The DOI matches its Crossref record.
Facile synthesis of silicon carbide-titanium dioxide semiconducting nanocomposite using pulsed laser ablation technique and its performance in photovoltaic dye sensitized solar cell and photocatalytic water purification
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Incorporation of SiC in SiC-TiO2 nanoparticles enhanced photocatalytic MO degradation efficiency by about 77%.
“The incorporation of SiC enhanced the catalytic activity by improving the MO degradation efficiency by about 77%”
From Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications (2022) · cites this paper as [188]
The photon conversion efficiency of a DSSC fabricated with SiC-TiO2 was enhanced from 0.6% to 1.65%, attributed to improved electron transfer ability of SiC.
“the photon conversion efficiency of fabricated DSSC was enhanced from 0.6% to 1.65%, which was attributed to the improved electron transfer ability of SiC.”
From Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications (2022) · cites this paper as [188]
Citations
Cites
No references could be resolved yet.
Research works printed but not linked: 46
- Karunakaran, 2011, Preparation and characterization of ZnO–TiO2 nanocomposite for photocatalytic disinfection of bacteria and detoxification of cyanide under visible light, Mater. Res. Bull., 46, 1586, 10.1016/j.materresbull.2011.06.019 · DOI
- Bagwasi, 2013, Synthesis, characterization and application of bismuth and boron co-doped TiO2: a visible light active photocatalyst, Chem. Eng. J., 217, 108, 10.1016/j.cej.2012.11.080 · DOI
- Deng, 2012, Preparation of conductive polypyrrole/TiO2 nanocomposite via surface molecular imprinting technique and its photocatalytic activity under simulated solar light irradiation, Colloids Surf. A Physicochem. Eng. Asp., 395, 183, 10.1016/j.colsurfa.2011.12.029 · DOI
- Habib, 2013, Synthesis and characterization of ZnO–TiO2 nanocomposites and their application as photocatalysts, Int. Nano Lett., 3, 1, 10.1186/2228-5326-3-5 · DOI
- Qiang, 2015, Superior environment resistance of quartz crystal microbalance with anatase TiO2/ZnO nanorod composite films, Appl. Surf. Sci., 347, 755, 10.1016/j.apsusc.2015.04.132 · DOI
- Yamashita, 2007, Design of TiO2–SiC photocatalyst using TiC–SiC nano-particles for degradation of 2-propanol diluted in water, Catal. Today, 120, 163, 10.1016/j.cattod.2006.07.038 · DOI
- Mahmoudian, 2011, Synthesis and characterization of polypyrrole/Sn-doped TiO2 nanocomposites (NCs) as a protective pigment, Appl. Surf. Sci., 257, 8317, 10.1016/j.apsusc.2011.03.075 · DOI
- Casady, 1996, Status of silicon carbide (SiC) as a wide-bandgap semiconductor for high-temperature applications: a review, Solid State Electron., 39, 1409, 10.1016/0038-1101(96)00045-7 · DOI
- Beiyue, 2009, Phase composition of SiC–ZrO2 composite materials synthesized from zircon doped with La2O3, J. Rare Earths, 27, 806, 10.1016/S1002-0721(08)60339-7 · DOI
- Huq, 1992, Fracture toughness measurements on SiC/Al2O3 composite, J. Mater. Sci., 27, 5989, 10.1007/BF01133741 · DOI
- Mohammad-Rahimi, 2011, Sintering of Al2O3–SiC composite from sol–gel method with MgO, TiO2 and Y2O3 addition, Ceram. Int., 37, 1681, 10.1016/j.ceramint.2011.01.035 · DOI
- Mohapatra, 2012, A study on sintered TiO2 and TiO2/SiC composites synthesized through chemical reaction based solution method, J. Compos. Mater., 47, 3081, 10.1177/0021998312462430 · DOI
