The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
ResIPy, an intuitive open source software for complex geoelectrical inversion/modeling
Open accessAbstract
Abstract Electrical resistivity tomography (ERT) and induced polarization (IP) methods are now widely used in many interdisciplinary projects. Although field surveys using these methods are relatively straightforward, ERT and IP data require the application of inverse methods prior to any interpretation. Several established non-commercial inversion codes exist, but they typically require advanced knowledge to use effectively. ResIPy was developed to provide a more intuitive, user-friendly, approach to inversion of geoelectrical data, using an open source graphical user interface (GUI) and a Python application programming interface (API). ResIPy utilizes the mature R2/cR2 inversion codes for ERT and IP, respectively. The ResIPy GUI facilitates data importing, data filtering, error modeling, mesh generation, data inversion and plotting of inverse models. Furthermore, the easy to use design of ResIPy and the help provided inside makes it an effective educational tool. This paper highlights the rationale and structure behind the interface, before demonstrating its capabilities in a range of environmental problems. Specifically, we demonstrate the ease at which ResIPy deals with topography, advanced data processing, the ability to fix and constrain regions of known geoelectrical properties, time-lapse analysis and the capability for forward modeling and survey design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matplotlib: a 2D graphics environment
Hunter, J. D. (2007) · Computing in Science & Engineering · doi:10.1109/mcse.2007.55 · Cited by 39,249
Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilities
Geuzaine, C., & Remacle, J. (2009) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.2579 · Cited by 7,814
pyGIMLi: An open-source library for modelling and inversion in geophysics
Rücker, C., Günther, T., & Wagner, F. M. (2017) · Computers & Geosciences · doi:10.1016/j.cageo.2017.07.011 · Cited by 512
Cockett, R., Kang, S., Heagy, L. J., Pidlisecky, A., & Oldenburg, D. W. (2015) · Computers & Geosciences · doi:10.1016/j.cageo.2015.09.015 · Cited by 431
Tools and Techniques: Electrical Methods
Binley, A. (2015) · Treatise on Geophysics · doi:10.1016/b978-0-444-53802-4.00192-5 · Cited by 159
Self-citationGeophysical characterisation of the groundwater–surface water interface
McLachlan, P. J., Chambers, J. E., Uhlemann, S., & Binley, A. M. (2017) · Advances in Water Resources · doi:10.1016/j.advwatres.2017.09.016 · Cited by 132
Self-citationElectrical resistivity imaging of the architecture of substream sediments
Crook, N., Binley, A. M., Knight, R. J., Robinson, D. A., Zarnetske, J. P., & Haggerty, R. D. (2008) · Water Resources Research · doi:10.1029/2008wr006968 · Cited by 117
Self-citationSaneiyan, S., Ntarlagiannis, D., Ohan, J., Lee, J., Colwell, F. S., & Burns, S. E. (2018) · Ecological Engineering · doi:10.1016/j.ecoleng.2018.11.010 · Cited by 105
Self-citationTime‐lapse spectral induced polarization imaging of stimulated uranium bioremediation
Orozco, A. F., Williams, K. H., & Kemna, A. (2013) · Near Surface Geophysics · doi:10.3997/1873-0604.2013020 · Cited by 89
Geophysical methods for monitoring soil stabilization processes
Saneiyan, S., Ntarlagiannis, D., Werkema, D. D., & Ustra, A. T. (2017) · Journal of Applied Geophysics · doi:10.1016/j.jappgeo.2017.12.008 · Cited by 52
Self-citation
Metadata
- Authors
- Blanchy, G., Saneiyan, S., Boyd, J., McLachlan, P., & Binley, A.
- Venue
- Computers & Geosciences
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 137
- Pages
- 104423
- ISSN
- 0098-3004 (ISSN-L)
- OpenAlex
- W3004437996
- Cited by
- 294
- References
- 10
- FWCI
- 18.74
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: ResIPy, an intuitive open source software for complex geoelectrical inversion/modeling. https://app.cochat.ai/papers/10.1016/j.cageo.2020.104423
- The paper
- Blanchy, G., Saneiyan, S., Boyd, J., McLachlan, P., & Binley, A. (2020). ResIPy, an intuitive open source software for complex geoelectrical inversion/modeling. Computers & Geosciences. https://doi.org/10.1016/j.cageo.2020.104423
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.