Cited by 103Heat Transfer and OptimizationHeat Transfer MechanismsHeat Transfer and Boiling Studies

The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.

Experimental study on thermal–hydraulic performance of a wavy fin-and-flat tube aluminum heat exchanger

Dong, Junqi, Su, Lin, Chen, Qian, Xu, Weiwu·2013·Applied Thermal Engineering

DOI 10.1016/j.applthermaleng.2012.09.018

Open this paper in CoChat — free account

Integrity signals

Registry

Crossref · 10.1016/j.applthermaleng.2012.09.018

Cites

18 of 18 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Describing the uncertainties in experimental results
Moffat, R. J. (1988) · Experimental Thermal and Fluid Science · doi:10.1016/0894-1777(88)90043-x · Cited by 9,860
Compact Heat Exchangers
Kays, W. M., London, A. L., & Eckert, E. R. G. (1960) · Journal of Applied Mechanics · doi:10.1115/1.3644004 · Cited by 2,846
Compact Heat Exchangers
(2016) · Elsevier eBooks · doi:10.1016/c2014-0-03422-3 · Cited by 818
A generalized heat transfer correlation for Iouver fin geometry
Chang, Y.-J., & Wang, C.-C. (1997) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(96)00116-0 · Cited by 493
An experimental study of flow and heat transfer in sinusoidal wavy passages
Rush, T. A., Newell, T. A., & Jacobi, A. M. (1999) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(98)00264-6 · Cited by 333
Empirical Correlations for Heat Transfer and Flow Friction Characteristics of Rectangular Offset-Fin Plate-Fin Heat Exchangers
Wieting, A. R. (1975) · Journal of Heat Transfer · doi:10.1115/1.3450412 · Cited by 252
Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins
Yun, J.-Y., & Lee, K.-S. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00342-7 · Cited by 234
Enhanced heat transfer due to curvature-induced lateral vortices in laminar flows in sinusoidal corrugated-plate channels
Metwally, H. M., & Manglik, R. M. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2003.11.019 · Cited by 228
Heat transfer and pressure drop correlations for the wavy fin and flat tube heat exchangers
Junqi, D., Jiangping, C., Zhijiu, C., Yimin, Z., & Wenfeng, Z. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.012 · Cited by 204
Self-citation
Investigation of flow and heat transfer in corrugated passages—II. Numerical simulations
Ciofalo, M., Stąsiek, J., & Collins, M. W. (1996) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(96)85014-9 · Cited by 183

