Magnetic SiO2@CoFe2O4 nanoparticles decorated on graphene oxide as efficient adsorbents for the removal of anionic pollutants from water
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In this study, magnetic nanocomposites viz. SiO 2 @CoFe 2 O 4 nanoparticles decorated on graphene oxide were synthesized using solvothermal and sol-gel processes. The prepared nanocomposite materials were used as magnetic adsorbents for the removal of organic and inorganic pollutants (acid black 1 dye and Cr(VI) ions as model pollutants) from aqueous solution. The structure, morphology and other physico-chemical properties of nanocomposites were characterized by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), high resolution-transmission electron microscopy (HR-TEM), vibrating sample magnetometer (VSM), X-ray photo spectroscopy (XPS), zeta potential and Fourier transform infrared (FT-IR) spectroscopy. Batch mode adsorption studies were conducted with the prepared nanocomposites to determine the maximum adsorption capacity of acid black 1 dye and Cr(VI) ions as a function of contact time, pH, adsorbent dosage and initial adsorbate concentrations. Different kinetic and isotherm models were tested to describe and elucidate the adsorption mechanisms. Based on the experimental results obtained, the synthesized materials proved to exhibit considerable potential for the removal of acid black 1 and Cr(VI) ions from aqueous solution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Non-conventional low-cost adsorbents for dye removal: A review
CRINI, G. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.05.001 · Cited by 4,508
On the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650 · cited 1×
“The Sips model is a combination of Langmuir and Freundlich models that has three parameters [67].”
MethodAdsorptive Removal of Toxic Chromium from Waste-Water Using Wheat Straw and Eupatorium adenophorum
Song, D., Pan, K., Tariq, A., Azizullah, A., Sun, F., Li, Z., & Xiong, Q. (2016) · PLOS ONE · doi:10.1371/journal.pone.0167037 · Cited by 56 · cited 1×
“The concentration of Cr(VI) in the liquid phase was measured by 1,5-diphenylcarbohydrazide method using UV-Visible spectrophotometer in the maximum absorbance wavelength of 540 nm [21, 40, 41].”
Method
Cited by
Gusain, R., Gupta, K., Joshi, P., & Khatri, O. P. (2019) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2019.102009 · Cited by 825
Recent advances in carbon nanomaterial-based adsorbents for water purification
Gusain, R., Kumar, N., & Ray, S. S. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213111 · Cited by 566
A green biochar/iron oxide composite for methylene blue removal
Zhang, P., O’Connor, D., Wang, Y., Jiang, L., Xia, T., Wang, L., Tsang, D. C. W., Ok, Y. S., & Hou, D. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121286 · Cited by 503
Zheng, Y., Cheng, B., You, W., Yu, J., & Ho, W. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.02.013 · Cited by 465
A review on magnetic sensors for monitoring of hazardous pollutants in water resources
Hojjati-Najafabadi, A., Mansoorianfar, M., Liang, T., Shahin, K., & Karimi-Maleh, H. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.153844 · Cited by 367
Retracted
Metadata
- Authors
- Santhosh, C., Daneshvar, E., Kollu, P., Peräniemi, S., Grace, A. N., & Bhatnagar, A.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2017-08
- Volume
- 322
- Pages
- 472-487
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2602111921
- Cited by
- 124
- References
- 3
- FWCI
- 6.95
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.