The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
CFD evaluation of building geometry modifications to reduce pedestrian-level wind speed
Open accessAbstract
High-rise buildings can significantly increase the wind speed at pedestrian level, and knowledge of building aerodynamics and pedestrian-level wind (PLW) conditions is therefore imperative in their design. This study aims at evaluating different building geometry modifications to reduce PLW speed around an isolated high-rise building. Numerical simulations with computational fluid dynamics (CFD) are performed to evaluate the effect of canopies, podiums and permeable floors. To the best knowledge of the authors, a systematic study on the impact of these modifications on PLW conditions using validated CFD simulations has not been reported before. Grid-sensitivity analyses are performed and sub-configuration validation is applied using wind-tunnel measurements from the literature. It is shown that a canopy or a podium can significantly reduce the area-averaged PLW speed (up to 29%) and maximum PLW speed (up to 36%) around the high-rise building. In general, the PLW speeds decrease with increasing canopy or podium size. The introduction of a permeable floor to the building can reduce the maximum and area-averaged mean wind speed. However, when low-floor building layers are removed, adverse effects are noted, i.e. the average PLW speed increases (up to 21%) and the lower-speed wake region behind the building is reduced in size.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new k-ε eddy viscosity model for high Reynolds number turbulent flows
Shih, T.-H., Liou, W. W., Shabbir, A., Yang, Z., & Zhu, J. (1995) · Computers & Fluids · doi:10.1016/0045-7930(94)00032-t · Cited by 6,119
Development of turbulence models for shear flows by a double expansion technique
Yakhot, V., Orszag, S. A., Thangam, S., Gatski, T. B., & Speziale, C. G. (1992) · Physics of Fluids A: Fluid Dynamics · doi:10.1063/1.858424 · Cited by 2,832
Cited by
Deep learning to replace, improve, or aid CFD analysis in built environment applications: A review
Calzolari, G., & Liu, W. (2021) · Building and Environment · doi:10.1016/j.buildenv.2021.108315 · Cited by 279
Metadata
- Authors
- van Druenen, T., van Hooff, T., Montazeri, H., & Blocken, B.
- Venue
- Building and Environment
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 163
- Pages
- 106293
- ISSN
- 0360-1323 (ISSN-L)
- OpenAlex
- W2962813311
- Cited by
- 174
- References
- 2
- FWCI
- 6.63
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.