The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Waste-cellulose-derived porous carbon adsorbents for methyl orange removal
Abstract
Abstract High-performance nitrogen-doped porous carbon adsorbents were prepared from waste cellulose fibers using the spray-drying method and used to remove methyl orange (MO) from water. The carbon adsorbents possessed a honeycomb-like turbostratic microstructure with hierarchical pores. Such waste-cellulose-derived carbon adsorbents were found to exhibit a fast adsorption rate towards MO. A sample thermally treated at 800 °C with the highest specific surface area (about 1259.4 m2/g) and total pore volume (about 2.7 cm3/g) exhibited the best MO adsorption capacity (337.8 mg/g), which is significantly higher than that of ZnCl2-activated carbon. The effect of MO initial concentration, pH and temperature on the carbon adsorption was investigated systematically. It was found that the adsorption system is heterogeneous while the isotherm data on the carbon sample can be well described by both Langmuir and Freundlich isotherm models. The high-performance and cost-effective carbon adsorbent described in this paper holds a great promise for dye removal from aqueous solutions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230
Hydrothermal conversion of biomass waste to activated carbon with high porosity: A review
Jain, A., Balasubramanian, R., & Srinivasan, M. P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.014 · Cited by 1,199
Biodegradation of Synthetic Dyes—A Review
Ali, H. (2010) · Water, Air, & Soil Pollution · doi:10.1007/s11270-010-0382-4 · Cited by 817
Foo, K. Y., & Hameed, B. H. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.079 · Cited by 179
Cited by
Carbon-based material derived from biomass waste for wastewater treatment
Soffian, M. S., