The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Co-precipitation, impregnation and so-gel preparation of Ni catalysts for pyrolysis-catalytic steam reforming of waste plastics
Open accessAbstract
Three Ni/Al2O3 catalysts prepared by co-precipitation, impregnation and sol-gel methods were investigated for the pyrolysis-steam reforming of waste plastics. The influence of Ni loading method on the physicochemical properties and the catalytic activity towards hydrogen and carbon monoxide production were studied. Three different plastic feedstocks were used, high density polyethylene (HDPE), polypropylene (PP) and polystyrene (PS), and compared in relation to syngas production. Results showed that the overall performance of the Ni catalyst prepared by different synthesis method was found to be correlated with the porosity, metal dispersion and the type of coke deposits on the catalyst. The porosity of the catalyst and Ni dispersion were significantly improved using the sol-gel method, producing a catalyst surface area of 305.21 m2/g and average Ni particle size of 15.40 nm, leading to the highest activity among the three catalysts investigated. The least effective catalytic performance was found with the co-precipitation prepared catalyst which was due to the uniform Ni dispersion and the amorphous coke deposits on the catalyst. In regarding to the type of plastic, polypropylene experienced more decomposition reactions at the conditions investigated, resulting in higher hydrogen and coke yield. However, the catalytic steam reforming ability was more evident with polystyrene, producing more hydrogen from the feedstock and converting more carbon into carbon monoxide gases. Overall the maximum syngas production was achieved from polystyrene in the presence of the sol-gel prepared Ni/Al2O3 catalyst, with production of 62.26 mmol H2 g−1plastic and 36.10 mmol CO g−1plastic.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Recent advances in the gasification of waste plastics. A critical overview
Lopez, G., Artetxe, M., Amutio, M., Alvarez, J., Bilbao, J., & Olazar, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.032 · Cited by 852
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Shen, Y., Zhao, P., Shao, Q., Ma, D., Takahashi, F., & Yoshikawa, K. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.01.032 · Cited by 426
Sánchez‐Sánchez, M., Navarro, R. M., & Fierro, J. L. G. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.10.025 · Cited by 423
Li, G., Hu, L., & Hill, J. M. (2006) · Applied Catalysis A: General · doi:10.1016/j.apcata.2005.11.013 · Cited by 384
Yao, D., Zhang, Y., Williams, P. T., Yang, H., & Chen, H. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.09.035 · Cited by 347
Self-citationAcomb, J. C., Wu, C., & Williams, P. T. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.06.054 · Cited by 331
Self-citationYao, D., Wu, C., Yang, H., Zhang, Y., Nahil, M. A., Chen, Y., Williams, P. T., & Chen, H. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.012 · Cited by 315
Self-citationHydrogen production by steam gasification of polypropylene with various nickel catalysts
Wu, C., & Williams, P. T. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.09.003 · Cited by 313
Self-citationWu, C., & Williams, P. T. (2010) · Fuel · doi:10.1016/j.fuel.2010.05.032 · Cited by 271
Self-citationEffect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics
Xue, Y., Johnston, P., & Bai, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.071 · Cited by 262
Yao, D., Yang, H., Chen, H., & Williams, P. T. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.01.050 · Cited by 250
Self-citationGoula, M. A., Charisiou, N. D., Papageridis, K. N., Delimitis, A., Pachatouridou, E., & Iliopoulou, E. F. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.05.129 · Cited by 230
Barbarias, I., Lopez, G., Artetxe, M., Arregi, A., Bilbao, J., & Olazar, M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.048 · Cited by 215
Acomb, J. C., Wu, C., & Williams, P. T. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.09.018 · Cited by 196
Self-citationChen, F., Wu, C., Dong, L., Vassallo, A., Williams, P. T., & Huang, J. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.10.028 · Cited by 171
Self-citationProduction of Hydrogen from Plastics by Pyrolysis and Catalytic Steam Reform
