The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
A new insight into corrosion inhibition mechanism of copper in aerated 3.5 wt.% NaCl solution by eco-friendly Imidazopyrimidine Dye: experimental and theoretical approach
Abstract
A large number of mechanism were anticipated for copper since 1988 in NaCl medium. The detail electrochemical behavior leading to the anodic dissolution of copper, however, still remains uncertain. Herein, an Imidazopyrimidine Dye, named, 4-amino-3-(phenyldiazenyl)benzo[4,5]imidazo[1,2-a]pyrimidin-2(1H)-one, (APIP) has been used as a copper corrosion inhibitor in 3.5 wt.% (by weight) NaCl solution. The present investigation provides a brief mechanistic overview of the electrochemical mechanism of copper in aerated NaCl solution, simulating a static marine environment, with and without addition of APIP inhibitor. Potentiodynamic polarization (PDP) results confirmed that the APIP can suppress copper corrosion effectively at low concentration in 3.5 wt.% NaCl solution with an inhibition efficiency of 92.79% due to adsorption, along with the prediction of electrochemical mechanism. Electrochemical impedance spectroscopy (EIS) measurements showed that the corrosion inhibition of Cu proceeds via both diffusion and kinetic controlled processes. Adsorption of APIP on copper surface is well fit with the Langmuir isotherm model and mode of adsorption is proposed. Antimicrobial activity was also studied and the result obtained showed ‘‘eco-friendly’’ nature of APIP. Field Emission Scanning Electron Microscope (FE-SEM), Energy dispersion X-ray (EDX) and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) observations of the copper surfaces confirmed the existence of adsorption of APIP thus can be potentially used in industries in which seawater is implied are numerous such as cooling water systems, desalination plants, power plants, and oil production units. Results obtained from theoretical calculations including quantum chemical density functional theory (DFT) method and molecular dynamics (MD) simulations confirms the experimental findings and provide further insight into the mode of adsorption on the copper surface.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Density-functional thermochemistry. III. The role of exact exchange
Becke, A. D. (1993) · The Journal of Chemical Physics · doi:10.1063/1.464913 · Cited by 103,767
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
Über die Zuordnung von Wellenfunktionen und Eigenwerten zu den Einzelnen Elektronen Eines Atoms
Koopmans, T. (1934) · Physica · doi:10.1016/s0031-8914(34)90011-2 · Cited by 7,754
Sun, H. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp980939v · Cited by 6,001
Absolute electronegativity and hardness: application to inorganic chemistry
Pearson, R. G. (1988) · Inorganic Chemistry · doi:10.1021/ic00277a030 · Cited by 3,475
Dubinin, M. M. (1960) · Chemical Reviews · doi:10.1021/cr60204a006 · Cited by 2,405
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. II. LIQUIDS.1
Langmuir, I. (1917) · Journal of the American Chemical Society · doi:10.1021/ja02254a006 · Cited by 2,350
The COMPASS force field: parameterization and validation for phosphazenes
Sun, H., Ren, P., & Fried, J. R. (1998) · Computational and Theoretical Polymer Science · doi:10.1016/s1089-3156(98)00042-7 · Cited by 1,549
Gugale, G. S., Pujari‐Palmer, S., Basutkar, P. H., Jadhav, S., Shinde, V., & Ubale, V. P. (2019) · Cited by 1,281
The dynamical character of adsorption
de Boer, J. H. (1968) · Cited by 1,034
The Dynamical Character of Adsorption
DEBOER, J. H. (1953) · Soil Science · doi:10.1097/00010694-195308000-00014 · Cited by 813
Electrochemical corrosion of unalloyed copper in chloride media––a critical review
Kear, G., Barker, B. D., & Walsh, F. C. (2004) · Corrosion Science · doi:10.1016/s0010-938x(02)00257-3 · Cited by 805
Review of corrosive environments for copper and its corrosion inhibitors
Fateh, A., Aliofkhazraei, M., & Rezvanian, A. R. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2017.05.021 · Cited by 570
Computer simulations of poly(ethylene oxide): force field, pvt diagram and cyclization behaviour
Rigby, D., Sun, H., & Eichinger, B. E. (1997) · Polymer International · doi:10.1002/(sici)1097-0126(199711)44:3<311::aid-pi880>3.0.co;2-h · Cited by 502
Surface Electrochemistry: A Molecular Level Approach
Bockris, J. O., & Khan, S. U. M. (1993) · CERN Document Server (European Organization for Nuclear Research) · Cited by 492
Solvent effect on vertical electronic transitions by the polarizable continuum model
Cossi, M., & Barone, V. (2000) · The Journal of Chemical Physics · doi:10.1063/1.480808 · Cited by 444
Guo, L., Kaya, S., Obot, I. B., Zheng, X., & Qiang, Y. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.082 · Cited by 399
On the HSAB based estimate of charge transfer between adsorbates and metal surfaces
Kokalj, A. (2012) · Chemical Physics · doi:10.1016/j.chemphys.2011.10.021 · Cited by 384
Strehblow, H.-H., & Titze, B. (1980) · Electrochimica Acta · doi:10.1016/0013-4686(80)90036-5 · Cited by 337
Kokalj, A. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.09.065 · Cited by 316
Mourya, P., Singh, P., Tewari, A. K., Rastogi, R. B., & Singh, M. M. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.02.034 · Cited by 245
Lesar, A., & Milošev, I. (2009) · Chemical Physics Letters · doi:10.1016/j.cplett.2009.10.082 · Cited by 225
Khaled, K. F., & Amin, M. A. (2009) · Corrosion Science · doi:10.1016/j.corsci.2009.05.023 · Cited by 207
Kumar, S. H., & Karthikeyan, S. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400815w · Cited by 128
Imanishi, N., Kanamura, K., & Takehara, Z. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221182 · Cited by 89
Ramírez-Estrada, A., Mena-Cervantes, V. Y., Elizalde, I., Manzo‐Robledo, A., Zamudio-Rivera, L. S., Nieto-Álvarez, D. A., Farelas, F., & Hernández‐Altamirano, R. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02434 · Cited by 34
Pyrazines as Potential Corrosion Inhibitors for Industrial Metals and Alloys: A Review
Obot, I. B., Onyeachu, I. B., & Umoren, S. A. (2018) · Journal of Bio- and Tribo-Corrosion · doi:10.1007/s40735-018-0135-2 · Cited by 26
Metadata
- Authors
- Pareek, S., Jain, D., Hussain, S., Biswas, A., Shrivastava, R., Parida, S. K., Kisan, H. K., Lgaz, H., Chung, I.-M., & Behera, D.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 358
- Pages
- 725-742
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2887617191
- Cited by
- 375
- References
- 27
- FWCI
- 11.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.