Solvent extraction of lithium from simulated shale gas produced water with a bifunctional ionic liquid
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
The recovery of lithium from brines is a major field of study with an increase in lithium-ion batteries consumption and the subsequent growth of lithium consumption. The recovery of lithium from shale gas produced water is promising since these sources could contain non-negligible concentrations of lithium. In this study, lithium extraction was investigated using solvent extraction with a bifunctional ionic liquid (IL) as an extracting agent diluted in n-dodecane. The components of these IL are cheap and commercially available products, namely Aliquat-336 (methyltrioctylammonium chloride) and DEHPA (di-(2-ethylhexyl)phosphoric acid), and its synthesis is straightforward. Lithium extraction was optimized by studying several experimental parameters (mixing time, aqueous phase acidity, IL concentration in the solvent phase, aqueous lithium concentration). The mechanism of extraction was detailed, and the stripping was shown to be complete with 0.5 mol.L−1 of HCl. A two stages strategy was defined to recover lithium from synthetic brine. In the first stage, divalent metals are removed using five successive cycles of extraction with DEHPA (1 mol.L−1) dissolved in n-dodecane. In the second stage, the IL extracting agent [Aliquat-336][DEHPA] (1 mol.L−1) allowed to remove 83% of lithium in one cycle of extraction, which is higher than reported solvent extraction results with conventional extracting molecules.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recovery and recycling of lithium: a review
Swain, B. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.08.031 · Cited by 1,713
Membrane-based technologies for lithium recovery from water lithium resources: A review
Li, X., Mo, Y., Qing, W., Shao, S., Tang, C. Y., & Li, J. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117317 · Cited by 756
Recovery of lithium from Uyuni salar brine
An, J. W., Kang, D. J., Tran, K. T., Kim, M. J., Lim, T., & Tran, T. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.02.008 · Cited by 509
Choubey, P. K., Chung, K.-S., Kim, M.-S., Lee, J.-C., & Srivastava, R. R. (2017) · Minerals Engineering · doi:10.1016/j.mineng.2017.04.008 · Cited by 290
Solvent extraction of lithium ions by tri-n-butyl phosphate using a room temperature ionic liquid
Shi, C., Jing, Y., & Jia, Y. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.01.025 · Cited by 236
Shi, C., Jing, Y., Xiao, J., Wang, X., Yao, Y., & Jia, Y. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.08.034 · Cited by 208
Cited by
Technology for the Recovery of Lithium from Geothermal Brines
Stringfellow, W. T., & Dobson, P. F. (2021) · Energies · doi:10.3390/en14206805 · Cited by 293
“[221] investigated the extraction of lithium from brines using the ionic liquid methyltrioctylammonium chloride (Aliquat-336) and the extractant DEHPA (Figure 18), dissolved in n-dodecane.”
BackgroundMethodResultInfluentialNikkhah, H., Ipekçi, D., Xiang, W., Stoll, Z., Xu, P., Li, B., McCutcheon, J. R., & Beykal, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155349 · Cited by 154
Wang, X., Numedahl, N., & Jiang, C. (2024) · Applied Geochemistry · doi:10.1016/j.apgeochem.2024.106126 · Cited by 22
Metadata
- Authors
- Zante, G., Trébouet, D., & Boltoeva, M.
- Venue
- Applied Geochemistry
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 123
- Pages
- 104783
- ISSN
- 0883-2927 (ISSN-L)
- OpenAlex
- W3090603880
- Cited by
- 38
- References
- 6
- FWCI
- 1.59
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solvent extraction of lithium from simulated shale gas produced water with a bifunctional ionic liquid. https://app.cochat.ai/papers/10.1016/j.apgeochem.2020.104783
- The paper
- Zante, G., Trébouet, D., & Boltoeva, M. (2020). Solvent extraction of lithium from simulated shale gas produced water with a bifunctional ionic liquid. Applied Geochemistry. https://doi.org/10.1016/j.apgeochem.2020.104783
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.