Show all 18 references

Sorted by citations

Experimental and numerical investigation of a microchannel heat sink (MCHS) with micro-scale ribs and grooves for chip cooling
Wang, G., Niu, D., Xie, F., et al. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.009 · Cited by 166
Compact and microchannel heat exchangers: A comprehensive review of air-side friction factor and heat transfer correlations
Qasem, N. A. A., & Zubair, S. M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.104 · Cited by 134
Effect of wavelength and amplitude on the performance of wavy finned absorber solar air heater
Priyam, A., & Chand, P. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.12.010 · Cited by 89
Thermo-hydraulic performance optimization of wavy fin heat exchanger by combining delta winglet vortex generators
Luo, C., Wu, S., Song, K., et al. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114343 · Cited by 80
Performance prediction of proton exchange membrane fuel cell engine thermal management system using 1D and 3D integrating numerical simulation
Zhang, Q., Xu, L., Li, J., et al. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.10.088 · Cited by 64
Optimization investigation on configuration parameters of sine wavy fin in plate-fin heat exchanger based on fluid structure interaction analysis
Wen, J., Li, K., Wang, C., Zhang, X., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.11.023 · Cited by 62
Optimization investigation on configuration parameters of serrated fin in plate-fin heat exchanger based on fluid structure interaction analysis
Wen, J., Li, K., Zhang, X., Wang, C., Wang, S., & Tu, J. Y. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.11.058 · Cited by 60
Study of thermal and hydraulic performance of air cooled minichannel heatsink with novel geometries
Kumar, S., Sarkar, M., Singh, P. K., et al. (2019) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2019.02.008 · Cited by 60
Effect of design parameters on passive control of heat transfer enhancement phenomenon in heat exchangers–A brief review
Ali, M. R., Al‐Khaled, K., Hussain, M., et al. (2022) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2022.102674 · Cited by 56
Perforated fins effect on the heat transfer rate from a circular tube by using wind tunnel: An experimental view
Nadooshan, A. A., Kalbasi, R., & Afrand, M. (2018) · Heat and Mass Transfer · doi:10.1007/s00231-018-2333-3 · Cited by 53
Numerical simulation of a solar air heater equipped with wavy and raccoon-shaped fins: The effect of fins’ height
Rahmani, E., Moradi, T., Fattahi, A., et al. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101227 · Cited by 53
Heat transfer factor j and friction factor f correlations for offset strip fin and wavy fin of compact plate-fin heat-exchangers
Kedam, N., Uglanov Dmitry, A., Evgeniy, B., et al. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101552 · Cited by 49
Thermal performance of a zig-zag channel formed by two wavy fins mounted with vortex generators
Luo, C., Song, K., Tagawa, T., et al. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106361 · Cited by 48
Numerical study of laminar flow and heat transfer characteristics in the fin side of the intermittent wavy finned flat tube heat exchanger
Duan, F., Song, K., Li, H.-R., Chang, L.-M., Zhang, Y., & Wang, L.-B. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.081 · Cited by 41
Numerical investigation on the effect of cylindrical turbulator on performance of corrugated plate-fin heat exchanger
Wang, Z., Wang, R., Li, Z., et al. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120726 · Cited by 39
EFFECTS OF GEOMETRIC PARAMETERS FOR WAVY FINNED-TUBE HEAT EXCHANGER IN TURBULENT FLOW: A CFD MODELING
Bhuiyan, A. A., Amin, M. R., Naser, J., et al. (2015) · Frontiers in Heat and Mass Transfer · doi:10.5098/hmt.6.5 · Cited by 38
Studying the fan-assisted cooling using the Taguchi approach in open and closed data centers
Song, Z. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.022 · Cited by 38
A critical review on Colburn j-factor and f-factor and energy performance analysis for finned tube heat exchangers
Ko, Y. M., Song, J. Y., Lee, J. W., Sohn, S., Song, C. H., Khoshvaght-Aliabadi, M., Kim, Y., & Kang, Y. T. (2023) · Energy · doi:10.1016/j.energy.2023.129609 · Cited by 43
State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers
Adam, A. Y., Oumer, A. N., Najafi, G., Ishak, M., Firdaus, M., & Aklilu, T. B. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08971-6 · Cited by 35
