The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Mesoporous magnetic biochar composite for enhanced adsorption of malachite green dye: Characterization, adsorption kinetics, thermodynamics and isotherms
Abstract
This study aimed to prepare a corn straw-derived biochar supported nZVI magnetic composite (nZVI/BC) and evaluate its efficiency in adsorption of malachite green dye (MG). The prepared nZVI/BC composite was characterized by XRD, FTIR, TEM, TEM-EDS, VSM, XPS, TGA, zeta potential and BET surface area. The prepared mesoporous composite showed enhanced efficiency for the adsorption of MG dye. Adsorption models and kinetic results indicated that the adsorption of MG onto nZVI/BC composite was more fitted to Langmuir isotherm and follows second order kinetics. Intraparticle diffusion model indicated that the adsorption follows a three steps mechanism. The maximum adsorption capacity of nZVI/BC composite (515.77 mg MG/g composite) was much higher than most of reported biochar adsorbents. The removal process of MG onto nZVI/BC composite does not only proceed via adsorption mechanism, but also through an oxidative degradation mechanism. The Magnetic character of the biochar enables its easy separation and reuse for many cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Li, X.-Q., Elliott, D. W., & Zhang, W.-X. (2006) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408430601057611 · Cited by 1,058
Characterization of zero-valent iron nanoparticles
Sun, Y.-P., Li, X.-Q., Cao, J., Zhang, W.-X., & Wang, H. P. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2006.03.001 · Cited by 988
Effect of pyrolysis temperature, heating rate, and residence time on rapeseed stem derived biochar
Zhao, B., O'Connor, D., Zhang, J., Peng, T., Shen, Z., Tsang, D. C. W., & Hou, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.013 · Cited by 843
Biochar modification to enhance sorption of inorganics from water
Sizmur, T., Fresno, T., Akgül, G., Frost, H., & Moreno-Jiménez, E. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.082 · Cited by 733
Dong, H., Deng, J., Xie, Y., Zhang, C., Jiang, Z., Cheng, Y., Hou, K., & Zeng, G. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.03.002 · Cited by 638
Li, X.-Q., & Zhang, W.-X. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0702189 · Cited by 619
Jang, H. M., Yoo, S., Choi, Y.-K., Park, S., & Kan, E. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.03.013 · Cited by 580
Selection of optimum sorption isotherm
Ho, Y. (2004) · Carbon · doi:10.1016/j.carbon.2004.03.019 · Cited by 565
Sartape, A. S., Mandhare, A. M., Jadhav, V. V., Raut, P. D., Anuse, M. A., & Kolekar, S. S. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.12.019 · Cited by 519
Cited by
Carbon based materials: a review of adsorbents for inorganic and organic compounds
Sabzehmeidani, M. M., Mahnaee, S., Ghaedi, M., Heidari, H., & Roy, V. A. L. (2021) · Materials Advances · doi:10.1039/d0ma00087f · Cited by 646
Qiu, B., Shao, Q., Shi, J., Yang, C., & Chu, H. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121925 · Cited by 646
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Adsorption of organic dyes from wastewater by metal-doped porous carbon materials
Xiao, W., Jiang, X., Liu, X., Zhou, W., Garba, Z. N., Lawan, I., Wang, L., & Yuan, Z. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124773 · Cited by 402
Eltaweil, A. S., Elgarhy, G. S., El-Subruiti, G. M., & Omer, A. M. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.03.122 · Cited by 382
Self-citationMethods to prepare biosorbents and magnetic sorbents for water treatment: a review
Osman, A. I., El-Monaem, E. M. A., Elgarahy, A. M., Aniagor, C. O., Hosny, M., Farghali, M., Rashad, E., Ejimofor, M. I., López-Maldonado, E. A., Ihara, I., et al. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01603-4 · Cited by 329
Self-citationPerspectives of Engineered Biochar for Environmental Applications: A Review
Haghighi Mood, S., Pelaez-Samaniego, M. R., & Garcia-Perez, M. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01201 · Cited by 104
Metadata
- Authors
- Eltaweil, A. S., Ali Mohamed, H., Abd El-Monaem, E. M., & El-Subruiti, G. M.
- Venue
- Advanced Powder Technology
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 31
- Issue
- 3
- Pages
- 1253-1263
- ISSN
- 0921-8831 (ISSN-L)
- OpenAlex
- W2999312880
- Cited by
- 406
- References
- 47
- FWCI
- 18.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.