A review of catalysts used in microwave assisted pyrolysis and gasification
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The review describes different catalysts and reactor-types used in microwave-assisted thermochemical biomass conversion. We present comparative review of various catalytic experiments and experimental conditions using catalysts in both in situ and ex situ processes. In situ catalytic processes are more frequently used due to simpler experimental set up. However, the process leads to higher catalytic deactivation rate and catalyst recovery is difficult. Catalysts used in ex situ processes require a more complex experimental set-up, the advantage being the fact that optimum temperature can be obtained to achieve best results catalyst recovery is facile, and its deactivation occurs at a lower rate. The catalysts described herein represent just a small part of the catalyst types/family that can be theoretically used. Commonly used catalysts are zeolites, metal oxides, various salts or carbon type materials but other materials or improvements of those mentioned need to be tested in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Production of first and second generation biofuels: A comprehensive review
Naik, S. N., Goud, V. V., Rout, P. K., & Dalai, A. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.003 · Cited by 3,264
Bio-oil from fast pyrolysis of lignin: Effects of process and upgrading parameters
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Cheng, Y., Addy, M., Lu, Q., Omar, M. M., Liu, Y., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.129 · Cited by 265
Fan, L., Chen, P., Zhang, Y., Liu, S., Liu, Y., Wang, Y., Dai, L., & Ruan, R. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.11.072 · Cited by 218
Cited by
Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698
A review on the pyrolysis of algal biomass for biochar and bio-oil – Bottlenecks and scope
Sekar, M., Mathimani, T., Alagumalai, A., Chi, N. T. L., Duc, P. A., Bhatia, S. K., Brindhadevi, K., & Pugazhendhi, A. (2021) · Fuel · doi:10.1016/j.fuel.2020.119190 · Cited by 293
Microwaves and Heterogeneous Catalysis: A Review on Selected Catalytic Processes
Palma, V., Barba, D., Cortese, M., Martino, M., Renda, S., & Meloni, E. (2020) · Catalysts · doi:10.3390/catal10020246 · Cited by 280
Challenges and opportunities in microwave-assisted catalytic pyrolysis of biomass: A review
Ren, X., Shanb Ghazani, M., Zhu, H., Ao, W., Zhang, H., Moreside, E., Zhu, J., Yang, P., Zhong, N., & Bi, X. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118970 · Cited by 272
Catalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review
Wang, Y., Akbarzadeh, A., Chong, L., Du, J., Tahir, N., & Awasthi, M. K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134181 · Cited by 247
Metadata
- Authors
- State, R. N., Volceanov, A., Muley, P., & Boldor, D.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 277
- Pages
- 179-194
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W2909276964
- Cited by
- 121
- References
- 4
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.