“Also, the wavy length impacts the thermal performance [19].”
Background
Numerical studies of heat transfer enhancement by cross-cut flow control in wavy fin heat exchangers
Kim, G. W., Lim, H. M., & Rhee, G. H. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.01.023 · Cited by 34
Simulation and experimental investigation of the wavy fin-and-tube intercooler
Zhang, Q., Qin, S., & Ma, R. (2016) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2016.04.003 · Cited by 34
“Dong [1] studied the thermal-hydraulic performance of a wavy fin-and-flat tube radiator.”
BackgroundResult
Airside performance of sinusoidal wavy fin-and-tube heat exchangers subject to large-diameter tubes with round or oval configuration
Chu, W., Sheu, W., Hsu, C.-C., et al. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114469 · Cited by 34
Air side Performance Characterization of Wavy Fin-and-tube Heat Exchangers Having Elliptic Tubes with Large Waffle Heights
Lee, Y.-T., Chien, L., He, J.-C., Wen, C., & Yang, A. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119220 · Cited by 33
Thermal enhancement of fin and tube heat exchanger with guiding channels and topology optimisation
Sun, C., Lewpiriyawong, N., Khoo, K. L., Zeng, S., & Lee, P. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.093 · Cited by 31
Generalized air-side friction and heat transfer correlations for wavy-fin compact heat exchangers
Qasem, N., & Zubair, S. (2019) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2018.09.010 · Cited by 29
Unified ANN model for heat transfer factor (j) and friction factor (f) prediction in offset strip and wavy fin PFHEs
Kedam, N., Uglanov, D. A., Валерьевич, Б. Е., et al. (2023) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2023.103845 · Cited by 30
Air-side thermal-hydraulic analysis and parameter optimization for vertical-fin microchannel heat exchanger
Wu, S., Zhao, R., Wei, X., Ma, Z., Huang, D., & Zhao, Y. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120297 · Cited by 29
Geometric design and optimization of extended surfaces for enhanced heat transfer: A comprehensive review
Yan, Z., Oon, C. S., Tan, B. T., & Ooi, J. B. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.106227 · Cited by 27
Contemporary trends in thermo-hydraulic testing and modeling of automotive radiators deploying nano-coolants and aerodynamically efficient air-side fins
Mukkamala, Y. S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.106 · Cited by 28
A critical review of the thermal-hydraulic performance of fin and tube heat exchangers using statistical analysis
Reshaeel, M., Abdelsamie, M. M., & Ali, M. I. H. (2024) · International Journal of Thermofluids · doi:10.1016/j.ijft.2024.100858 · Cited by 19
Three-dimensional numerical simulation of external fluid flow and heat transfer of a heat exchanger in a wind tunnel using porous media model
Moradi, I., Karimipour, A., Afrand, M., Li, Z., & Bach, Q. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-10184-1 · Cited by 22
Critical assessment of R410A alternatives for mini-split air conditioners in the Egyptian market
Zaki, O. M., & Abdelaziz, O. A. (2023) · Energy and Built Environment · doi:10.1016/j.enbenv.2023.01.003 · Cited by 22
Thermal-hydraulic performance evaluation of airside of wavy fin compact heat exchangers under wet conditions
Ejaz, F., Qasem, N. A. A., & Zubair, S. M. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.107685 · Cited by 22
Thermal performance of six different types of wavy-fins
Khaled, A. A. (2015) · International Journal of Numerical Methods for Heat & Fluid Flow · doi:10.1108/hff-06-2014-0174 · Cited by 21
Performance prediction of plate-fin radiator for low temperature preheating system of proton exchange membrane fuel cells using CFD simulation
Zhang, Q., Xu, L., Li, J., et al. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.07.210 · Cited by 20
Establishment of Colburn ‘j’ factor and Fanning friction factor ‘f’ correlations for a compact heat exchanger having perforated wavy fins using Computational Fluid Dynamics
Aujla, G., & Ranganayakulu, C. (2024) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2024.109484 · Cited by 19
Heat transfer enhancement of air flow through new types of perforated dimple/protrusion fins
Sen, P., Chen, M., & Bai, B. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124030 · Cited by 19
