The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Design of battery thermal management system based on phase change material and heat pipe
Abstract
In this paper, the performance of battery thermal management system (BTMS) with phase change material (PCM) and heat pipe (HP) is studied. The performance of the BTMS is compared to that of the one with solely HP, find that PCM can effectively reduce the temperature difference in battery pack. Then, the influences of the environmental parameters, the parameters of the HP and PCM on system performance are investigated using numerical method. The results show that increasing environmental convective heat transfer coefficient (h), latent heat and thickness of PCM, or decreasing ambient temperature can reduce the maximum temperature in battery pack while increasing the temperature difference. Increasing the equivalent thermal conductivity of the started HP (kHP-S) and reducing the start temperature can improve the heat dissipation of battery pack. When the melting temperature of PCM is lower than the start temperature of HP, the temperature difference of battery pack is large. Furthermore, to improve the temperature uniformity in battery pack, an effective strategy for optimizing the thickness distribution of PCM is proposed without increasing the system volume and investment. The optimized results under different conditions show that adjusting the thickness distribution of PCM can effectively improve the system performance when kHP-S is small and h is moderate. The maximum temperature difference in battery pack is reduced by 30% after the optimization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Jiang, Z. Y., & Qu, Z. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.043 · Cited by 380
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Cited by
Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132741 · Cited by 813
Self-citationThermal behaviour and thermal runaway propagation in lithium-ion battery systems – A critical review
Mallick, S., & Gayen, D. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106894 · Cited by 372
A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM
Murali, G., Sravya, G. S. N., Jaya, J., & Naga Vamsi, V. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111513 · Cited by 325
Weng, J., Huang, Q., Li, X., Zhang, G., Ouyang, D., Chen, M., Yuen, A. C. Y., Li, A., Lee, E. W. M., Yang, W., et al. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.09.007 · Cited by 297
Metadata
- Authors
- Chen, K., Hou, J., Song, M., Wang, S., Wu, W., & Zhang, Y.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 188
- Pages
- 116665
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W3126656122
- Cited by
- 226
- References
- 2
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design of battery thermal management system based on phase change material and heat pipe. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2021.116665
- The paper
- Chen, K., Hou, J., Song, M., Wang, S., Wu, W., & Zhang, Y. (2021). Design of battery thermal management system based on phase change material and heat pipe. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2021.116665
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.