The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A 3D concrete printing prefabrication platform for bespoke columns
Open accessAbstract
Recent developments in computational design and digital fabrication with concrete enable the realization of freeform geometries that optimize material use. 3D Concrete extrusion Printing (3DCP) is presently one of the most utilized digital fabrication methods with concrete. The expected advantages of 3DCP result from shaping concrete without formwork and from placing material only where functionally required. Although these advantages were pointed out more than 20 years ago, it is difficult to find competitive examples and their usage in real buildings. Consequently, the nonspecific character of the process acts as a shortcoming by opening up extensive possibilities without a clear direction. This paper proposes an automated 3DCP prefabrication platform for customized columns. The process-specific parameters are, therefore, fine-tuned for high-quality products with diverse forms and textures. Additionally, this paper proposes an evaluation method for geometric complexity and identifies the types of column typologies that may benefit from a 3DCP prefabrication platform.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Cited by
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Technology readiness: A global snapshot of 3D concrete printing and the frontiers for development
Ma, G., Buswell, R., Leal da Silva, W. R., Wang, L., Xu, J., & Jones, S. Z. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106774 · Cited by 280
A Circular Built Environment in the Digital Age
(2024) · Circular Economy and Sustainability · doi:10.1007/978-3-031-39675-5 · Cited by 59
Additive Manufacturing of Large Coreless Filament Wound Composite Elements for Building Construction
Bodea, S., Mindermann, P., Gresser, G. T., & Menges, A. (2022) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2020.0346 · Cited by 32
Metadata
- Authors
- Anton, A., Reiter, L., Wangler, T., Frangez, V., Flatt, R. J., & Dillenburger, B.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 122
- Pages
- 103467
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W3112884474
- Cited by
- 246
- References
- 1
- FWCI
- 14.06
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A 3D concrete printing prefabrication platform for bespoke columns. https://app.cochat.ai/papers/10.1016/j.autcon.2020.103467
- The paper
- Anton, A., Reiter, L., Wangler, T., Frangez, V., Flatt, R. J., & Dillenburger, B. (2021). A 3D concrete printing prefabrication platform for bespoke columns. Automation in Construction. https://doi.org/10.1016/j.autcon.2020.103467
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.