The DOI matches its Crossref record; 91 of the 91 references it cites were found in a registry or an index.
Additive manufacturing of heat exchangers in aerospace applications: a review
Open accessAbstract
The current review is mainly focused on exploring Additive Manufacturing (AM) methods suitable for the fabrication of complex-shaped compact Heat Exchangers (HXs) used in the aerospace industry. The introduction of Additive Manufacturing technologies, thanks to the freedom of design and the ability to produce topologically optimised complex parts, aims at the production of high-efficiency Heat Exchangers. These new Heat Exchangers are characterised by very thin features and a substantial reduction in the weight of the parts compared to the products conventionally manufactured, maintaining a leak-proof structure and excellent mechanical properties. The current L-PBF systems along with software packages are not yet fully ready for the creation of thin leak-proof features needed for highly efficient complex-shaped compact Heat Exchangers and most of the studies in the literature are in the initial development stages. This literature review is covering the current advanced manufacturing technologies which can be employed to manufacture the new generation of compact Heat Exchangers, with particular reference to the Laser-Powder Bed Fusion. The advantages and the current challenges of the Additive Manufacturing processes are described. Furthermore, the state-of-art of topological optimisation and CFD analysis as design tools to support the production of additively manufactured were critically analysed. Finally, new criteria of how to down-select compact Heat Exchanger materials for Additive Manufacturing in the aerospace industrial sector are presented, with particular attention to Aluminium alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2016) · CRC Press eBooks · doi:10.1201/9781315380476 · Cited by 13,921
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Additive Manufacturing Technologies
Gibson, I., Rosen, D., Stucker, B., & Khorasani, M. (2021) · Springer eBooks · doi:10.1007/978-3-030-56127-7 · Cited by 1,873
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Self-consistent optical parameters of intrinsic silicon at 300K including temperature coefficients
Green, M. A. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.06.009 · Cited by 1,336
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Self-citationA review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Cited by
Cortis, D., Pilone, D., Grazzi, F., Broggiato, G., Campana, F., Orlandi, D., Shinohara, T., & Planell, O. S. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-024-00761-3 · Cited by 13
Metadata
- Authors
- Careri, F., Khan, R. H. U., Todd, C., & Attallah, M. M.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2023-11
- Volume
- 235
- Pages
- 121387
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W4386002940
- Cited by
- 320
- References
- 91
- FWCI
- 31.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing of heat exchangers in aerospace applications: a review. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2023.121387
- The paper
- Careri, F., Khan, R. H. U., Todd, C., & Attallah, M. M. (2023). Additive manufacturing of heat exchangers in aerospace applications: a review. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2023.121387
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.