The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Lithium-ion battery thermal management system with Al2O3/AgO/CuO nanofluids and phase change material
Abstract
Abstract Nanofluids are emerging heat transfer media. Notably, usage of these materials in electronic cooling applications exhibits many peculiar benefits. This paper attemps to analyze the battery thermal management system for pouch lithium-ion battery modules. The experiments were conducted for pure water and nanofluid type battery thermal management systems combined with copper foam filled with paraffin wax as a phase change material with massive heat storage potential. An aluminum heat sink—specifically designed for this purpose—was considered as the inlet duct. A battery surrogate was employed to simulate the heat generated by Li-ion battery at high current discharge and the onset of thermal runaway conditions. The results of experimental tests revealed that the cooling efficiency of the system based on nanofluids is improved significantly. Different oxide-nanofluid slurries were tested and among all AgO was the best candidate. The maximum temperature of the battery is reduced by about 4.1 K by AgO/water nanofluid with %2 vol concentration compared to the battery thermal management systems based on pure water. It is further found that the maximum battery temperature difference is reduced by approximately 77% in the presence of copper foam with/without phase change material. The results also proved the imperative role of active/passive system combination that benefits the advantages of both approaches at the same time.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548 · cited 1×
“[50], proposed a heat generation equation to estimate the heat generation rate in the cells of a LIB as a result of electrochemical processes, as follows: Fig.”
BackgroundSamimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Cited by
Zhang, J., Shao, D., Jiang, L., Zhang, G., Wu, H., Day, R., & Jiang, W. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112207 · Cited by 263
Progress in battery thermal management systems technologies for electric vehicles
Gharehghani, A., Rabiei, M., Mehranfar, S., Saeedipour, S., Mahmoudzadeh Andwari, A., García, A., & Reche, C. M. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114654 · Cited by 263
Wang, N., Li, C., Li, W., Chen, X., Li, Y., & Qi, D. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102771 · Cited by 183
Metadata
- Authors
- Kiani, M., Omiddezyani, S., Houshfar, E., Miremadi, S. R., Ashjaee, M., & Mahdavi Nejad, A.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 180
- Pages
- 115840
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W3047399794
- Cited by
- 159
- References
- 2
- FWCI
- 7.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lithium-ion battery thermal management system with Al2O3/AgO/CuO nanofluids and phase change material. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2020.115840
- The paper
- Kiani, M., Omiddezyani, S., Houshfar, E., Miremadi, S. R., Ashjaee, M., & Mahdavi Nejad, A. (2020). Lithium-ion battery thermal management system with Al2O3/AgO/CuO nanofluids and phase change material. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2020.115840
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.