmanorom, P., Tianxi, Z., Junmei, C., & Kawi, S. (2020) · Catalysis Today · doi:10.1016/j.cattod.2020.07.023 · Cited by 472
Metadata
- Authors
- Falbo, L., Martinelli, M., Visconti, C. G., Lietti, L., Bassano, C., & Deiana, P.
- Venue
- Applied Catalysis B: Environmental
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 225
- Pages
- 354-363
- ISSN
- 0926-3373 (ISSN-L)
- OpenAlex
- W2775406497
- Cited by
- 216
- References
- 2
- FWCI
- 4.23
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.