Czernik, S., & French, R. J. (2006) · Energy & Fuels · doi:10.1021/ef050354h · Cited by 171
Barbarias, I., Lopez, G., Alvarez, J., Artetxe, M., Arregi, A., Bilbao, J., & Olazar, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.091 · Cited by 170
Pyrolysis–gasification of post-consumer municipal solid plastic waste for hydrogen production
Wu, C., & Williams, P. T. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.045 · Cited by 164
Self-citationHassani Rad, S. J., Haghighi, M., Alizadeh Eslami, A., Rahmani, F., & Rahemi, N. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.02.002 · Cited by 164
Enhancement in hydrogen molecule adsorption on B12N12 nano-cluster by decoration of nickel
Rad, A. S., & Ayub, K. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.08.158 · Cited by 129
Liu, X., Zhang, Y. S., Nahil, M. A., Williams, P. T., & Wu, C. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.05.001 · Cited by 121
Self-citationWu, C., & Williams, P. T. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2009.03.004 · Cited by 116
Self-citationHDPE pyrolysis-steam reforming in a tandem spouted bed-fixed bed reactor for H2 production
Erkiaga, A., López, G., Barbarias, I., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.10.010 · Cited by 115
Olivine as a tar removal catalyst during fluidized bed gasification of plastic waste
Mastellone, M. L., & Arena, U. (2008) · AIChE Journal · doi:10.1002/aic.11497 · Cited by 108
Dong, L., Wu, C., Ling, H., Shi, J. X., Williams, P. T., & Huang, J. (2016) · Fuel · doi:10.1016/j.fuel.2016.10.072 · Cited by 104
Self-citationHydrogen Production by High Density Polyethylene Steam Gasification and In-Line Volatile Reforming
López, G., Erkiaga, A., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02413 · Cited by 100
Bang, Y., Park, S., Han, S. J., Yoo, J., Song, J. H., Choi, J. H., Kang, K. H., & Song, I. K. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.06.023 · Cited by 96
Catalytic steam reforming of the aqueous fraction of bio-oil using Ni-Ce/Mg-Al catalysts
Bimbela, F., Ábrego, J., Puerta, R. A., Garcia, L., & Arauzo, J. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.03.009 · Cited by 96
yeongsu, P., Namioka, T., Sakamoto, S., Min, T., Roh, S. A., & Yoshikawa, K. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.014 · Cited by 95
Methane steam reforming at low temperature: Effect of light alkanes’ presence on coke formation
Angeli, S., Pilitsis, F. G., & Lemonidou, A. A. (2014) · Catalysis Today · doi:10.1016/j.cattod.2014.05.043 · Cited by 78
Wu, C., & Williams, P. T. (2009) · Energy & Fuels · doi:10.1021/ef900278w · Cited by 68
Self-citationPreparation of nickel-loaded on lignite char for catalytic gasification of biomass
Wang, B.-S., Cao, J., Zhao, X.-Y., Bian, Y., Song, C., Zhao, Y., Fan, X., Wei, X., & Takarada, T. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.07.024 · Cited by 68
Wu, C., & Williams, P. T. (2008) · Energy & Fuels · doi:10.1021/ef800574w · Cited by 65
Self-citationSteam reforming of plastic pyrolysis model hydrocarbons and catalyst deactivation
Barbarias, I., López, G., Amutio, M., Artetxe, M., Álvarez, J., Arregi, A., Bilbao, J., & Olazar, M. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.09.003 · Cited by 60
Cited by
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
Ochoa, A., Bilbao, J., Gayubo, A. G., & Castaño, P. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109600 · Cited by 547
Low-temperature catalytic upgrading of waste polyolefinic plastics into liquid fuels and waxes
Nakaji, Y., Tamura, M., Miyaoka, S., Kumagai, S., Tanji, M., Nakagawa, Y., Yoshioka, T., & Tomishige, K. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119805 · Cited by 328
Recent progress in controlled carbonization of (waste) polymers
Gong, J., Chen, X., & Tang, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.001 · Cited by 309
Huang, J., Veksha, A., Chan, W. P., Giannis, A., & Lisak, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111866 · Cited by 301
Metadata
- Authors
- Yao, D., Yang, H., Chen, H., & Williams, P. T.
- Venue
- Applied Catalysis B: Environmental
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 239
- Pages
- 565-577
- ISSN
- 0926-3373 (ISSN-L)
- OpenAlex
- W2883600292
- Cited by
- 271
- References
- 38
- FWCI
- 4.32
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.