Effects of temperature, oxygen and steam on pore structure characteristics of coconut husk activated carbon powders prepared by one-step rapid pyrolysis activation process
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Activated carbon powders made from coconut husk (CHCs) were prepared by one-step rapid pyrolysis activation process. Effects of temperature, oxygen and steam on the pore structure of CHCs were investigated. Results showed that high temperature, oxygen and steam all motivated the development of the CHCs pore structure. High temperature accelerated the evaporation of volatiles and led to more micropore structures. Oxygen promoted the development of both micropores and mesopores. CHCs' porosity separately presented a linear and a logarithmic growth with the increase of the preparation temperature and oxygen content. CHCs prepared under 1000 ℃ with activation agents of 6% oxygen and 20% steam exhibited the largest specific surface area and total pore volume of 415.85 m2/g and 0.1748 cm3/g. Steam can diffuse into the CHC matrix and enhance the formation of more mesopores. Steam over 20% would over-burn the substance and lead to the collapse of some pore structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of CO2 from flue gas by novel seaweed-based KOH-activated porous biochars
Ding, S., & Liu, Y. (2020) · Fuel · doi:10.1016/j.fuel.2019.116382 · Cited by 311
Cao, F., Lian, C., Yu, J., Yang, H., & Lin, S. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.007 · Cited by 119
Cited by
Li, Y., Xing, B., Ding, Y., Han, X., & Wang, S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123614 · Cited by 576
Seow, Y. X., Tan, Y. H., Mubarak, N. M., Kansedo, J., Khalid, M., Ibrahim, M. L., & Ghasemi, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.107017 · Cited by 338
Biomass-based carbon materials for CO2 capture: A review
Quan, C., Zhou, Y., Wang, J., Wu, C., & Gao, N. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102373 · Cited by 200
Agricultural waste to real worth biochar as a sustainable material for supercapacitor
Khedulkar, A. P., Pandit, B., Dang, V. D., & Doong, R.-A. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.161441 · Cited by 193
Kundu, S., Khandaker, T., Anik, M. A.-A. M., Hasan, M. K., Dhar, P. K., Dutta, S. K., Latif, M. A., & Hossain, M. S. (2024) · RSC Advances · doi:10.1039/d4ra04537h · Cited by 181
Metadata
- Authors
- Fu, J., Zhang, J., Jin, C., Wang, Z., Wang, T., Cheng, X., & Ma, C.
- Venue
- Bioresource Technology
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 310
- Pages
- 123413
- ISSN
- 0960-8524 (ISSN-L)
- OpenAlex
- W3016924680
- Cited by
- 111
- References
- 2
- FWCI
- 4.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.