The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Synthesis and adsorption performance of a modified micro-mesoporous MIL-101(Cr) for VOCs removal at ambient conditions
Open accessAbstract
In this study, dynamic adsorption behavior of different gaseous volatile organic compounds (VOCs) on a new modified M-MIL-101(Cr) was investigated with a great emphasis on gasoline adsorption. The M-MIL-101(Cr) was synthesized, along with comprehensive purification procedures, using a new linker to cluster molar ratio (2:1 instead of 1:1) and different modulators (i.e. HF and HNO3). All prepared adsorbents were characterized by XRD, FTIR, FE-SEM and N2 adsorption-desorption at 77 K. The results showed that surface area and pore volume of the M-MIL-101@Free (i.e. modified MIL-101(Cr) with using any modulator) which were 4293 m2/g and 2.43 cm3/g, greatly elevated up to 37.2% and 71.6% against the MIL-101@HNO3 (i.e. the best case of usual MIL-101(Cr)). The dynamic adsorption behavior of various VOCs (i.e. gasoline, n-pentane, n-hexane, n-heptane, benzene, toluene and xylenes), dispersed into an air stream at atmospheric conditions, was studied using an in-house made apparatus. The M-MIL-101@Free greatly exhibited high adsorption capacity for all selected VOCs which was approximately 1.9–2.5 times more than MIL-101@HNO3. Furthermore, the M-MIL-101@Free possessed maximum gasoline uptake of 90.14 wt%, which was enhanced by 116% (41.7 wt%) and 260% (25 wt%), compared to MIL-101@HNO3 and commercially activated carbon. Besides the prominent adsorption capacity of M-MIL-101@Free, it was also succeeded to be regenerated in 23.5% shorter time, 7.8% lower temperature and 2.1% higher efficiency versus the MIL-101@HNO3 after 4 cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of VOCs onto engineered carbon materials: A review
Zhang, X., Gao, B., Creamer, A. E., Cao, C., & Li, Y. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.05.013 · Cited by 1,479
Cited by
Abatement of various types of VOCs by adsorption/catalytic oxidation: A review
Yang, C., Miao, G., Pi, Y., Xia, Q., Wu, J., Li, Z., & Xiao, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.03.232 · Cited by 1,117
Li, X., Zhang, L., Yang, Z., Wang, P., Yan, Y., & Ran, J. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.116213 · Cited by 1,048
Zhu, L., Shen, D., & Luo, K. H. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122102 · Cited by 999
Zhang, X., Yang, Y., Lv, X., Wang, Y., Liu, N., Chen, D., & Cui, L. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.11.099 · Cited by 342
Zorainy, M. Y., Gar Alalm, M., Kaliaguine, S., & Boffito, D. C. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta06238g · Cited by 326
Metadata
- Authors
- Shafiei, M., Alivand, M. S., Rashidi, A., Samimi, A., & Mohebbi-Kalhori, D.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 341
- Pages
- 164-174
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2789276544
- Cited by
- 216
- References
- 1
- FWCI
- 7.37
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and adsorption performance of a modified micro-mesoporous MIL-101(Cr) for VOCs removal at ambient conditions. https://app.cochat.ai/papers/10.1016/j.cej.2018.02.027
- The paper
- Shafiei, M., Alivand, M. S., Rashidi, A., Samimi, A., & Mohebbi-Kalhori, D. (2018). Synthesis and adsorption performance of a modified micro-mesoporous MIL-101(Cr) for VOCs removal at ambient conditions. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2018.02.027
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.