An experimental investigation on air-side performances of finned tube heat exchangers for indirect air-cooling tower
Du, X., Yin, Y., Zeng, M., Yu, P., Wang, Q., Dong, Z., & Chen, Y. (2014) · Thermal Science · doi:10.2298/tsci1403863d · Cited by 16
“The thermal hydraulic performances for a louvered fin and elliptical tube heat exchanger [4] and some wavy finned flat tube heat exchangers with different geometry parameters [5, 6] were investigated experimentally and numerically, respectively.”
Background
An assessment of the optimal air-side thermal-hydraulic performance of wavy-fin compact heat exchangers
Qasem, N., & Zubair, S. (2018) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2018.08.025 · Cited by 14
Numerical Design and Optimisation of a Novel Heatsink using ANSYS Steady-State Thermal Analysis
Mueller, A., Buennagel, C., Monir, S., et al. (2020) · doi:10.1109/iwed48848.2020.9069568 · Cited by 15
“The introduction of ribs, grooves, and fins [6]-[10] on micro channel heatsink has been found to be more effective in terms of improvement of cooling performance.”
Background
Performance improvement of wavy-plate heat exchanger by vortex generators with adjacent-reverse arrangement
Wan, X., Song, K., Dong, H., et al. (2025) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2025.109982 · Cited by 13
Boosting thermo-hydraulic performance in wavy plate-fin heat exchangers through ellipsoidal protrusions/dimples functioning as vortex generators
Dong, H., Gao, C., Wu, X., et al. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.129945 · Cited by 13
Signal-to-noise research on comprehensive performance of plate heat exchanger for commercial electric vehicle
Bi, J., Liu, J., liu, P., et al. (2021) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2021.106967 · Cited by 13
Heat exchange performance optimization of a wheel loader cooling system based on computational fluid dynamic simulation
Yu, C., Qin, S., Liu, Y., et al. (2018) · Advances in Mechanical Engineering · doi:10.1177/1687814018803984 · Cited by 13
Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins
Cui, M., & Song, R. (2021) · Thermal Science · doi:10.2298/tsci210718322c · Cited by 13
“In addition to the development of more efficient algorithms, it is of great importance to adopt commonly accurate formulas [6] for heat exchanger optimization [28], for which the experimentally validated computational fluid dynamic simulation approach [25, 26, 35, 36] has been widely used for the improvement of heat t…”
BackgroundMethod
The Effect of Compressible Flow on Heat Transfer Performance of Heat Exchanger by Computational Fluid Dynamics (CFD) Simulation
Yu, C., Qin, S., Chai, B., et al. (2019) · Entropy · doi:10.3390/e21090829 · Cited by 12
Effect of some parameters on the thermo-hydraulic characteristics of a channel heat exchanger with corrugated walls
Ameur, H., & Sahel, D. (2019) · Journal of Mechanical and Energy Engineering · doi:10.30464/jmee.2019.3.1.53 · Cited by 12
Performance analysis and flow visualization in a round tube heat exchanger inserted with wavy V-ribs
Jedsadaratanachai, W., & Boonloi, A. (2017) · Advances in Mechanical Engineering · doi:10.1177/1687814017724091 · Cited by 11
Optimization study of cross-cut flow control for heat transfer enhancement in wavy fin heat exchangers: Concept of cross-cut reference length
Kim, G. W., & Rhee, G. H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.021 · Cited by 11
Enhanced compactness and thermal performance of a novel double spiral finned heat exchanger: A CFD and ANN approach
Liu, J., Dmitry, A. U., Kedam, N., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.126910 · Cited by 10
Numerical study on a new spiral fin heat Exchanger's thermal-hydraulic performance
Liu, J., Uglanov, D. A., Kedam, N., et al. (2024) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2024.104895 · Cited by 10
Numerical simulation of heat transfer and flow of cooling air in triangular wavy fin channels
Minglong, N., Chen, Y., Dong, C., et al. (2014) · Journal of Central South University · doi:10.1007/s11771-014-2238-3 · Cited by 10
Experimental and numerical studies on heat transfer enhancement for air conditioner condensers using a wavy fin with a rectangular winglet
Chimres, N., Chittiphalungsri, T., Asirvatham, L. G., et al. (2020) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-020-0921-x · Cited by 10
