The DOI matches its Crossref record.
Comparison between FTIR and XPS characterization of amino acid glycine adsorption onto diamond-like carbon (DLC) and silicon doped DLC
Open accessAbstract
Diamond-like carbon (DLC) coatings are extremely useful for creating biocompatible surfaces on medical implants. DLC and silicon doped DLC synthesized on silicon wafer substrate by using plasma enhanced chemical vapour deposition (PECVD). The adsorption of glycine onto prepared samples has been investigated with a range of surface analysis techniques. The effects of surface morphology on the interaction of glycine with doped and undoped DLC films have been investigated. The chemical composition of the surface before and after adsorption was analyzed using X-ray photoelectron spectroscopy (XPS). For undoped DLC the spectra show peaks at 285 eV (C 1s), 532 eV (O 1s) and in the case of Si-doped DLC films a band at �100 eV (Si 2p) is observed. Following exposure to solutions containing (0.001 M) glycine, for undoped DLC the peaks at �285.0, �399 and �532 eV reduced in intensity and for Si-DLC samples, the peak at 100 eV was reduced. This gives an indication of the quantitative change in the amounts of C, N and O on the surfaces. From Fourier transform infrared (FTIR) spectrum, the peaks occur the following functional groups were assigned as COOR, COO, NH3 +, NH2, CH and CCN. Both XPS and FTIR spectroscopy confirm that glycine was bound onto the surfaces of the DLC and Si-DLC films via interaction of ionized carboxyl groups and the amino group did not play a significant role in the adsorption of glycine. These results from SE show that an adsorbed layer of glycine is higher at low silicon doping whilst increased doping levels led to a reduced adsorption compared to undoped DLC. Therefore doping of DLC may provide an approach to controlling the protein adsorption. © 2013 Elsevier B.V. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Shi, Z.-T., Kang, W., Xu, J., Sun, Y.-W., Jiang, M., Ng, T.-W., Xue, H.-T., Yu, D. Y. W., Zhang, W., & Lee, C.-S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.009 · Cited by 355
Ge, G., Zhang, Y.-Z., Zhang, W., Yuan, W., El-Demellawi, J. K., Zhang, P., Di Fabrizio, E., Dong, X., & Alshareef, H. N. (2021) · ACS Nano · doi:10.1021/acsnano.0c07998 · Cited by 297
Zhang, J., Kang, W., Jiang, M., You, Y., Cao, Y., Ng, T.-W., Yu, D. Y. W., Lee, C.-S., & Xu, J. (2017) · Nanoscale · doi:10.1039/c6nr09166k · Cited by 127
Liu, M., & Gadikota, G. (2020) · Fuel · doi:10.1016/j.fuel.2020.117887 · Cited by 87
Liu, M., Hohenshil, A., & Gadikota, G. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c04346 · Cited by 49
Metadata
- Authors
- Ahmed, M. H., Byrne, J. A., McLaughlin, J. A. D., Elhissi, A., & Ahmed, W.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2013-05
- Volume
- 273
- Pages
- 507-514
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2005129436
- Cited by
- 170
- References
- 0
- FWCI
- 5.00
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison between FTIR and XPS characterization of amino acid glycine adsorption onto diamond-like carbon (DLC) and silicon doped DLC. https://app.cochat.ai/papers/10.1016/j.apsusc.2013.02.070
- The paper
- Ahmed, M. H., Byrne, J. A., McLaughlin, J. A. D., Elhissi, A., & Ahmed, W. (2013). Comparison between FTIR and XPS characterization of amino acid glycine adsorption onto diamond-like carbon (DLC) and silicon doped DLC. Applied Surface Science. https://doi.org/10.1016/j.apsusc.2013.02.070
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.