Multi-scale multi-dimensional microstructure imaging of oil shale pyrolysis using X-ray micro-tomography, automated ultra-high resolution SEM, MAPS Mineralogy and FIB-SEM
Open accessThe DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
The complexity of unconventional rock systems is expressed both in the compositional variance of the microstructure and the extensive heterogeneity of the pore space. Visualizing and quantifying the microstructure of oil shale before and after pyrolysis permits a more accurate determination of petrophysical properties which are important in modeling hydrocarbon production potential. We characterize the microstructural heterogeneity of oil shale using X-ray micro-tomography (µCT), automated ultra-high resolution scanning electron microscopy (SEM), MAPS Mineralogy (Modular Automated Processing System) and Focused Ion Beam Scanning Electron Microscopy (FIB-SEM). The organic-rich Eocene Green River (Mahogany zone) oil shale is characterized using a multi-scale multi-dimensional workflow both before and after pyrolysis. Observations in 2-D and 3-D and across nm-µm-mm length scales demonstrate both heterogeneity and anisotropy at every scale. Image acquisition and analysis using µCT and SEM reveal a microstructure of alternating kerogen-rich laminations interbedded with layers of fine-grained inorganic minerals. MAPS Mineralogy combined with ultrafast measurements reveal mineralogic textures dominated by dolomite, calcite, K-feldspar, quartz, pyrite and illitic clays along with their spatial distribution, augmenting conventional mineral analysis. From high resolution Backscattered electron (BSE) images, intra-organic, inter-organic-mineral, intra- and inter-mineral pores are observed with varying sizes and geometries. By using FIB milling and SEM imaging sequentially and repetitively, 3-D data sets were reconstructed. By setting 3-D gradient and marker-based watershed transforms, the organic matter, minerals and pore phases (including pore-back artifacts) were segmented and visualized and the pore-size distribution was computed. Following pyrolysis, fractures from the mm-to-µm scales were observed with preferential propagation along the kerogen-rich laminations and coalescence leading to an interconnected fracture network. The application of these techniques to worldwide oil shale deposits will allow significant insights into estimating mechanical and chemical proprieties of oil shale formations for modeling and designing oil shale pyrolysis processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Adsorption Surface Area and Porosity
Gregg, S. J., Sing, K. S. W., & Salzberg, H. W. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426447 · Cited by 9,507
A Non-Local Algorithm for Image Denoising
Buades, A., Coll, B., & Morel, J.-M. (2005) · 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05) · doi:10.1109/cvpr.2005.38 · Cited by 7,616 · cited 2×
“In this study, the data sets were pre-processed using a Fast Fourier transform (FFT) and a non-local means edge preserving smoothing filter [116,117].”
MethodThe Dynamics of Capillary Flow
Washburn, E. W. (1921) · Physical Review · doi:10.1103/physrev.17.273 · Cited by 7,141
Kerogen origin, evolution and structure
Vandenbroucke, M., & Largeau, C. (2007) · Organic Geochemistry · doi:10.1016/j.orggeochem.2007.01.001 · Cited by 1,294
Wildenschild, D., & Sheppard, A. P. (2013) · Advances in Water Resources · doi:10.1016/j.advwatres.2012.07.018 · Cited by 1,239
Organic matter-hosted pore system, Marcellus Formation (Devonian), Pennsylvania
Milliken, K. L., Rudnicki, M., Awwiller, D. N., & Zhang, T. (2013) · AAPG Bulletin · doi:10.1306/07231212048 · Cited by 1,150
Nonlocal Image and Movie Denoising
Buades, A., Coll, B., & Morel, J.-M. (2008) · International Journal of Computer Vision · doi:10.1007/s11263-007-0052-1 · Cited by 769
De Leeuw, J. W., & Largeau, C. (1993) · Topics in Geobiology · doi:10.1007/978-1-4615-2890-6_2 · Cited by 500
Bultreys, T., De Boever, W., & Cnudde, V. (2016) · Earth-Science Reviews · doi:10.1016/j.earscirev.2016.02.001 · Cited by 474
New perspectives in mercury porosimetry
León y León, C. A. (1998) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(98)00052-9 · Cited by 464
Geology and resources of some world oil-shale deposits
Dyni, J. R. (2006) · Scientific Investigations Report · doi:10.3133/sir29955294 · Cited by 464
Unconventional gas – A review of regional and global resource estimates
