Integrated absorption-mineralisation for low-energy CO2 capture and sequestration
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
The high energy penalty of absorbent regeneration remains the most critical challenge hindering the large-scale application of amine-based carbon dioxide (CO2) capture. To overcome this challenge, we developed an integrated CO2 absorption-mineralisation (IAM) process in which the amine sorbent can be regenerated by a chemical method rather than the traditional thermal method. We investigated the technical feasibility of IAM and the associated mechanisms by adding calcium oxide or fly ash into CO2-loaded amine solutions, including the five commonly used amines: monoethanolamine, diethanolamine, piperazine (PZ), N-methyldiethanolamine and 2-amino-2-methy-1-propanol. The performance stability of the optimised amine was verified in multicycle experiments. We also investigated the technical feasibility of IAM in practical applications using fly ash as a feedstock for absorbent regeneration. The CO2 absorption and mineralisation experiments were performed in a bubble column and a stirred reactor respectively. Acid titration was used to measure the CO2-loading of solid and liquid sample. FT-IR spectroscopy was used to analyse the species changes in the amine solutions during regeneration. The crystalline phases present in fresh and carbonated fly ash samples were determined by X-ray diffraction analysis. The results indicate that CO2 absorbed by the five amine solutions was sequestered into carbonate precipitates at a moderate temperature (40 °C) and the amine absorbents were regenerated after carbonation reactions. PZ exhibited the largest cyclic loading (0.72 mol/mol) and regeneration efficiency (91%) among the five amines. PZ also achieved stable cyclic loading, regeneration efficiency and kinetic performance over five cycles of IAM experiments. When the industrial waste, fly ash was used, PZ displayed a cyclic loading of 4.2 mol/mol, lower than that of CaO but still 1.1times higher than that of the thermal regeneration-based process. Compared with the traditional thermal regeneration-based CO2 capture, the IAM process has great advantages in energy reduction and capital savings due to a larger cyclic CO2 capacity, a requirement for less energy for amine regeneration and no need for CO2 compression and pipeline transport. This technology has great potential for industrial applications, particularly with CaO-containing wastes, such as fly ash and other alkaline wastes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
A comprehensive review on the applications of coal fly ash
Yao, Z. T., Ji, X. S., Sarker, P. K., Tang, J. H., Ge, L. Q., Xia, M. S., & Xi, Y. Q. (2015) · Earth-Science Reviews · doi:10.1016/j.earscirev.2014.11.016 · Cited by 1,737
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Pan, S.-Y., Chang, E. E., & Chiang, P.-C. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.06.0149 · Cited by 459
CO2 mineral sequestration: developments toward large‐scale application
Zevenhoven, R., Fagerlund, J., & Songok, J. K. (2011) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg3.7 · Cited by 143
Cited by
CO2 mineral carbonation using industrial solid wastes: A review of recent developments
Liu, W., Teng, L., Rohani, S., Qin, Z., Zhao, B., Xu, C. C., Ren, S., Liu, Q., & Liang, B. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129093 · Cited by 508
Effects of fly ash properties on carbonation efficiency in CO2 mineralisation
Ji, L., Yu, H., Zhang, R., French, D., Grigore, M., Yu, B., Wang, X., Yu, J., & Zhao, S. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.01.015 · Cited by 124
Self-citationMultiphase carbon mineralization for the reactive separation of CO2 and directed synthesis of H2
Gadikota, G. (2020) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0158-3 · Cited by 95
Liu, M., & Gadikota, G. (2020) · Fuel · doi:10.1016/j.fuel.2020.117887 · Cited by 87
Liu, M., Hohenshil, A., & Gadikota, G. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c04346 · Cited by 49
Metadata
- Authors
- Ji, L., Yu, H., Li, K., Yu, B., Grigore, M., Yang, Q., Wang, X., Chen, Z., Zeng, M., & Zhao, S.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 225
- Pages
- 356-366
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2803802104
- Cited by
- 153
- References
- 5
- FWCI
- 8.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Integrated absorption-mineralisation for low-energy CO2 capture and sequestration. https://app.cochat.ai/papers/10.1016/j.apenergy.2018.04.108
- The paper
- Ji, L., Yu, H., Li, K., Yu, B., Grigore, M., Yang, Q., Wang, X., Chen, Z., Zeng, M., & Zhao, S. (2018). Integrated absorption-mineralisation for low-energy CO2 capture and sequestration. Applied Energy. https://doi.org/10.1016/j.apenergy.2018.04.108
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.