The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Adsorption of Co(II) and Ni(II) by EDTA- and/or DTPA-modified chitosan: Kinetic and equilibrium modeling
Abstract
Abstract The aim of the present study was to investigate the adsorption properties of surface modified chitosans in the aqueous solutions containing Co(II) and/or Ni(II) ions. For this purpose, the ligands of ethylenediaminetetraacetic acid (EDTA) or diethylenetriaminepentaacetic acid (DTPA) were immobilized onto polymer matrices of chitosan. Adsorption of Co(II) and Ni(II) by prepared adsorbents was investigated in batch techniques. The effects of pH, functional group, contact time, and the concentration of metals were studied. Metal uptake by EDTA-chitosan was 63.0 mg g −1 for Co(II) and 71.0 mg g −1 for Ni(II) and by DTPA-chitosan 49.1 mg g −1 for Co(II) and 53.1 mg g −1 for Ni(II). The adsorption efficiency of studied adsorbents ranged from 93.6% to 99.5% from 100 mg L −1 Co(II) and/or Ni(II) solution, when the adsorbent dose was 2 g L −1 and solution pH 2.1. The kinetics of Co(II) and Ni(II) on both of the modified chitosans followed the pseudo-second-order model but the adsorption rate was also influenced by intraparticle diffusion. The equilibrium data was best described by the Sips isotherm and its extended form was also well fitted to the two-component data obtained for systems containing different ratios of Co(II) and Ni(II). Nevertheless, the obtained modeling results indicated relatively homogenous system for Co(II) and heterogeneous system for Ni(II) adsorption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Low-cost adsorbents for heavy metals uptake from contaminated water: a review
Babel, S. (2003) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(02)00263-7 · Cited by 3,444
Physico–chemical treatment techniques for wastewater laden with heavy metals
Kurniawan, T. A., Chan, G. Y. S., Lo, W.-H., & Babel, S. (2006) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.01.015 · Cited by 2,072
Self-citation
Cited by
Zhao, F., Repo, E., Yin, D., Meng, Y., Jafari, S., & Sillanpää, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02227 · Cited by 508
Self-citationHydrothermal carbonization for energy-efficient processing of sewage sludge: A review
Wang, L., Chang, Y., & Li, A. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.04.011 · Cited by 499
Zhang, Y., Zhao, M., Cheng, Q., Wang, C., Li, H., Han, X., Fan, Z., Su, G., Pan, D., & Li, Z. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130927 · Cited by 325
Efficient removal of Pb(II), Cr(VI) and organic dyes by polydopamine modified chitosan aerogels
Guo, D.-M., An, Q.-D., Xiao, Z.-Y., Zhai, S.-R., & Yang, D.-J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.140 · Cited by 293
Zhao, F., Repo, E., Song, Y., Yin, D., Hammouda, S. B., Chen, L., Kalliola, S., Tang, J., Tam, K. C., & Sillanpää, M. (2017) · Green Chemistry · doi:10.1039/c7gc01770g · Cited by 267
Self-citation
Metadata
- Authors
- Repo, E., Warchol, J. K., Kurniawan, T. A., & Sillanpää, M. E. T.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2010-07
- Volume
- 161
- Issue
- 1-2
- Pages
- 73-82
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2086082816
- Cited by
- 450
- References
- 2
- FWCI
- 19.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption of Co(II) and Ni(II) by EDTA- and/or DTPA-modified chitosan: Kinetic and equilibrium modeling. https://app.cochat.ai/papers/10.1016/j.cej.2010.04.030
- The paper
- Repo, E., Warchol, J. K., Kurniawan, T. A., & Sillanpää, M. E. T. (2010). Adsorption of Co(II) and Ni(II) by EDTA- and/or DTPA-modified chitosan: Kinetic and equilibrium modeling. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2010.04.030
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
