The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Least squares support vector machine (LS-SVM)-based chiller fault diagnosis using fault indicative features
Abstract
Abstract Fault detection and diagnosis (FDD) of chillers, generally the single most energy consuming piece of building equipment, is an important but hard task where many parameters are involved, and the problem is always quite non-linear. This study proposes a least squares support vector machine (LS-SVM) model optimized by cross validation to implement FDD on a 90-ton centrifugal chiller. Four component-level and three system-level faults were investigated. The effectiveness and efficiency of the eight fault-indicative features extracted from the original 64 parameters have been validated and employed in the detailed discussions. The results indicated that as compared with the other two machine learning methods, the proposed LS-SVM model with optimization showed a better FDD performance in terms of the overall correct rate for all the samples, the individual correct rate for each fault, the diagnostic efficiency, the detection rate and the false alarm rate, etc., especially when it comes to the faults of system level where the detection and diagnosis become rather more difficult due to the system-level effect (SLE)—widespread symptoms caused throughout the system. The correct rates for system-level faults of refrigerant leak/undercharge, refrigerant overcharge and excessive oil were as high as 99.59%, 99.26% and 99.38%, respectively, and the running time was only 36.7% of that of the SVM model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Support Vector Machines and Other Kernel-based Learning Methods
Cristianini, N., & Shawe-Taylor, J. (2000) · doi:10.1017/cbo9780511801389 · Cited by 13,855
Cross-validation failure: Small sample sizes lead to large error bars
Varoquaux, G. (2018) · NeuroImage · doi:10.1016/j.neuroimage.2017.06.061 · Cited by 897
Cited by
Himeur, Y., Elnour, M., Fadli, F., Meskin, N., Petri, I., Rezgui, Y., Bensaali, F., & Amira, A. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-022-10286-2 · Cited by 541
Mirnaghi, M. S., & Haghighat, F. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110492 · Cited by 387
Machine Learning and Deep Learning in Energy Systems: A Review
Forootan, M. M., Larki, I., Zahedi, R., & Ahmadi, A. (2022) · Sustainability · doi:10.3390/su14084832 · Cited by 343
Metadata
- Authors
- Han, H., Cui, X., Fan, Y., & Qing, H.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 154
- Pages
- 540-547
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2925322067
- Cited by
- 204
- References
- 2
- FWCI
- 14.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Least squares support vector machine (LS-SVM)-based chiller fault diagnosis using fault indicative features. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2019.03.111
- The paper
- Han, H., Cui, X., Fan, Y., & Qing, H. (2019). Least squares support vector machine (LS-SVM)-based chiller fault diagnosis using fault indicative features. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2019.03.111
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.