Techno-economic analysis of decentralized biomass processing depots
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Decentralized biomass processing facilities, known as biomass depots, may be necessary to achieve feedstock cost, quantity, and quality required to grow the future U.S. bioeconomy. In this paper, we assess three distinct depot configurations for technical difference and economic performance. The depot designs were chosen to compare and contrast a suite of capabilities that a depot could perform ranging from conventional pelleting to sophisticated pretreatment technologies. Our economic analyses indicate that depot processing costs are likely to range from ∼US$30 to US$63 per dry metric tonne (Mg), depending upon the specific technology implemented and the energy consumption for processing equipment such as grinders and dryers. We conclude that the benefits of integrating depots into the overall biomass feedstock supply chain will outweigh depot processing costs and that incorporation of this technology should be aggressively pursued.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Idaho National Laboratory (INL), I. F., Kenney, K., USDOE Office of Energy Efficiency and Renewable Energy (EERE), Cafferty, K., Jacobson, J., Bonner, I., Gresham, G., Smith, W., Thompson, D., Thompson, V., et al. (2013) · doi:10.2172/1130548 · Cited by 42
Self-citation
Cited by
Lynam, J. G., Kumar, N., & Wong, M. J. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.04.079 · Cited by 374
Impact of feedstock quality and variation on biochemical and thermochemical conversion
Li, C., Aston, J. E., Lacey, J. A., Thompson, V. S., & Thompson, D. N. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.063 · Cited by 155
Forsberg, C. W., Dale, B. E., Jones, D. S., Hossain, T., Morais, A. R. C., & Wendt, L. M. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117225 · Cited by 60
Schipfer, F., Pfeiffer, A., & Hoefnagels, R. (2022) · Energies · doi:10.3390/en15020433 · Cited by 17
Metadata
- Authors
- Lamers, P., Roni, M. S., Tumuluru, J. S., Jacobson, J. J., Cafferty, K. G., Hansen, J. K., Kenney, K., Teymouri, F., & Bals, B.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2015-10
- Volume
- 194
- Pages
- 205-213
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2184078581
- Cited by
- 193
- References
- 1
- FWCI
- 15.61
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.