The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Enhanced photocatalytic degradation of methylene blue dye using CuS CdS nanocomposite under visible light irradiation
Abstract
The inorganic nanoparticles based semiconductor photocatalyst has attracted widespread attention for the practical applications in sustainable energy and environmental remediation due to its low cost, eco-friendly, high efficiency and ease of process. CuS, CdS and CuS CdS nanocomposite photocatalysts have been successfully synthesized by a simple hydrothermal approach. The phase purity, composition and surface morphology of as synthesized nanomaterials were characterized using various analytical techniques. The photocatalytic activities of the as-prepared materials have been evaluated by the degradation of methylene blue (MB) dye in the presence of hydrogen peroxide (H2O2) which served as an oxidant under visible light irradiation. MB dye (10 ppm) was degraded by about 80%, 59% and 99.97% for CuS, CdS and CuS CdS nanocomposite respectively at 10 min. The results demonstrate that CuS CdS nanocomposite exhibited excellent photocatalytic activity as compared to the CuS and CdS is which mainly attributed to large surface area, narrow band gap, high adsorbing capacity of the dye and also low recombination of the photo-generated electrons and holes. Further, electrochemical impedance (EI) measurement revealed that as prepared CuS CdS nanocomposite suggested that as compared to CuS and CdS, the CuS CdS nanocomposite exhibits rapid migration of photo-induced charge carriers. In addition, the CuS CdS nanocomposite demonstrated that good stability towards photocatalytic degradation even after repeated usage. Finally, a suitable photocatalytic reaction mechanism has been proposed to indicate the photocatalytic performance of the nanocomposite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Theerthagiri, J., Senthil, R. A., Malathi, A., Selvi, A., Madhavan, J., & Ashokkumar, M. (2015) · RSC Advances · doi:10.1039/c5ra06512g · Cited by 148
Cited by
Marimuthu, S., Antonisamy, A. J., Malayandi, S., Rajendran, K., Tsai, P.-C., Pugazhendhi, A., & Ponnusamy, V. K. (2020) · Journal of Photochemistry and Photobiology B: Biology · doi:10.1016/j.jphotobiol.2020.111823 · Cited by 429
Photocatalysis for removal of environmental pollutants and fuel production: a review
Saravanan, A., Kumar, P. S., Vo, D.-V. N., Yaashikaa, P. R., Karishma, S., Jeevanantham, S., Gayathri, B., & Bharathi, V. D. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01077-8 · Cited by 289
Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration
Zhang, S., Malik, S., Ali, N., Khan, A., Bilal, M., & Rasool, K. (2022) · Topics in Current Chemistry · doi:10.1007/s41061-022-00397-3 · Cited by 50
Metadata
- Authors
- Mahanthappa, M., Kottam, N., & Yellappa, S.
- Venue
- Applied Surface Science
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 475
- Pages
- 828-838
- ISSN
- 0169-4332 (ISSN-L)
- OpenAlex
- W2903681825
- Cited by
- 172
- References
- 1
- FWCI
- 3.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.