Selective laser melting in heat exchanger development - experimental investigation of heat transfer and pressure drop characteristics of wavy fins
Kuehndel, J., Kerler, B., & Karcher, C. (2018) · Heat and Mass Transfer · doi:10.1007/s00231-018-2352-0 · Cited by 9
“[1, 3, 4] developed experimental correlations investigating the effect of geometry parameters on thermal hydraulic performance of wavy fins.”
BackgroundResultInfluential
Air-side flow and heat transfer characteristics research and empirical correlations of wavy fins in negative gauge pressure environment
Wan, R., Liu, Z., Wu, H., et al. (2022) · Experimental Heat Transfer · doi:10.1080/08916152.2022.2040654 · Cited by 9
An Experimental Study on Heat Transfer Surface Area of Wavy-Fin Heat Exchangers
Asadi, M., & Xie, G. (2014) · Journal of Thermal Science and Engineering Applications · doi:10.1115/1.4026816 · Cited by 9
Numerical investigation on various heat exchanger performances to determine an optimum configuration for charge air cooler, oil and water radiators in F1 sidepods
Salmon, P., Könözsy, L., Temple, C., & Grove, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.02.026 · Cited by 10
Performance prediction of plate fin heat exchangers: A CFD and NTU-based approach
Yang, K., Zhang, X., & Yang, H. X. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.109618 · Cited by 8
An assessment of optimal airside heat transfer per unit friction power characteristics of compact heat exchangers
Qasem, N. A. A., Al-Ghamdi, A. A., & Zubair, S. M. (2018) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2018.12.030 · Cited by 9
Research on the Optimization of a Diesel Engine Intercooler Structure Based on Numerical Simulation
Jiang, H., Wang, H., Jiang, F., et al. (2024) · Processes · doi:10.3390/pr12020276 · Cited by 7
Phase Change Process inside Toroidal Tube Heat Exchanger with Internal Fins
Patel, S., Tasnim, S. H., & Mahmud, S. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103695 · Cited by 7
Parametric and design optimization investigation of a wavy fin and tube air heat exchanger using the T‐G technique
Kumar, V., & Sahoo, R. R. (2022) · Heat Transfer · doi:10.1002/htj.22516 · Cited by 7
“Two optimal conditions and reproducibility of the results are verified by two analytical results.17 Dong et al.18 experimentally investigated a thermal‐hydraulic performance of a wavy fin and flat tube heat exchanger.”
Background
Dynamic Heat Dissipation Model of Distributed Parameters for Oil-Directed and Air-Forced Traction Transformers and Its Experimental Validation
You, Y., Shao, K., & Yi, Z. (2023) · Entropy · doi:10.3390/e25030457 · Cited by 7
A general correlation for flat tube-and-fin radiator based on parametric CFD analysis
Liu, J., Cheng, L., Pan, D., et al. (2023) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2023.2190182 · Cited by 6
“Dong et al. [20] experimentally studied the performance of a wavy FFTHE for the correlations of Nu and f , which could predict 90% of experimental data with an error below 15%.”
Background
Model-Based Performance Optimization of Thermal Management System of Proton Exchange Membrane Fuel Cell
Zhang, J., Yan, F., Du, C., et al. (2023) · Energies · doi:10.3390/en16093952 · Cited by 6
“Dong et al. [8] experimentally investigated the effect of each geometry parameter of the wavy ﬁns on thermal transmission performance; the experimental data were in high agreement with the simulation data.”
Result
Innovative mini-channel design for a compound parabolic solar thermal collector serving intermediate temperature applications
More, S. S., Sagade, A. A., Ravindranath, G., More, S., & More, S. (2023) · Energy · doi:10.1016/j.energy.2023.129044 · Cited by 6
Influences of the wavy surface inserted in the middle of a circular tube heat exchanger on thermal performance
Jedsadaratanachai, W., & Boonloi, A. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0849-8 · Cited by 6
Machine learning prediction of thermal–hydraulic (j–f) characteristics in compact heat exchangers with six fin configurations
Liu, J., Uglanov, D. A., Kedam, N., et al. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.128491 · Cited by 5
The flow field and convective heat transfer in the unit structure of heat exchangers by using acoustic waves
Ou, Y., Liu, Z., Liu, Y., et al. (2024) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2024.110587 · Cited by 5
Effect of transverse flow in porous medium on heat exchanger simulation optimization