McGlade, C., Speirs, J., & Sorrell, S. (2013) · Energy · doi:10.1016/j.energy.2013.01.048 · Cited by 383
Handbook of Alternative Fuel Technologies
(2007) · CRC Press eBooks · doi:10.1201/9781420014518 · Cited by 378
Role of Mineral Matrix in Kerogen Pyrolysis: Influence on Petroleum Generation and Migration
Espitalie, M. M. J., MADEC, M., & TISSOT, B. (1980) · AAPG Bulletin · doi:10.1306/2f918928-16ce-11d7-8645000102c1865d · Cited by 372
GEOLOGY AND RESOURCES OF SOME WORLD OIL-SHALE DEPOSITS
Dyni, J. R. (2003) · Oil Shale · doi:10.3176/oil.2003.3.02 · Cited by 343
Microfracturing and microporosity in shales
Ougier-Simonin, A., Renard, F., Boehm, C., & Vidal-Gilbert, S. (2016) · Earth-Science Reviews · doi:10.1016/j.earscirev.2016.09.006 · Cited by 289
Mercury porosimetry: state of the art
Van Brakel, J., Modrý, S., & Svatá, M. (1981) · Powder Technology · doi:10.1016/0032-5910(81)85001-2 · Cited by 281
Dynamic Three-Dimensional Pore-Scale Imaging of Reaction in a Carbonate at Reservoir Conditions
Menke, H. P., Bijeljic, B., Andrew, M. G., & Blunt, M. J. (2015) · Environmental Science & Technology · doi:10.1021/es505789f · Cited by 215
Self-citationLewan, M. D., & Roy, S. (2011) · Organic Geochemistry · doi:10.1016/j.orggeochem.2010.10.004 · Cited by 200
Microstructural imaging and characterization of oil shale before and after pyrolysis
Saif, T., Lin, Q., Bijeljic, B., & Blunt, M. J. (2017) · Fuel · doi:10.1016/j.fuel.2017.02.030 · Cited by 189
Self-citationImaging of oil layers, curvature and contact angle in a mixed‐wet and a water‐wet carbonate rock
Singh, K., Bijeljic, B., & Blunt, M. J. (2016) · Water Resources Research · doi:10.1002/2015wr018072 · Cited by 179
Self-citationInvestigation of oil-shale pyrolysis processing conditions using thermogravimetric analysis
Williams, P. T., & Ahmad, N. (2000) · Applied Energy · doi:10.1016/s0306-2619(99)00038-0 · Cited by 154
Influence of process conditions on the pyrolysis of Pakistani oil shales
Williams, P. T., & Ahmad, N. (1999) · Fuel · doi:10.1016/s0016-2361(98)00190-2 · Cited by 124
LeBoeuf, E. J., & Weber, W. J. J. (2000) · Environmental Science & Technology · doi:10.1021/es991103o · Cited by 109
00/02351 Investigation of oil-shale pyrolysis processing conditions using thermogravimetric analysis
(2000) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(00)96264-7 · Cited by 107
Dynamic imaging of oil shale pyrolysis using synchrotron X‐ray microtomography
Saif, T., Lin, Q., Singh, K., Bijeljic, B., & Blunt, M. J. (2016) · Geophysical Research Letters · doi:10.1002/2016gl069279 · Cited by 99
Self-citationAl‐Khulaifi, Y., Lin, Q., Blunt, M. J., & Bijeljic, B. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.6b06224 · Cited by 98
Self-citationSchiffbauer, J. D., & Xiao, S. (2009) · Palaios · doi:10.2110/palo.2009.p09-003r · Cited by 93
Comparative pyrolysis and combustion kinetics of oil shales
Kök, M. V., & Pamir, M. R. (2000) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00096-0 · Cited by 91
Microfracturing during primary migration in shales
Teixeira, M. G., Donzé, F., Renard, F., Panahi, H., Papachristos, E., & Scholtès, L. (2016) · Tectonophysics · doi:10.1016/j.tecto.2016.11.010 · Cited by 75
Characterization of pore structure: porosimetry and sorption
Conner, W. C., Cevallos-Candau, J. F., Weist, E. L., et al. (1986) · Langmuir · doi:10.1021/la00068a006 · Cited by 62
Washburn, K. E., Birdwell, J. E., Foster, M. S., & Gutierrez, F. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00807 · Cited by 49
Kerogen pyrolysis in the presence and absence of water and minerals: Steranes and triterpenoids
Pan, C., Geng, A., Zhong, N., & Liu, J. (2009) · Fuel · doi:10.1016/j.fuel.2009.06.032 · Cited by 39
FIB/SEM and SEM/EDX: a New Dawn for the SEM in the Core Lab?
Lemmens, H., Butcher, A. R., & Botha, P. (2011) · Cited by 39
Self-citationHan, X., Jiang, X., & Cui, Z. (2008) · Energy & Fuels · doi:10.1021/ef700645x · Cited by 37
Cited by
Modeling of multi-scale transport phenomena in shale gas production — A critical review
Wang, H., Chen, L., Qu, Z., Yin, Y., Kang, Q., Yu, B., & Tao, W.-Q. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114575 · Cited by 293
Metadata
- Authors
- Saif, T., Lin, Q., Butcher, A. R., Bijeljic, B., & Blunt, M. J.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2017-09
- Volume
- 202
- Pages
- 628-647
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2723131247
- Cited by
- 334
- References
- 37
- FWCI
- 17.78
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.