The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Effects of annealing on properties of ZnO thin films prepared by electrochemical deposition in chloride medium
Open accessAbstract
The development of cost-effective and low-temperature synthesis techniques for the growth of high-quality zinc oxide thin films is paramount for fabrication of ZnO-based optoelectronic devices, especially ultraviolet (UV)-light-emitting diodes, lasers and detectors. We demonstrate that the properties, especially UV emission, observed at room temperature, of electrodeposited ZnO thin films from chloride medium (at 70 °C) on fluor-doped tin oxide (FTO) substrates is strongly influenced by the post-growth thermal annealing treatments. X-ray diffraction (XRD) measurements show that the films have preferably grown along (0 0 2) direction. Thermal annealing in the temperature range of 150–400 °C in air has been carried out for these ZnO thin films. The as-grown films contain chlorine which is partially removed after annealing at 400 °C. Morphological changes upon annealing are discussed in the light of compositional changes observed in the ZnO crystals that constitute the film. The optical quality of ZnO thin films was improved after post-deposition thermal treatment at 150 °C and 400 °C in our experiments due to the reducing of defects levels and of chlorine content. The transmission and absorption spectra become steeper and the optical bandgap red shifted to the single-crystal value. These findings demonstrate that electrodeposition have potential for the growth of high-quality ZnO thin films with reduced defects for device applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Cited by
Rapid Fabrication Technique for Interpenetrated ZnO Nanotetrapod Networks for Fast UV Sensors
Gedamu, D., Paulowicz, I., Kaps, S., Lupan, O., Wille, S., Haidarschin, G., Mishra, Y. K., & Adelung, R. (2014) · Advanced Materials · doi:10.1002/adma.201304363 · Cited by 484
Self-citationChow, L., Lupan, O., Chai, G., Khallaf, H., Ono, L. K., Roldan Cuenya, B., Tiginyanu, I. M., Ursaki, V. V., Sontea, V., & Schulte, A. (2013) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2012.09.006 · Cited by 266
Self-citationSynthesis and Characterization of Ag- or Sb-Doped ZnO Nanorods by a Facile Hydrothermal Route
Lupan, O., Chow, L., Ono, L. K., Cuenya, B. R., Chai, G., Khallaf, H., Park, S., & Schulte, A. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp910263n · Cited by 265
Self-citationFabrication of nanostructured ZnO thin films based NO 2 gas sensor via SILAR technique
Patil, V. L., Vanalakar, S. A., Patil, P. S., & Kim, J. H. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.08.130 · Cited by 260
Metadata
- Authors
- Lupan, O., Pauporté, T., Chow, L., Viana, B., Pellé, F., Ono, L. K., Roldan Cuenya, B., & Heinrich, H.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2010-01
- Volume
- 256
- Issue
- 6
- Pages
- 1895-1907
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W1986263383
- Cited by
- 459
- References
- 2
- FWCI
- 9.41
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.