The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
A study of bonding and failure mechanisms in fuel pellets from different biomass resources
Abstract
Pelletization of biomass reduces its handling costs, and results in a fuel with a greater structural homogeneity. The aim of the present work was to study the strength and integrity of pellets and relate them to the quality and mechanisms of inter-particular adhesion bonding. The raw materials used were: beech, spruce and straw, representing the most common biomass types used for fuel pellet production, i.e. hardwoods, softwoods and grasses, respectively. The results showed that the compression strengths of the pellets were in general higher for pellets produced at higher temperatures, and much higher for wood pellets than for straw pellets. Scanning electron microscopy of the beech pellets fracture surfaces, pressed at higher temperatures, showed areas of cohesive failure, indicating high energy failure mechanisms, likely due to lignin flow and inter-diffusion between adjacent wood particles. These were absent in both spruce and straw pellets. Infrared spectroscopy of the fracture surfaces of the straw pellets indicated high concentrations of hydrophobic extractives, that were most likely responsible for their low compression strength, due to presence of a chemical weak boundary layer, limiting the adhesion mechanism to van der Waals forces. Electron micrographs indicating interfacial failure mechanisms support these findings. Infrared spectra of the fracture surface of wood pellets, pressed at elevated temperatures, showed no signs of hydrophobic extractives. It has been shown that both temperature and chemical composition, i.e. the presence of hydrophobic extractives, have a significant influence on the bonding quality between biomass particles during the pelletizing process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Determination of Structural Carbohydrates and Lignin in Biomass
Sluiter, A. D., Hames, B. R., Ruiz, R. O., Scarlata, C. J., Sluiter, J. B., Templeton, D. W., & Crocker, D. P. (2012) · Cited by 5,261
Wood: Chemistry, ultrastructure, reactions
(1983) · doi:10.1515/9783110839654 · Cited by 2,846
Nimz, H. H. (1984) · Holz als Roh- und Werkstoff · doi:10.1007/bf02608943 · Cited by 2,761
Wood handbook: wood as an engineering material
Ross, R. J., & USDA Forest Service., F. P. L. (2010) · doi:10.2737/fpl-gtr-190 · Cited by 2,510
Wood Chemistry: Fundamentals and Applications
Sjöström, E. (1981) · Cited by 1,898
Classification of Lignins from Different Botanical Origins by FT-IR Spectroscopy
Faix, O. (1991) · Holzforschung · doi:10.1515/hfsg.1991.45.s1.21 · Cited by 1,276
Factors affecting strength and durability of densified biomass products
Kaliyan, N., & Vance Morey, R. (2009) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2008.08.005 · Cited by 1,255
Wood handbook : wood as an engineering material.
Laboratory, F. P. (1999) · doi:10.2737/fpl-gtr-113 · Cited by 987
Kaliyan, N., & Morey, R. V. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.08.064 · Cited by 483
Cell wall structural changes in wheat straw pretreated for bioethanol production
Kristensen, J. B., Thygesen, L. G., Felby, C., Jorgensen, H., & Elder, T. (2008) · Biotechnology for Biofuels · doi:10.1186/1754-6834-1-5 · Cited by 482
Cited by
Sharma, H. B., Sarmah, A. K., & Dubey, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109761 · Cited by 501
Lohri, C. R., Diener, S., Zabaleta, I., Mertenat, A., & Zurbrügg, C. (2017) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-017-9422-5 · Cited by 311
Recent developments in biomass pelletization – A review
Stelte, W., Sanadi, A. R., Shang, L., Holm, J. K., Ahrenfeldt, J., & Henriksen, U. B. (2012) · BioResources · doi:10.15376/biores.7.3.4451-4490 · Cited by 295
Self-citationLiu, Z., Quek, A., & Balasubramanian, R. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.08.087 · Cited by 287
Stelte, W., Holm, J. K., Sanadi, A. R., Barsberg, S., Ahrenfeldt, J., & Henriksen, U. B. (2011) · Fuel · doi:10.1016/j.fuel.2011.05.011 · Cited by 265
Self-citation
Metadata
- Authors
- Stelte, W., Holm, J. K., Sanadi, A. R., Barsberg, S., Ahrenfeldt, J., & Henriksen, U. B.
- Venue
- Biomass and Bioenergy
- Publisher
- Elsevier BV
- Published
- 2011-02
- Volume
- 35
- Issue
- 2
- Pages
- 910-918
- ISSN
- 0961-9534 (ISSN-L)
- OpenAlex
- W1989785764
- Cited by
- 378
- References
- 31
- FWCI
- 6.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A study of bonding and failure mechanisms in fuel pellets from different biomass resources. https://app.cochat.ai/papers/10.1016/j.biombioe.2010.11.003
- The paper
- Stelte, W., Holm, J. K., Sanadi, A. R., Barsberg, S., Ahrenfeldt, J., & Henriksen, U. B. (2011). A study of bonding and failure mechanisms in fuel pellets from different biomass resources. Biomass and Bioenergy. https://doi.org/10.1016/j.biombioe.2010.11.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.