CoChat

Systematic investigation on combustion characteristics and emission-reduction mechanism of potentially toxic elements in biomass- and biochar-coal co-combustion systems

Open access
Yousaf, Balal, Liu, Guijian, Abbas, Qumber, Wang, Ruwei, Ubaid Ali, Muhammad, Ullah, Habib, Liu, Ruijia, Zhou, Chuncai · 2017 · Applied Energy
Cited by 112

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

Abstract Thermochemically converted biochar is considered as one of the promising alternative solid-fuel due to its high carbon contents of up to 80%, and has great potential to produce environmentally-friendly green-energy by improved fuel properties and emission-reduction of potentially toxic elements (PTEs). In this study, the biochar fuels, produced from peanut shell (PS) and wheat straw (WS) at 300, 500 and 700 °C, alone and blended with coal at mass ratio of 20% and 50% were systematically investigated for combustion characteristics and their potential to reduce the emission of PTEs including As, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Ga, Ni, Pb, Sb, Sn, V and Zn in relation to partitioning, retention and volatilization in the co-combustion systems, using a variety of experimental techniques. Results indicated that the biochar-coal blended fuels in equal proportion showed steady state combustion over broad temperature range resulting increased the combustion efficiency and improved the thermal characteristics in comparison to coal and/or biomass-coal fuels. In addition, soot yield, CO emission and un-burned carbon in fly ash reduced significantly in biochar-blended fuels. However, CO2 emission from biochar-coal co-combustion was comparable to coal and/or biomass-coal fuels. Moreover, the present study illustrated that the volatilization potential of PTEs during combustion of biochar and their blends with coal decreased considerably up to 21% compared to that of coal, and enrichment of these contaminants occurred in the bottom and fly ashes ranged from 15.38–65% and 24.54–74.29%, respectively. Slagging and fouling problems were still found with biochar-coal co-combustion due to the higher inorganic fraction of biochar, which were overcome with the hydrothermal washing of fuels. Thus, it can be concluded that biochar-coal co-combustion is a suitable option for its use in existing coal-fired energy generation system to achieve the sustainable clean-green energy and reduction of gaseous PTEs emission.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.apenergy.2017.10.059

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 112

Metadata

Authors
Yousaf, B., Liu, G., Abbas, Q., Wang, R., Ubaid Ali, M., Ullah, H., Liu, R., & Zhou, C.
Venue
Applied Energy
Publisher
Elsevier BV
Published
2017-12
Volume
208
Pages
142-157
ISSN
0306-2619 (ISSN-L)
OpenAlex
W2766962710
Cited by
112
References
3
FWCI
9.49
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.