Liu, Y., Yu, C., Qin, S., et al. (2019) · Transactions of the Canadian Society for Mechanical Engineering · doi:10.1139/tcsme-2019-0158 · Cited by 5
“Usually the fin height of heat exchanger is less than 1% of the flow direction length,and ignore the fluid medium in the direction of the fin height direction of the third tap will not cause great influence to the whole simulation [11].”
Background
Signal-to-noise ratio analysis on saw-tooth vortex generator in vehicle radiators
Liu, J., Meng, L., Liu, Y., et al. (2022) · Transactions of the Canadian Society for Mechanical Engineering · doi:10.1139/tcsme-2022-0050 · Cited by 5
Numerical modeling and thermal enhancement of finned tube heat exchanger with guiding channel and fusiform configurations
Sun, C., Lewpiriyawong, N., Khoo, K. L., Lee, P., & Chou, S. (2016) · Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems · doi:10.1109/itherm.2016.7517670 · Cited by 5
Effect of triangular cross-sectional transverse wedge on the performance of an inline tube bundle heat exchanger
Yisunzam, P., & Chinsuwan, A. (2023) · Experimental Heat Transfer · doi:10.1080/08916152.2023.2171161 · Cited by 5
Effect of Flow Attack Angle for V-Wavy Plate on Flow and Heat Transfer in a Square Channel Heat Exchanger
Boonloi, A., & Jedsadaratanachai, W. (2018) · Journal of Engineering · doi:10.1155/2018/9487070 · Cited by 4
Straight Section Influence on Thermal and Hydraulic Performances for a Wavy Air Fin in a Compact Heat Exchanger
Albețel, S., Marțian, V., & Nagi, M. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.659.283 · Cited by 3
Comparative Analysis of Airside Thermal–Hydraulic Behavior of Plain, Wavy, and Louver Fins under Humid Conditions
Ejaz, F., & Zubair, S. M. (2025) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-025-10913-4 · Cited by 3
Parametric CFD and reduced order modelling of wavy-finned flattened tube thermohydraulic performance in laminar and transitional flow
van der Spuy, S. J., Owen, M. T. F., & Pretorius, J. P. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.105054 · Cited by 2
Air side thermal performance of wavy fin heat exchangers produced by selective laser melting
Kuehndel, J., Kerler, B., & Karcher, C. (2016) · Journal of Physics Conference Series · doi:10.1088/1742-6596/745/3/032057 · Cited by 2
THREE-DIMENSIONAL NUMERICAL INVESTIGATION ON LAMINAR FORCED CONVECTION AND HEAT TRANSFER IN A CIRCULAR TUBE INSERTED WITH RIGHT TRIANGULAR WAVY SURFACES
Jedsadaratanachai, W., & Boonloi, A. (2017) · Frontiers in Heat and Mass Transfer · doi:10.5098/hmt.8.35 · Cited by 2
Experiment and simulation studies on thermal performance of a novel water-cooling premixed wall-hung gas boiler
Wang, N., Deng, S., Wang, Z., et al. (2023) · Thermal Science · doi:10.2298/tsci221017067w · Cited by 2
“Many scholars studied the thermal-hydraulic characteristics of the heat exchanger with different fin structures and got a good heat exchange effect [9-13].”
Background
Controlling the heat transfer and pressure drop within economical working conditions for a movable flat tube bundle
AbdRabo, M. F., & Pasha, K. M. K. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.03.022 · Cited by 2
3D numerical analysis on mechanisms of flow and heat transfer in a square channel with right triangular wavy surfaces
Jedsadaratanachai, W., & Boonloi, A. (2018) · Thermophysics and Aeromechanics · doi:10.1134/s0869864318030071 · Cited by 2
Numerical Optimization of Gas Cooler Geometry in Transcritical Refrigeration Cycles
URKUT, A. F., Karcı, E. O., & Özdemir, M. R. (2023) · International Journal of Advances in Engineering and Pure Sciences · doi:10.7240/jeps.1224430 · Cited by 1
An innovative modularization optimization of flat-tube-and-fin heat exchanger in LEGO pattern
Xing, J., Liu, J., Liu, N., Liu, W., Zhang, T., & Kreschel, M. (2025) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2025.103906 · Cited by 1
Data-driven design optimization of a slanted twin-flat-tube structure for vertical-finned microchannel heat exchangers
Gao, H., Xie, Z., Wu, S., Cai, J., Wang, H., Zhao, R., & Huang, D. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.131118 · Cited by 1
Parametric analysis of thermo-hydraulic performance in louver-finned multi-row circular-tube heat exchangers with rear-punched Curved Delta-winglet Vortex generators
Lin, Z.-M., Hou, Y., Wang, G.-L., & Wang, L.-B. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.111996 · Cited by 1
