The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Towards high-performance additive of Ti3C2/graphene hybrid with a novel wrapping structure in epoxy coating
Abstract
Abstract In spite of graphene and Ti3C2 MXene sheets with various significant properties and function, the performance characteristics of their hybrid in organic coating have been rarely discussed. Herein, the Ti3C2/graphene hybrid (M-G) with wrapping structure was successfully prepared and as filler was added into epoxy coating (MG-EP). Their tribological performance against Al2O3 and Si3N4 balls under dry sliding and 3.5 wt % NaCl solution was evaluated in detail and the anti-wear mechanism was studied via surface/interface analysis techniques. Results show that the wrapping structure of M-G hybrid can obviously decrease the wear rate of composite coating by 81–88%, with pure epoxy coating as a comparison. Moreover, the composite coating can retain good anticorrosion properties in corrosive medium during friction test, because its integrity still hinders the diffusion of corrosive media. The improving performance of composite coating mainly depends on: (a) the excellent lubrication and thermal conductivity of graphene and Ti3C2; (b) the synergistic effect of Ti3C2/graphene hybrid with wrapping structure; (c) the formation of protective film on the dual surface. The Ti3C2/graphene hybrid greatly enhances the tribological and anti-corrosive properties of organic coating, which provides a new thinking for the design and application of novel high-performance additive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Li, Z., Wang, L., Sun, D., Zhang, Y., Liu, B., Hu, Q., & Zhou, A. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.10.009 · Cited by 928
Cited by
2D MXenes: Tunable Mechanical and Tribological Properties
Wyatt, B. C., Rosenkranz, A., & Anasori, B. (2021) · Advanced Materials · doi:10.1002/adma.202007973 · Cited by 646
Perspectives of 2D MXene Tribology
Rosenkranz, A., Righi, M. C., Sumant, A. V., Anasori, B., & Mochalin, V. N. (2023) · Advanced Materials · doi:10.1002/adma.202207757 · Cited by 331
Mechanotribological Aspects of MXene‐Reinforced Nanocomposites
Malaki, M., & Varma, R. S. (2020) · Advanced Materials · doi:10.1002/adma.202003154 · Cited by 292
Metadata
- Authors
- Yan, H., Zhang, L., Li, H., Fan, X., & Zhu, M.
- Venue
- Carbon
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 157
- Pages
- 217-233
- ISSN
- 0008-6223 (ISSN-L)
- OpenAlex
- W2980607207
- Cited by
- 237
- References
- 3
- FWCI
- 14.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Towards high-performance additive of Ti3C2/graphene hybrid with a novel wrapping structure in epoxy coating. https://app.cochat.ai/papers/10.1016/j.carbon.2019.10.034
- The paper
- Yan, H., Zhang, L., Li, H., Fan, X., & Zhu, M. (2020). Towards high-performance additive of Ti3C2/graphene hybrid with a novel wrapping structure in epoxy coating. Carbon. https://doi.org/10.1016/j.carbon.2019.10.034
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.