The DOI matches its Crossref record.
Effect of pyrolysis temperature on the composition of the oils obtained from sewage sludge
Open accessAbstract
Abstract Sewage sludge was pyrolysed in a quartz reactor at 350, 450, 550 and 950 °C. The pyrolysis oils from the sewage sludge were characterized in detail by means of gas chromatography–mass spectrometry (GC–MS). Changes in the composition of the oils related to the process conditions were assessed by normalizing the areas of the peaks. It was demonstrated that, as the temperature of pyrolysis increased from 350 to 950 °C, the concentration of mono-aromatic hydrocarbons in the oils also increased. Conversely, phenol and its alkyl derivatives showed a strong decrease in their concentration as temperature rose. Polycyclic aromatic hydrocarbons (PAHs) with two to three rings passed through a maximum at a pyrolysis temperature of 450 °C. PAHs with 4–5 rings also presented a major increase as temperature increased up to 450 °C, the concentration at 950 °C being slightly higher than that at 450 °C. Quantification of the main compounds showed that sewage sludge pyrolysis oils contain significant quantities of potentially high-value hydrocarbons such as mono-aromatic hydrocarbons and phenolic compounds. The oils also contain substantial concentrations of PAHs, even at the lowest temperature of 350 °C. The pathway to PAH formation is believed to be via the Diels–Alder reaction and also via secondary reactions of oxygenated compounds such as phenols.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review
Tripathi, M., Sahu, J. N., & Ganesan, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.122 · Cited by 1,759
Towards sewage sludge based biofuels via thermochemical conversion – A review
Manara, P., & Zabaniotou, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.074 · Cited by 598
Sewage sludge pyrolysis for liquid production: A review
Fonts, I., Gea, G., Azuara, M., Ábrego, J., & Arauzo, J. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.02.070 · Cited by 592
Méndez, A., Gómez, A., Paz-Ferreiro, J., & Gascó, G. (2012) · Chemosphere · doi:10.1016/j.chemosphere.2012.05.092 · Cited by 493
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 399
Metadata
- Authors
- Sánchez, M. E., Menéndez, J. A., Domínguez, A., Pis, J. J., Martínez, O., Calvo, L. F., & Bernad, P. L.
- Venue
- Biomass and Bioenergy
- Publisher
- Elsevier BV
- Published
- 2009-06
- Volume
- 33
- Issue
- 6-7
- Pages
- 933-940
- ISSN
- 0961-9534 (ISSN-L)
- OpenAlex
- W1989701803
- Cited by
- 210
- References
- 0
- FWCI
- 4.08
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of pyrolysis temperature on the composition of the oils obtained from sewage sludge. https://app.cochat.ai/papers/10.1016/j.biombioe.2009.02.002
- The paper
- Sánchez, M. E., Menéndez, J. A., Domínguez, A., Pis, J. J., Martínez, O., Calvo, L. F., & Bernad, P. L. (2009). Effect of pyrolysis temperature on the composition of the oils obtained from sewage sludge. Biomass and Bioenergy. https://doi.org/10.1016/j.biombioe.2009.02.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.