- Anuar, 2006, Development of SiC/MgO distributed bragg reflector using RF magnetron sputtering technique, 2006 IEEE International Conference on Semiconductor Electronics, 378, 10.1109/SMELEC.2006.381085 · DOI
- Ahmad, 2014, The use of silicon carbide as scattering layer in dye sensitized solar cell (DSSC), J. Ovonic Res., 10, 109
- Hao, 2014, Synergistic photocatalytic effect of TiO2 coatings and p-type semiconductive SiC foam supports for degradation of organic contaminant, Appl. Catal. B Environ., 144, 196, 10.1016/j.apcatb.2013.07.016 · DOI
- Hao, 2013, Photocatalytic activities of TiO2 coated on different semiconductive SiC foam supports, J. Mater. Sci. Technol., 29, 1074, 10.1016/j.jmst.2013.08.021 · DOI
- Gondal, 2015, Synthesis of green TiO2/ZnO/CdS hybrid nano-catalyst for efficient light harvesting using an elegant pulsed laser ablation in liquids method, Appl. Surf. Sci., 357, 2217, 10.1016/j.apsusc.2015.09.213 · DOI
- Ge, 2009, Photocatalytic degradation of methyl orange using ZnO/TiO2 composites, Front. Environ. Sci. Eng. China, 3, 271, 10.1007/s11783-009-0035-2 · DOI
- Amendola, 2013, What controls the composition and the structure of nanomaterials generated by laser ablation in liquid solution?, Phys. Chem. Chem. Phys., 15, 3027, 10.1039/C2CP42895D · DOI · Paper page
- Dai, 2012, Pulsed laser deposition of CdSe quantum dots on Zn2SnO4 nanowires and their photovoltaic applications, Nano Lett., 12, 4187, 10.1021/nl301761w · DOI
- Gondal, 2016, A rapid and cost-effective laser based synthesis of high purity cadmium selenide quantum dots, J. Nanosci. Nanotechnol., 16, 867, 10.1166/jnn.2016.10624 · DOI
- Gondal, 2012, Synthesis of nickel oxide nanoparticles using pulsed laser ablation in liquids and their optical characterization, Appl. Surf. Sci., 258, 6982, 10.1016/j.apsusc.2012.03.147 · DOI
- Saleh, 2012, Optical properties of bismuth oxide nanoparticles synthesized by pulsed laser ablation technique, nanomaterials by laser processing, Sci. Technol. Adv. Mater., 4, 507
- Muniz-Miranda, 2011, Surface-enhanced Raman scattering from copper nanoparticles obtained by laser ablation, J. Phys. Chem. C, 115, 5021, 10.1021/jp1086027 · DOI
- Usui, 2005, Photoluminescence of ZnO nanoparticles prepared by laser ablation in different surfactant solutions, J. Phys. Chem. B, 109, 120, 10.1021/jp046747j · DOI
- Choi, 2011, Brush-shaped ZnO heteronanorods synthesized using thermal-assisted pulsed laser deposition, ACS Appl. Mater. Interfaces, 3, 4682, 10.1021/am201106v · DOI
- Gondal, 2013, CO2 conversion into methanol using granular silicon carbide (α6H-SiC): a comparative evaluation of 355nm laser and xenon mercury broad band radiation sources, Catal. Lett., 143, 108, 10.1007/s10562-012-0916-z · DOI
- Berjoan, 1992, AES study of the SiO2/SiC interface in the oxidation of CVD β-SiC, Surf. Sci., 271, 237, 10.1016/0039-6028(92)90879-B · DOI
- Wei, 2008, The synthesis and ultraviolet photoluminescence of 6H–SiC nanowires by microwave method, J. Phys. D Appl. Phys., 41, 235102, 10.1088/0022-3727/41/23/235102 · DOI
- Gondal, 2012, Pulsed laser-induced photocatalytic reduction of greenhouse gas CO2 into methanol: a value-added hydrocarbon product over SiC, J. Environ. Sci. Health A, 47, 1571, 10.1080/10934529.2012.680419 · DOI
- Kaneko, 2005, FTIR analysis of a-SiC:H films grown by plasma enhanced CVD, J. Cryst. Growth, 275, 1097, 10.1016/j.jcrysgro.2004.11.128 · DOI
- Huang, 2012, Synthesis of neutral SiO2/TiO2 hydrosol and its application as antireflective self-cleaning thin film, Int. J. Photoenergy, 2012, 8, 10.1155/2012/620764 · DOI
