The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Review of adaptive thermal comfort models in built environmental regulatory documents
Open accessAbstract
In recent years, adaptive thermal comfort models have been integrated into several building design and operations regulatory documents. Although the theoretical background of the adaptive thermal comfort models is quite mature, still some ambiguities exist for their application. The objective of this study is to identify the main sources of uncertainty around application of adaptive models and to analyze quantitatively the difference between the adaptive comfort models proposed by the regulatory documents when applied across a spectrum of different climate zones. This paper analyzes the adaptive models in ASHRAE Standard 55, the European EN 15251 (and its revision prEN 16798), the Dutch ISSO 74 and the Chinese GB/T 50785. For each regulatory document, the major variations or sources of uncertainty are investigated: for ASHRAE 55, the length of the calculation period of the prevailing mean of outdoor temperature, and for EN 15251, prEN 16798, and GB/T 50785, the exponential decay weighting factors used in the calculation of the running mean outdoor temperature. This study shows that, although these regulatory documents have promoted the uptake of adaptive comfort models by practitioners and designers, uncertainties surrounding their application obstruct full exploitation. In response, this paper offers a fine-tuning of some of the adaptive comfort models. However, the issue of adaptive models' applicability in hybrid ventilation or mixed-mode buildings is still to be resolved, as is a rational basis for identifying the operational mode of such buildings when the adaptive models can be applied, because of their intermittent compliance during transition seasons and also extreme weather events.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal Environmental Conditions for Human Occupancy
Ashrae, S. (1992) · Medical Entomology and Zoology · Cited by 6,092
Thermal comfort: Analysis and applications in environmental engineering
(1972) · Applied Ergonomics · doi:10.1016/s0003-6870(72)80074-7 · Cited by 4,451
Idris, M. H., Jafari, H., Harandi, S. E., Mirshahi, M., & Koleyni, S. J. (2012) · Advanced materials research · Cited by 2,357
(1998) · eScholarship (California Digital Library) · Cited by 1,934
Adaptive thermal comfort and sustainable thermal standards for buildings
Nicol, J. F., & Humphreys, M. A. (2002) · Energy and Buildings · doi:10.1016/s0378-7788(02)00006-3 · Cited by 1,850
Thermal adaptation in the built environment: a literature review
Brager, G. S., & de Dear, R. J. (1998) · Energy and Buildings · doi:10.1016/s0378-7788(97)00053-4 · Cited by 1,483
Self-citationThermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55
de Dear, R. J., & Brager, G. S. (2002) · Energy and Buildings · doi:10.1016/s0378-7788(02)00005-1 · Cited by 1,438
Self-citationA theoretical adaptive model of thermal comfort – Adaptive Predicted Mean Vote (aPMV)
Yao, R., Li, B., & Liu, J. (2009) · Building and Environment · doi:10.1016/j.buildenv.2009.02.014 · Cited by 709
Nicol, F., & Humphreys, M. (2009) · Building and Environment · doi:10.1016/j.buildenv.2008.12.013 · Cited by 551
Progress in thermal comfort research over the last twenty years
de Dear, R. J., Akimoto, T., Arens, E. A., Brager, G., Candido, C., Cheong, K. W. D., Li, B., Nishihara, N., Sekhar, S. C., Tanabe, S., et al. (2013) · Indoor Air · doi:10.1111/ina.12046 · Cited by 523
Self-citationThe adaptive model of thermal comfort and energy conservation in the built environment
de Dear, R., & Schiller Brager, G. (2001) · International Journal of Biometeorology · doi:10.1007/s004840100093 · Cited by 516
Self-citationUnderstanding the adaptive approach to thermal comfort
Humphreys, & Nicol, F. (1998) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 470
Introduction to thermal comfort standards and to the proposed new version of EN ISO 7730
Olesen, B. W., & Parsons, K. C. (2002) · Energy and Buildings · doi:10.1016/s0378-7788(02)00004-x · Cited by 465
Developing an adaptive control algorithm for Europe
McCartney, K. J., & Fergus Nicol, J. (2002) · Energy and Buildings · doi:10.1016/s0378-7788(02)00013-0 · Cited by 458
(1910) · Nature · doi:10.1038/083457a0 · Cited by 436
Thermal comfort as part of a self-regulating system
Nicol, J. F., & Humphreys, M. A. (1973) · Building Research and Practice · doi:10.1080/09613217308550237 · Cited by 287
Climatic variations in comfortable temperatures: the Pakistan projects
Nicol, J. F., Raja, I. A., Allaudin, A., & Jamy, G. N. (1999) · Energy and Buildings · doi:10.1016/s0378-7788(99)00011-0 · Cited by 242
Energy consumption in buildings and female thermal demand
Kingma, B., & van Marken Lichtenbelt, W. (2015) · Nature Climate Change · doi:10.1038/nclimate2741 · Cited by 240
FIELD STUDIES OF THERMAL COMFORD COMPARED AND APPLIED.
