The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Engineering PtRu bimetallic nanoparticles with adjustable alloying degree for methanol electrooxidation: Enhanced catalytic performance
Abstract
Abstract PtRu bimetal is of particularly attractive in various electrocatalytic reactions owing to its synergistic effect, ligand effect and strain effect. Here, PtRu nanoalloy supported on porous graphitic carbon (PC) has been successfully prepared via a very facile method involving co-reduction the precursors of Pt and Ru at 300 °C by H2 (PtRu/PC L) followed by thermal treatment at high temperature (700 °C, PtRu/PC–H). Specifically, the electrocatalytic performance of PtRu/PC nanoalloy could be dramatically enhanced through high-temperature annealing. This strategy has synthesized smaller Pt and PtRu nanoparticles (ca. L and Pt/PC nanocatalysts. The mass activity and specific activity on PtRu/PC–H nanoalloy can be increased to 1674.2 mA mg−1Pt and 4.4 mA cm−2 for MOR, it is 4.08 and 8.80 times higher than that of the Pt/PC nanocatalyst, respectively. From in-situ FTIR spectra, we can discover PtRu/PC–H nanoalloy generates CO2 at a lower potential of −150 mV than those on PtRu/PC–L (0 mV) and Pt/PC (50 mV) nanocatalysts, dramatically improves the ability of cleavage C–H bond and alleviates the COads poisoning on active sites. The PtRu/PC H nanocatalyst exhibits maximum power density of 83.7 mW cm−2 in single methanol fuel cell test, which more than threefold than that of commercial Pt/C as the anode catalyst. Those experimental results open an effective and clean avenue in the development and preparation of high-performance Pt-based nanocatalysts for direct methanol fuel cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zhang, Z.-C., Tian, X.-C., Zhang, B.-W., Huang, L., Zhu, F.-C., Qu, X.-M., Liu, L., Liu, S., Jiang, Y.-X., & Sun, S.-G. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.02.023 · Cited by 110
Self-citation
Cited by
Descriptors for the Evaluation of Electrocatalytic Reactions: d‐Band Theory and Beyond
Jiao, S., Fu, X., & Huang, H. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202107651 · Cited by 719
Recent Progress in MXene‐Based Materials: Potential High‐Performance Electrocatalysts
Liu, A., Liang, X., Ren, X., Guan, W., Gao, M., Yang, Y., Yang, Q., Gao, L., Li, Y., & Ma, T. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003437 · Cited by 386
Chen, W., Luo, S., Sun, M., Wu, X., Zhou, Y., Liao, Y., Tang, M., Fan, X., Huang, B., & Quan, Z. (2022) · Advanced Materials · doi:10.1002/adma.202206276 · Cited by 301
Nanoscale Metal Particle Modified Single‐Atom Catalyst: Synthesis, Characterization, and Application
Chen, R., Chen, S., Wang, L., & Wang, D. (2024) · Advanced Materials · doi:10.1002/adma.202304713 · Cited by 254
Yang, J., Hübner, R., Zhang, J., Wan, H., Zheng, Y., Wang, H., Qi, H., He, L., Li, Y., Dubale, A. A., et al. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202015679 · Cited by 166
Self-citation
Metadata
- Authors
- Zhang, J., Qu, X., Han, Y., Shen, L., Yin, S., Li, G., Jiang, Y., & Sun, S.
- Venue
- Applied Catalysis B: Environmental
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 263
- Pages
- 118345
- ISSN
- 0926-3373 (ISSN-L)
- OpenAlex
- W2986289846
- Cited by
- 202
- References
- 1
- FWCI
- 4.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Engineering PtRu bimetallic nanoparticles with adjustable alloying degree for methanol electrooxidation: Enhanced catalytic performance. https://app.cochat.ai/papers/10.1016/j.apcatb.2019.118345
- The paper
- Zhang, J., Qu, X., Han, Y., Shen, L., Yin, S., Li, G., Jiang, Y., & Sun, S. (2020). Engineering PtRu bimetallic nanoparticles with adjustable alloying degree for methanol electrooxidation: Enhanced catalytic performance. Applied Catalysis B: Environmental. https://doi.org/10.1016/j.apcatb.2019.118345
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.