- Franzen, 1976, XPS spectra of some transition metal and alkaline earth monochalcogenides, J. Solid State Chem., 18, 363, 10.1016/0022-4596(76)90119-5 · DOI
- Castillo, 1996, Influence of the amount of titania on the texture and structure of titania supported on silica, J. Catal., 161, 524, 10.1006/jcat.1996.0214 · DOI
- Johansson, 1996, Electronic structure of 6H-SiC(0001), Phys. Rev. B, 53, 13803, 10.1103/PhysRevB.53.13803 · DOI
- Maruyama, 2011, Carbon nanotubes synthesis, characterization, applications, InTech
- Netterfield, 1989, Ion-assisted deposition of mixed TiO2–SiO2 films, J. Appl. Phys., 66, 1805, 10.1063/1.344352 · DOI
- Moulder, 1992, pp.45
- Narushima, 1997, High-temperature oxidation of silicon carbide and silicon nitride, Mater. Trans. JIM, 38, 821, 10.2320/matertrans1989.38.821 · DOI
- Watari, 2003, Effect of grain boundaries on thermal conductivity of silicon carbide ceramic at 5 to 1300K, J. Am. Ceram. Soc., 86, 1812, 10.1111/j.1151-2916.2003.tb03563.x · DOI
- Wong, 1997, Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes, Science, 277, 1971, 10.1126/science.277.5334.1971 · DOI
- Deng, 2006, Field emission study of SiC nanowires/nanorods directly grown on SiC ceramic substrate, Appl. Phys. Lett., 89, 023118, 10.1063/1.2220481 · DOI
- Pan, 2000, Oriented silicon carbide nanowires: synthesis and field emission properties, Adv. Mater., 12, 1186, 10.1002/1521-4095(200008)12:16<1186::AID-ADMA1186>3.0.CO;2-F · DOI
- Shim, 2009, Strong friction of silicon carbide nanowire films, Nanotechnology, 20, 025704, 10.1088/0957-4484/20/2/025704 · DOI
- Han, 2007, Low-temperature in situ large strain plasticity of ceramic SiC nanowires and its atomic-scale mechanism, Nano Lett., 7, 452, 10.1021/nl0627689 · DOI
- Garcia, 2001, Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles, Surf. Coat. Technol., 148, 171, 10.1016/S0257-8972(01)01336-6 · DOI
Cited by
Sorted by citations
Theerthagiri, J., Karuppasamy, K., Lee, S. J., Shwetharani, R., Kim, H.-S., Pasha, S. K. K., Ashokkumar, M., & Choi, M. Y. (2022) · Light: Science & Applications · doi:10.1038/s41377-022-00904-7 · Cited by 461
Pulsed Laser in Liquids Made Nanomaterials for Catalysis
Forsythe, R. C., Cox, C. P., Wilsey, M. K., & Müller, A. M. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01069 · Cited by 259
Metadata
- Authors
- Gondal, M. A., Ilyas, A. M., & Baig, U.
- Affiliations
- King Fahd University of Petroleum and Minerals (SA)
- Corresponding author
- Gondal, M.A.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2016-08
- Volume
- 378
- Pages
- 8-14
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2297983703
- Cited by
- 51
- References
- 0
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 5 · 2023: 2 · 2022: 6 · 2021: 3 · 2020: 6 · 2019: 8 · 2018: 9 · 2017: 5 · 2016: 4
- FWCI
- 2.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Applied Surface Science (publishedVersion)
- Funders
- Laser Research Group (LRG), Physics Department, King Fahd University of Petroleum and Minerals (KFUPM), Saudi Arabia
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
- Keywords
- silicon carbide, titanium dioxide, pulsed laser ablation in liquid, dye-sensitized solar cells, photocatalytic water treatment, methyl orange degradation, photoanodes, charge separation, electron transfer, Nd:YAG laser, photoelectric conversion efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review