The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Effect of inclination on the thermal response of composite phase change materials for thermal energy storage
Abstract
Abstract Using paraffin as phase change material, the melting behaviors of pure phase change material and phase change material embedded in open-cell metal foams (composite phase change material) at different inclination angles are studied. Experimental system enabling continuous rotating is designed and built to explore the influence of inclination angles on phase interface evolution and temperature responses inside pure and composite phase change materials. Constant wall temperature is applied on one surface while others are thermally insulated. Experiments are carried out at angles of 0°, 30°, 60°, and 90° respectively. The effects of inclination on the melting behavior of phase change materials are analyzed by visualizing the solid-liquid interface and analyzing the temperature responses. Results demonstrate that the inclination angle has a great influence on the formation and development of natural convection during melting of pure phase change material, affecting the solid-liquid interface propagation and heat transfer rate. Compared with the case at 90°, the full melting time is reduced by 12.28%, 22.81% and 34.21% at 0°, 30° and 60°, respectively. However, when phase change material is melted in open-cell metal foam, heat conduction dominates, and inclination angle has little influence. Melting fractions at different inclination angles are the same and temperature curves at given points overlaps with each other.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Cited by
Zhang, S., Feng, D., Shi, L., Wang, L., Jin, Y., Tian, L., Li, Z., Wang, G., Zhao, L., & Yan, Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110127 · Cited by 568
Arsad, A. Z., Hannan, M. A., Al-Shetwi, A. Q., Mansur, M., Muttaqi, K. M., Dong, Z. Y., & Blaabjerg, F. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.03.208 · Cited by 559
A novel battery thermal management system using nano-enhanced phase change materials
Jilte, R., Afzal, A., & Panchal, S. (2021) · Energy · doi:10.1016/j.energy.2020.119564 · Cited by 422
Abdulateef, A. M., Jaszczur, M., Hassan, Q., Anish, R., Niyas, H., Sopian, K., & Abdulateef, J. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.102227 · Cited by 95
Khatibi, M., Nemati-Farouji, R., Taheri, A., Kazemian, A., Ma, T., & Niazmand, H. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.102055 · Cited by 84
Metadata
- Authors
- Yang, X., Guo, Z., Liu, Y., Jin, L., & He, Y.-L.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 238
- Pages
- 22-33
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2910598927
- Cited by
- 167
- References
- 2
- FWCI
- 14.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.