Humphreys, M. (1976) · Cited by 223
Thermal comfort in naturally ventilated buildings in hot-humid area of China
Zhang, Y., Wang, J., Chen, H., Zhang, J., & Meng, Q. (2010) · Building and Environment · doi:10.1016/j.buildenv.2010.05.024 · Cited by 216
Yao, R., Liu, J., & Li, B. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.09.028 · Cited by 214
Field studies of thermal comfort compared and applied
(1976) · Applied Ergonomics · doi:10.1016/0003-6870(76)90104-6 · Cited by 212
Han, J., Zhang, G., Zhang, Q., Zhang, J., Liu, J., Tian, L., Zheng, C., Hao, J., Lin, J., Liu, Y., et al. (2006) · Building and Environment · doi:10.1016/j.buildenv.2006.06.028 · Cited by 200
Adaptive temperature limits: A new guideline in The Netherlands
van der Linden, A. C., Boerstra, A. C., Raue, A. K., Kurvers, S. R., & de Dear, R. J. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2005.02.008 · Cited by 169
Self-citationThermal comfort for naturally ventilated residential buildings in Harbin
Wang, Z., Zhang, L., Zhao, J., & He, Y. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.08.010 · Cited by 140
An introduction to the Chinese Evaluation Standard for the indoor thermal environment
Li, B., Yao, R., Wang, Q., & Pan, Y. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.06.032 · Cited by 136
Field study of a thermal environment and adaptive model in Shanghai
Ye, X., Zhou, Z., Lian, Z., Liu, H., Li, C. Z., & Liu, Y. M. (2006) · Indoor Air · doi:10.1111/j.1600-0668.2006.00434.x · Cited by 123
Occupants’ behavioural adaptation in workplaces with non-central heating and cooling systems
Liu, J., Yao, R., Juan, W., & Li, B. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.09.037 · Cited by 107
Milankovitch, M. (1930) · Cited by 105
Adaptive comfort: Analysis and application of the main indices
Ferrari, S., & Zanotto, V. (2011) · Building and Environment · doi:10.1016/j.buildenv.2011.08.022 · Cited by 71
Sourbron, M., & Helsen, L. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.10.005 · Cited by 64
A new hybrid thermal comfort guideline for the Netherlands: background and development
Boerstra, A., van Hoof, J., & van Weele, A. M. (2014) · Architectural Science Review · doi:10.1080/00038628.2014.971702 · Cited by 52
Yang, D., Xiong, J., & Liu, W. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.12.038 · Cited by 47
Carlucci, S., Pagliano, L., & Sangalli, A. (2014) · Building and Environment · doi:10.1016/j.buildenv.2013.12.017 · Cited by 41
Self-citationIndoor climate guidelines in The Netherlands
van der Linden, K., Kurvers, S. R., Raue, A. K., & Boerstra, A. (2007) · Construction Innovation · doi:10.1108/14714170710721304 · Cited by 5
Cited by
Sustainability in the construction industry: A systematic review of the literature
Lima, L., Trindade, E., Alencar, L., Alencar, M., & Silva, L. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125730 · Cited by 406
Deep learning to replace, improve, or aid CFD analysis in built environment applications: A review
Calzolari, G., & Liu, W. (2021) · Building and Environment · doi:10.1016/j.buildenv.2021.108315 · Cited by 279
Ahmed, T., Kumar, P., & Mottet, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110669 · Cited by 270
A review of adaptive thermal comfort research since 1998
de Dear, R., Xiong, J., Kim, J., & Cao, B. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.109893 · Cited by 258
Self-citationComparative bioclimatic approach for comfort and passive heating and cooling strategies in Algeria
Semahi, S., Zemmouri, N., Singh, M. K., & Attia, S. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106271 · Cited by 57
Metadata
- Authors
- Carlucci, S., Bai, L., de Dear, R., & Yang, L.
- Venue
- Building and Environment
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 137
- Pages
- 73-89
- ISSN
- 0360-1323 (ISSN-L)
- OpenAlex
- W2795114416
- Cited by
- 275
- References
- 36
- FWCI
- 24.26
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.