The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit
Abstract
Abstract The shell and tube latent heat thermal energy storage systems are widely recognized as one of the most effective ways to store and utilize solar energy due to their high energy density, constant storage/releasing temperature, structural feasibility and rational price. The application of fins is an effective method to enhance heat exchange through extend the heat transfer surface area. However, there existed strong uneven melting behavior including melting fraction, temperature uniformity in a vertical thermal energy storage unit. To improve its uniformity of melting fraction and temperature, this study designed various conditions for fin pitch and positions in a non-uniform pattern to reduce the inhomogeneity for the melting process. Numerical models were established and validated by the experimental measurement conducted in this study. The effects of fin pitch and position on the thermal performance of the melting process were quantified via analyzing the melting front evolution, temperature and velocity distribution, melting rate and temperature uniformity. Results demonstrated that a 62.8% and 34.4% reduction in full melting time and average temperature difference in the phase change material region was separately obtained for the thermal energy storage unit with non-uniformly distributed annular fins, compared to the original case with uniform fins. Besides, the melting rate uniformity was also improved by 84.7%. The non-uniform design on fin position and pitch give a perspective to enriching the design methods for practical application in engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Hosseinzadeh, K., Alizadeh, M., & Ganji, D. D. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.11.109 · Cited by 120
RetractedA review of phase change material and performance enhancement method for latent heat storage system
Tao, Y. B., & He, Y.-L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.05.028 · Cited by 633
Self-citationMaximization of performance of a PCM latent heat storage system with innovative fins
Sciacovelli, A., Gagliardi, F., & Verda, V. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.07.015 · Cited by 603
Heyhat, M. M., Mousavi, S., & Siavashi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101235 · Cited by 527
Yang, X., Lu, Z., Bai, Q., Zhang, Q., Jin, L., & Yan, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.007 · Cited by 458
Self-citationExperimental and numerical study of annular PCM storage in the presence of natural convection
Longeon, M., Soupart, A., Fourmigué, J.-F., Bruch, A., & Marty, P. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.06.007 · Cited by 412
Zhang, C., Li, J., & Chen, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114102 · Cited by 398
Mahdi, J. M., Mohammed, H. I., Hashim, E. T., Talebizadehsardari, P., & Nsofor, E. C. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.113993 · Cited by 323
Mahdi, J. M., & Nsofor, E. C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.11.082 · Cited by 318
He, Y.-L., Wang, K., Qiu, Y., Du, B.-C., Liang, Q., & Du, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.006 · Cited by 305
Self-citation
Cited by
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Metadata
- Authors
- Yang, X., Guo, J., Yang, B., Cheng, H., Wei, P., & He, Y.-L.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 279
- Pages
- 115772
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W3083751856
- Cited by
- 309
- References
- 41
- FWCI
- 23.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit. https://app.cochat.ai/papers/10.1016/j.apenergy.2020.115772
- The paper
- Yang, X., Guo, J., Yang, B., Cheng, H., Wei, P., & He, Y.-L. (2020). Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit. Applied Energy. https://doi.org/10.1016/j.apenergy.2020.115772
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.