The DOI matches its Crossref record.
Tailoring biomass-based activated carbon for CH4 storage by combining chemical activation with H3PO4 or ZnCl2 and physical activation with CO2
Open accessAbstract
Abstract Coconut shell-based activated carbons intended for CH 4 storage were prepared by chemical activation with H 3 PO 4 or ZnCl 2 and/or physical activation with CO 2 . Efforts were focused to establish relationships among the activation procedure, the textural and physical-chemical properties of the resulting materials and their volumetric CH 4 uptake. The best results were achieved by using the combination of a relatively soft chemical activation with H 3 PO 4 or ZnCl 2 , just the sufficient to minimize the presence of macropores originated from the botanical structure of the precursor, followed by physical activation with CO 2 to develop a narrow pore size distribution mainly located around the optimum pore diameter/width for CH 4 storage. This combined methodology permitted to obtain excess volumetric CH 4 adsorption capacities as high as 94, 148 and 145 V/V for granular, powdered/compressed and monolithic carbons, respectively. The corresponding total CH 4 storing capacities were estimated to be 102, 165 and 163 V/V. It is worthy to highlight that the precursor was a low cost and abundant agricultural by-product, which is very important for large-scale applications such as gas transportation and gas storage in vehicular fuel tanks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Methods for preparation and activation of activated carbon: a review
Heidarinejad, Z., Dehghani, M. H., Heidari, M., Javedan, G., Ali, I., & Sillanpää, M. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00955-0 · Cited by 1,475
Removal of emerging contaminants from the environment by adsorption
Sophia A., C., & Lima, E. C. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.12.026 · Cited by 913
Biomass derived porous carbon for CO2 capture
Singh, G., Lakhi, K. S., Sil, S., Bhosale, S. V., Kim, I., Albahily, K., & Vinu, A. (2019) · Carbon · doi:10.1016/j.carbon.2019.03.050 · Cited by 555
Recent advances in activated carbon modification techniques for enhanced heavy metal adsorption
Mariana, M., H.P.S., A. K., Mistar, E. M., Yahya, E. B., Alfatah, T., Danish, M., & Amayreh, M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.102221 · Cited by 410
Jiang, G., Senthil, R. A., Sun, Y., Kumar, T. R., & Pan, J. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230886 · Cited by 371
Fu, Y., Shen, Y., Zhang, Z., Ge, X., & Chen, M. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.07.423 · Cited by 369
Biomass‐Derived Carbon Materials: Controllable Preparation and Versatile Applications
Wang, Y., Zhang, M., Shen, X., Wang, H., Wang, H., Xia, K., Yin, Z., & Zhang, Y. (2021) · Small · doi:10.1002/smll.202008079 · Cited by 324
Activated carbons from biomass-based sources for CO2 capture applications
Abuelnoor, N., AlHajaj, A., Khaleel, M., Vega, L. F., & Abu-Zahra, M. R. M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131111 · Cited by 310
Biomass‐Derived Carbon for High‐Performance Batteries: From Structure to Properties
Sun, Y., Shi, X., Yang, Y., Suo, G., Zhang, L., Lu, S., & Chen, Z. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201584 · Cited by 253
Perspectives of Engineered Biochar for Environmental Applications: A Review
Haghighi Mood, S., Pelaez-Samaniego, M. R., & Garcia-Perez, M. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01201 · Cited by 104
Metadata
- Authors
- Prauchner, M. J., Sapag, K., & Rodríguez-Reinoso, F.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2016-12
- Volume
- 110
- Pages
- 138-147
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2508062271
- Cited by
- 186
- References
- 0
- FWCI
- 8.56
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.