The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Effect of lignocellulosic filler type and content on the behavior of polycaprolactone based eco-composites for packaging applications
Open accessAbstract
This study was based on the influence of lignocellulosic fillers and content on the morphology, crystallization behavior and thermal, mechanical and barrier properties of fully biodegradable eco-composites based on polycaprolactone for packaging applications. The biodegradation in soil as a function of time was also analyzed. Composites with 5 and 15wt% of cotton (CO); cellulose (CE) and hydrolyzed-cellulose (HCE) were prepared by melt-mixing. It was determined that, whereas lower content of CO and CE produced a decrease on the crystallinity of the matrix, HCE did not affect it. Increasing the filler content, the crystallinity degree of the matrix decreased at less extent, which was independent on the filler type. A clear reduction on the theoretical melting point, attributed to heterogeneous nucleation sites, took place for the lower content of CO and CE. Induction and half-crystallization times diminished when fillers were incorporated but the effect was less notorious at higher filler contents. All fillers enhanced the Young's modulus of the matrix but the optimal mechanical properties were not obtained with HCE, as was expected, but with CE. After analyzing the main parameters that affect the mechanical properties of the composite; such as morphology, hydrophilicity, crystallinity, mechanical properties and thermal stability of the fillers themselves, interface interaction, filler dispersion and thermal aspects of the composites, we concluded that the parameters responsible for such behavior were the larger aspect ratio, better dispersion and enhanced interface interaction of the CE filler. These parameters also affected the barrier properties and the process of biodegradation in soil of the composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Rosa, M. F., Medeiros, E. S., Malmonge, J. A., Gregorski, K. S., Wood, D. F., Mattoso, L. H. C., Glenn, G., Orts, W. J., & Imam, S. H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.01.059 · Cited by 1,099
Nanocomposites of Chitin Whiskers from Riftia Tubes and Poly(caprolactone)
Morin, A., & Dufresne, A. (2002) · Macromolecules · doi:10.1021/ma011493a · Cited by 287
Cited by
Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources
Ates, B., Koytepe, S., Ulu, A., Gurses, C., & Thakur, V. K. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00553 · Cited by 749
Piñeros-Hernandez, D., Medina-Jaramillo, C., López-Córdoba, A., & Goyanes, S. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2016.09.034 · Cited by 549
Natural Fiber Reinforced Composites
Fuqua, M. A., Huo, S., & Ulven, C. A. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.705409 · Cited by 488
Collazo-Bigliardi, S., Ortega-Toro, R., & Chiralt Boix, A. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.022 · Cited by 346
Recent trends and applications of cellulose nanocrystals in food industry
Mu, R., Hong, X., Ni, Y., Li, Y., Pang, J., Wang, Q., Xiao, J., & Zheng, Y. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.09.013 · Cited by 322
Metadata
- Authors
- Ludueña, L., Vázquez, A., & Alvarez, V.
- Venue
- Carbohydrate Polymers
- Publisher
- Elsevier BV
- Published
- 2012-01
- Volume
- 87
- Issue
- 1
- Pages
- 411-421
- ISSN
- 0144-8617 (ISSN-L)
- OpenAlex
- W2093718272
- Cited by
- 165
- References
- 5
- FWCI
- 2.22
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of lignocellulosic filler type and content on the behavior of polycaprolactone based eco-composites for packaging applications. https://app.cochat.ai/papers/10.1016/j.carbpol.2011.07.064
- The paper
- Ludueña, L., Vázquez, A., & Alvarez, V. (2012). Effect of lignocellulosic filler type and content on the behavior of polycaprolactone based eco-composites for packaging applications. Carbohydrate Polymers. https://doi.org/10.1016/j.carbpol.2011.07.064
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.