Olive bagasse (Olea europea L.) pyrolysis
Abstract
Olive bagasse (Olea europea L.) was pyrolysed in a fixed-bed reactor. The effects of pyrolysis temperature, heating rate, particle size and sweep gas flow rates on the yields of the products were investigated. Pyrolysis runs were performed using pyrolysis temperatures between 350 and 550 degrees C with heating rates of 10 and 50 degrees C min(-1). The particle size and sweep gas flow rate varied in the ranges 0.224-1.8mm and 50-200 cm3 min(-1), respectively. The bio-oil obtained at 500 degrees C was analysed and at this temperature the liquid product yield was the maximum. The various characteristics of bio-oil obtained under these conditions were identified on the basis of standard test methods. The empirical formula of the bio-oil with heating value of 31.8 MJ kg(-1) was established as CH(1.65)O(0.25)N(0.03). The chemical characterization showed that the bio-oil obtained from olive bagasse may be potentially valuable as a fuel and chemical feedstock.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The increase in gas yield is due to secondary cracking of pyrolysis vapors at higher temperatures.
“The increase in gas yield is due to secondary cracking of the pyrolysis vapors at higher temperatures [13].”
From Pyrolysis of Dried Black Liquor Solids and Characterization of the Bio-Char and Bio-Oil (2018) · cites this paper as [13]
The citation lists haven’t been fetched yet
References 40 · Cited by 192
- Authors
- Şensöz, S., Demiral, İ., & Ferdi Gerçel, H.
- Affiliations
- Eskişehir Osmangazi University (TR)
- Corresponding author
- Şensöz, Sevgi
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2006-02
- Volume
- 97
- Issue
- 3
- Pages
- 429-436
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2023669141
- Cited by
- 192
- References
- 40
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 5 · 2023: 10 · 2022: 6 · 2021: 14 · 2020: 9 · 2019: 11 · 2018: 10 · 2017: 7 · 2016: 13 · 2015: 9 · 2014: 9 · 2013: 11 · 2012: 15
- FWCI
- 5.44
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Bioresource Technology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Biomedical Engineering › Biodiesel Production and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
- Keywords
- pyrolysis, bio-oil, fixed-bed reactor, pyrolysis temperature, heating rate, particle size, sweep gas flow rate, bio-oil composition, calorific value, biomass fuel, chemical feedstocks
- MeSH terms
- Cellulose, Chromatography, Gas, Hot Temperature, Hydrocarbons, Particle Size, Plant Oils, Temperature, Biomass, Bioreactors, Nuclear Magnetic Resonance, Biomolecular, Olea
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review