The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review
Open accessAbstract
Industrial activities have a huge potential for waste heat recovery. In spite of its high potential, industrial waste heat (IWH) is currently underutilized. This may be due, on one hand, to the technical and economic difficulties in applying conventional heat recovery methods and, on the other, the temporary or geographical mismatch between the energy released and its heat demand. Thermal energy storage (TES) is a technology which can solve the existing mismatch by recovering the IWH and storing it for a later use. Moreover, the use of recovered IWH leads to a decrease of CO2 emissions and to economic and energy savings. Depending on the distance between the IWH source and the heat demand, TES systems can be placed on-site or the IWH can be transported by means of mobile TES systems, to an off-site heat demand. Around 50 industry case studies, in which both on-site and off-site recovery systems are considered are here reviewed and discussed taking into account the characteristics of the heat source, the heat, the TES system, and the economic, environmental and energy savings. Besides, the trends and the maturity of the cases reviewed have been considered. On-site TES systems in the basic metals manufacturing are the technology and industrial sector which has focused the most attention among the researchers, respectively. Moreover, water (or steam), erythritol and zeolite are the TES materials used in most industries and space comfort and electricity generation are the most recurrent applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
US Environmental Protection Agency
(1998) · Choice Reviews Online · doi:10.5860/choice.35-4455 · Cited by 5,897
On the relationship between energy consumption, CO2 emissions and economic growth in Europe
Acaravci, A., & Ozturk, I. (2010) · Energy · doi:10.1016/j.energy.2010.07.009 · Cited by 949
Brückner, S., Liu, S., Miró, L., Radspieler, M., Cabeza, L. F., & Lävemann, E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.147 · Cited by 597
Self-citationEnergy storage for desalination processes powered by renewable energy and waste heat sources
Gude, V. G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.06.061 · Cited by 373
Vellaichamy, P., Pandian, M. C., Malan, E., Velraj, R., & Seeniraj, R. V. (2010) · Applied Energy · doi:10.1016/j.apenergy.2010.07.023 · Cited by 327
Energy recovery from high temperature slags
Barati, M., Esfahani, S., & Utigard, T. A. (2011) · Energy · doi:10.1016/j.energy.2011.07.007 · Cited by 312
Mapping and discussing Industrial Waste Heat (IWH) potentials for different countries
Miró, L., Brückner, S., & Cabeza, L. F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.06.035 · Cited by 206
Self-citationShon, J., Kim, H., & Lee, K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.049 · Cited by 167
Brueckner, S., Miró, L., Cabeza, L. F., Pehnt, M., & Laevemann, E. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.04.078 · Cited by 163
Self-citationThermal and flow behaviors in heat transportation container using phase change material
Kaizawa, A., Kamano, H., Kawai, A., Jozuka, T., Senda, T., Maruoka, N., & Akiyama, T. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.07.022 · Cited by 152
Cited by
Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910
Phase change material-integrated latent heat storage systems for sustainable energy solutions
Aftab, W., Usman, A., Shi, J., Yuan, K., Qin, M., & Zou, R. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00527h · Cited by 536
Lin, Y., Alva, G., & Fang, G. (2018) · Energy · doi:10.1016/j.energy.2018.09.128 · Cited by 502
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
A review of salt hydrates for seasonal heat storage in domestic applications
Donkers, P. A. J., Sögütoglu, L. C., Huinink, H. P., Fischer, H. R., & Adan, O. C. G. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.080 · Cited by 403
A review of thermal energy storage technologies for seasonal loops
Mahon, H., O'Connor, D., Friedrich, D., & Hughes, B. (2022) · Energy · doi:10.1016/j.energy.2021.122207 · Cited by 344
Li, Z., Lu, Y., Huang, R., Chang, J., Yu, X., Jiang, R., Yu, X., & Roskilly, A. P. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116277 · Cited by 342
Mahdi, J. M., & Nsofor, E. C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.11.082 · Cited by 318
Role of porous metal foam on the heat transfer enhancement for a thermal energy storage tube
Yang, X., Yu, J., Guo, Z., Jin, L., & He, Y.-L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.075 · Cited by 257
Yu, Q., Jiang, Z., Cong, L., Lu, T., Suleiman, B., Leng, G., Wu, Z., Ding, Y., & Li, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.072 · Cited by 79
“High temperature thermal energy storage (HTTES) is expected to be one of the key enabling technologies for both the successful market introduction of large amounts of variable/intermittent electricity generation from renewable energy sources [1] and the energy saving and efficient energy utilization in conventional th…”
Background
Metadata
- Authors
- Miró, L., Gasia, J., & Cabeza, L. F.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2016-10
- Volume
- 179
- Pages
- 284-301
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2464385842
- Cited by
- 640
- References
- 24
- FWCI
- 38.07
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.