The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Use of response surface methodology for optimization of fluoride adsorption in an aqueous solution by Brushite
Open accessAbstract
In the present study, Response surface methodology (RSM) was employed for the removal of fluoride on Brushite and the process parameters were optimized. Four important process parameters including initial fluoride concentration (40–50 mg/L), pH (4–11), temperature (10–40 °C) and B dose (0.05–0.15 g) were optimized to obtain the best response of fluoride removal using the statistical Box–Behnken design. The experimental data obtained were analyzed by analysis of variance (ANOVA) and fitted to a second-order polynomial equation using multiple regression analysis. Numerical optimization applying desirability function was used to identify the optimum conditions for maximum removal of fluoride. The optimum conditions were found to be initial concentration = 49.06 mg/L, initial solution pH = 5.36, adsorbent dose = 0.15 g and temperature = 31.96 °C. A confirmatory experiment was performed to evaluate the accuracy of the optimization procedure and maximum fluoride removal of 88.78% was achieved under the optimized conditions. Several error analysis equations were used to measure the goodness-of-fit. Kinetic studies showed that the adsorption followed a pseudo-second order reaction. The equilibrium data were analyzed using Langmuir, Freundlich, and Sips isotherm models at different temperatures. The Langmuir model was found to be describing the data. The adsorption capacity from the Langmuir isotherm ( Q L ) was found to be 29.212, 35.952 and 36.260 mg/g at 298, 303, and 313 K respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
Kinetics of Adsorption on Carbon from Solution
Weber, W. J., & Morris, J. C. (1963) · Journal of the Sanitary Engineering Division · doi:10.1061/jsedai.0000430 · Cited by 9,844
Response Surface Methodology: Process and Product Optimization Using Designed Experiments
Gunst, R. F., Myers, R. H., & Montgomery, D. C. (1996) · Technometrics · doi:10.2307/1270613 · Cited by 9,530
Über die adsorption in lösungen
Freundlich, H. (1907) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-1907-5723 · Cited by 9,001
Simultaneous Optimization of Several Response Variables
Derringer, G., & Suich, R. (1980) · Journal of Quality Technology · doi:10.1080/00224065.1980.11980968 · Cited by 5,212
About the Theory of So-Called Adsorption of Soluble Substances
Lagergren, S. K. (1898) · Medical Entomology and Zoology · Cited by 5,210
The constitution and fundamental properties of solids and liquids
Langmuir, I. (1917) · Journal of the Franklin Institute · doi:10.1016/s0016-0032(17)90938-x · Cited by 3,778
On the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650
(1907) · Zeitschrift für Chemie und Industrie der Kolloide · doi:10.1007/bf01501332 · Cited by 3,439
Response Surface Methodology: Process and Product Optimization Using Designed Experiments
Gunst, R. F. (1996) · Technometrics · doi:10.1080/00401706.1996.10484509 · Cited by 3,255
Box-Behnken design: An alternative for the optimization of analytical methods
Ferreira, S. L. C., Bruns, R. E., Ferreira, H. S., Matos, G. D., David, J. M., Brandão, G. C., da Silva, E. G. P., Portugal, L. A., dos Reis, P. S., Souza, A. S., et al. (2007) · Analytica Chimica Acta · doi:10.1016/j.aca.2007.07.011 · Cited by 3,214 · cited 1×
“Compared to the central composite and Doehelrt designs, Box–Behnken presents some advantages such as requiring few experimental points for its application (three levels per factor) and high efficiency (Ferreira et al., 2007).”
BackgroundKhataee, A. R., Fathinia, M., Aber, S., & Zarei, M. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.05.096 · Cited by 301
Defluoridation from aqueous solutions by granular ferric hydroxide (GFH)
Kumar, E., Bhatnagar, A., Ji, M., Jung, W., Lee, S.-H., Kim, S.-J., Lee, G., Song, H., Choi, J.-Y., Yang, J.-S., et al. (2009) · Water Research · doi:10.1016/j.watres.2008.10.031 · Cited by 292
Defluoridation from aqueous solutions by nano-alumina: Characterization and sorption studies
Kumar, E., Bhatnagar, A., Kumar, U., & Sillanpää, M. E. T. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.11.102 · Cited by 275
Kinetic Model for Lead(II) Sorption on to Peat
Ho, Y. S., & McKay, G. (1998) · Adsorption Science & Technology · doi:10.1177/026361749801600401 · Cited by 235
The investigation of kinetic and isotherm of fluoride adsorption onto functionalize pumice stone
Asgari, G., Roshani, B., & Ghanizadeh, G. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.03.003 · Cited by 217
Liu, Y., Wang, J., Zheng, Y., & Wang, A. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.049 · Cited by 190
Design of eutectic photoinitiator blends for UV/visible curable acrylated printing inks and coatings
Segurola, J., Allen, N. S., Edge, M., et al. (1999) · Progress in Organic Coatings · doi:10.1016/s0300-9440(99)00052-1 · Cited by 164
Fluoride removal performance of a new hybrid sorbent of Zr(IV)–ethylenediamine
Swain, S. K., Mishra, S., Patnaik, T., Patel, R. K., Jha, U., & Dey, R. K. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.12.091 · Cited by 118
Decolorization of organic dye solution by ozonation; Optimization with response surface methodology
Kasiri, M. B., Modirshahla, N., & Mansouri, H. (2013) · International Journal of Industrial Chemistry · doi:10.1186/2228-5547-4-3 · Cited by 107
Selective sorption of fluoride using Fe(III) loaded carboxylated chitosan beads
Viswanathan, N., & Meenakshi, S. (2008) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2008.03.005 · Cited by 106
Kayan, B., & Gözmen, B. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.11.045 · Cited by 95
Process optimization for Cr(VI) adsorption onto activated carbons by experimental design
Özdemir, E., Duranoğlu, D., Beker, Ü., & Tuna, A. Ö. A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.05.091 · Cited by 89
Effect of H3PO4 reactant and NaF additive on the crystallization and properties of brushite
Sekar, C., & Suguna, K. (2011) · Advanced Materials Letters · doi:10.5185/amlett.2011.1217 · Cited by 9
Cited by
Yadav, K. K., Gupta, N., Kumar, V., Khan, S. A., & Kumar, A. (2018) · Environment International · doi:10.1016/j.envint.2017.11.014 · Cited by 261
Efficient CO2 adsorption by deoiled flaxseed hydrochar
Arefizadeh, M., Behvandi, D., Shahhosseini, S., & Ghaemi, A. (2024) · Scientific Reports · doi:10.1038/s41598-024-78177-w · Cited by 4
Metadata
- Authors
- Mourabet, M., El Rhilassi, A., El Boujaady, H., Bennani-Ziatni, M., & Taitai, A.
- Venue
- Arabian Journal of Chemistry
- Publisher
- Scientific Scholar
- Published
- 2017-05
- Volume
- 10
- Pages
- S3292-S3302
- ISSN
- 1878-5352 (ISSN-L)
- OpenAlex
- W2007760010
- Cited by
- 311
- References
- 24
- FWCI
- 5.20
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.