The DOI matches its Crossref record; 99 of the 99 references it cites were found in a registry or an index.
Additive manufacturing for energy: A review
Open accessAbstract
The conflict between rapidly growing global energy demand and climate change is a grand challenge that requires significant science and technology innovations. Advanced manufacturing could extensively drive down greenhouse gas emission and pollution, and shorten the time-to-market. Additive manufacturing is a process of fabricating three-dimensional objects by depositing materials layer-by-layer directly from computational geometry model, and it eliminates the design and fabrication restrictions of conventional manufacturing methods to a large extent. As an emerging and transformative technology, additive manufacturing technologies have shown the potential benefits of energy saving in multiple energy sectors. To further increase their applications in nuclear energy and renewable energies, fundamental research is needed to overcome some key challenges in terms of process monitoring and control, dimension accuracy, and structural integrity of the components. The validation and qualification of additive manufacturing processes and the products from those additive manufacturing processes are imperative to meeting the high standards of critical components in various energy production, conversion and storage systems. In this review article, we summarize the current status of cutting-edge additive manufacturing technologies and their applications in the fields of nuclear energy, battery, fuel cell, oil & gas. We also outline the major challenges and fundamental research needed to achieve the full potential of additive manufacturing technologies. This review provides critical discussion and prospects to address global energy challenges by applying innovative additive manufacturing technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lattice Boltzmann model for simulating flows with multiple phases and components
Shan, X., & Chen, H. (1993) · Physical Review E · doi:10.1103/physreve.47.1815 · Cited by 3,622
Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.09.030 · Cited by 3,329
Self-citationGibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Electricity generation by direct oxidation of glucose in mediatorless microbial fuel cells
Chaudhuri, S. K., & Lovley, D. R. (2003) · Nature Biotechnology · doi:10.1038/nbt867 · Cited by 1,542
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Materials, technological status, and fundamentals of PEM fuel cells – A review
Wang, Y., Ruiz Diaz, D. F., Chen, K. S., Wang, Z., & Adroher, X. C. (2020) · Materials Today · doi:10.1016/j.mattod.2019.06.005 · Cited by 1,419
Self-citationKing, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Cited by
Borowski, P. (2021) · Energies · doi:10.3390/en14071885 · Cited by 449
Ponticelli, G. S., Tagliaferri, F., Venettacci, S., Horn, M., Giannini, O., & Guarino, S. (2021) · Applied Sciences · doi:10.3390/app11167375 · Cited by 23
Auyeskhan, U., Lee, T., Park, Y., Kim, D., Kim, N., Kim, C.-S., & Kim, D.-H. (2024) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-023-01396-4 · Cited by 8
Guo, J., Wang, Y., Wang, Y., Peng, S., & Wang, F. (2023) · Applied Sciences · doi:10.3390/app131910657 · Cited by 3
Self-citation
Metadata
- Authors
- Sun, C., Wang, Y., McMurtrey, M. D., Jerred, N. D., Liou, F., & Li, J.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 282
- Pages
- 116041
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W3102092243
- Cited by
- 405
- References
- 99
- FWCI
- 18.24
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing for energy: A review. https://app.cochat.ai/papers/10.1016/j.apenergy.2020.116041
- The paper
- Sun, C., Wang, Y., McMurtrey, M. D., Jerred, N. D., Liou, F., & Li, J. (2021). Additive manufacturing for energy: A review. Applied Energy. https://doi.org/10.1016/j.apenergy.2020.116041
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.