Numerical Study of Corrugation Amplitude Influence of a Wavy Fin in Overall Performance of a Compact Heat Exchanger
Marțian, V., Albețel, S., & Nagi, M. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.659.405 · Cited by 1
“[4], [5], [6] and Ismail [7] which are studies of similar wavy fin as the one in this paper.”
Background
Experimental study on the effects of the number of heat exchanger modules on thermal characteristics in a premixed combustion system
Yu, B., Kum, S.-M., Lee, C.-E., et al. (2016) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-1249-9 · Cited by 1
Numerical and Experimental Investigation on Heat Exchange Performance for Heat Dissipation Module for Construction Vehicles
Liu, J., Qin, S., Jiang, Y., et al. (2017) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2017-01-0624 · Cited by 1
Airside Heat Transfer and Pressure Drop on the Spiral Finned-Tube Compact Heat Exchanger with Sharp Turns
Afandi, D., Syuhada, A., & Sofyan, S. E. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-0736-3_6 · Cited by 1
NUMERICAL MODELLING OF HEAT TRANSFER AND PRESSURE DROP IN A WAVY-FINNED FLAT-TUBE HEAT EXCHANGER
van der Spuy, S. J., Owen, M. T. F., & Pretorius, J. P. (2025) · Proceeding of Second Thermal and Fluids Engineering Conference · doi:10.1615/tfec2025.cmd.055320 · Cited by 1
Comments on “Experimental study on thermal–hydraulic performance of a wavy fin-and-flat tube aluminum heat exchanger”
Awad, M. M. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114339 · Cited by 1
The amplitude influence on the thermal and hydraulic performances for a wavy air fin in a compact heat exchanger used in agriculture applications
Albețel, S., Rus, A., David, E., et al. (2020) · E3S Web of Conferences · doi:10.1051/e3sconf/202018001006 · Cited by 1
Thermal hydraulic performance of a wavy fin having two row of circular tubes
Borrajo‐Pérez, R., González‐Bayón, J. J., & Reyes-Fernández-de-Bulnes, D. (2016) · Redalyc (Universidad Autónoma del Estado de México)
Laminar Flow and Heat Transfer in a Square Channel Installed with Inclined Wavy Surface
Boonloi, A., & Jedsadaratanachai, W. (2017) · Journal of Mathematics and Statistics · doi:10.3844/jmssp.2017.159.168
“Dong et al. (2013) experimentally examined a wavy-fin-flat-tube heat exchanger on thermo-hydraulic performance.”
Background
Numerical and Experimental Research on Flow Resistance of Cool Medium from Heat Dissipation System for Construction Vehicles
Liu, J., Wang, B., Jiang, Y., & Long, H. (2018) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2018-01-0088
Farklı Tasarımlara Sahip Soğutucuların Termal Performansının İncelenmesi
Kan, M. (2023) · International Journal of Advanced Natural Sciences and Engineering Researches · doi:10.59287/ijanser.1522
Thermal-Hydraulic Performance Evaluation of Airside of Wavy Fin Compact Heat Exchangers Under Wet ConditionsPreprint
Ejaz, F., Qasem, N. A. A., & Zubair, S. M. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4784443
Deterioration of Protective Coating on Steel Structures in Harbor Attacked via Water and Sediment Erosion
Peng, B., Wu, L., Liu, M., et al. (2025) · Journal of Marine Science and Engineering · doi:10.3390/jmse13040683
Optimization of Cryogenic Plate-Fin Heat Exchangers Based on Exergy Destruction MinimizationPreprint
Gong, Z., Jiang, R., Ma, J., et al. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5822186

Authors: Dong, J., Su, L., Chen, Q., & Xu, W.
Corresponding author: Dong, Junqi
ORCID: Dong, Junqi
Su, Lin
Venue: Applied Thermal Engineering
Publisher: Elsevier BV
Published: 2013-03
Volume: 51
Issue: 1-2
Pages: 32-39
ISSN: 1359-4311 (ISSN-L)
DOI: 10.1016/j.applthermaleng.2012.09.018
OpenAlex: W2018302973
Cited by: 103
References: 18
Citations by year: 2026: 6 · 2025: 11 · 2024: 8 · 2023: 13 · 2022: 5 · 2021: 6 · 2020: 5 · 2019: 8 · 2018: 13 · 2017: 11 · 2016: 8 · 2015: 4 · 2014: 5
FWCI: 4.40
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Applied Thermal Engineering (publishedVersion)
Topics: Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer Mechanisms
Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Boiling Studies
Keywords: aluminum heat exchangers, air-side heat transfer, pressure drop, thermal-hydraulic performance, fin length, Taguchi method

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Experimental study on thermal–hydraulic performance of a wavy fin-and-flat tube aluminum heat exchanger

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks