CoChat

Is the CO2 methanation on highly loaded Ni-Al2O3 catalysts really structure-sensitive?

Beierlein, Dennis, Häussermann, Dorothea, Pfeifer, Mirko, Schwarz, Thomas, Stöwe, Klaus, Traa, Yvonne, Klemm, Elias · 2019 · Applied Catalysis B: Environmental
Cited by 159

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

Abstract Highly loaded Ni-Al2O3 catalysts (14–88 wt.-% Ni) were prepared by dry impregnation, wet impregnation, deposition precipitation and coprecipitation and tested in the CO2 methanation. By means of ICP-OES, XRD, TPR, H2 chemisorption, N2 physisorption and thermogravimetry, different Ni species were identified, and their dependence on the synthesis method and the Ni loading was investigated. The catalysts prepared had Ni particle sizes of 5–91 nm and Ni surface areas of 5–51 m2 g−1. It could be shown that the turnover frequency (TOF) does not depend on metal-support interactions, the metal-support interface or the particle size. Hence, the CO2 methanation on Ni-Al2O3 catalysts is clearly a structure- in sensitive reaction. There is a linear correlation between the conversion and the Ni surface area at constant modified residence time. Hence, catalysts with the highest Ni surfaces, i.e., the samples prepared by deposition precipitation and coprecipitation, reached the highest weight time yields. The prerequisites for high Ni surface areas at high Ni loadings could be elucidated: During the synthesis, Ni has to be able to completely penetrate the mesopores of the support. Furthermore, a linear correlation between the selectivity to CO and the weight percentage of the impurity Na could be revealed. The stability of the supported catalysts was highly dependent on the spatial distribution of Ni and the stability of the support: A high dispersion or the presence of unsupported Ni reduced the stability. Furthermore, the stability of the supported catalysts was smaller than the one of the coprecipitated catalysts, where the stability decreased with increasing nNi/nAl.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.apcatb.2018.12.064

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Metadata

Authors
Beierlein, D., Häussermann, D., Pfeifer, M., Schwarz, T., Stöwe, K., Traa, Y., & Klemm, E.
Venue
Applied Catalysis B: Environmental
Publisher
Elsevier BV
Published
2019-06
Volume
247
Pages
200-219
ISSN
0926-3373 (ISSN-L)
OpenAlex
W2906482408
Cited by
159
References
2
FWCI
3.27
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.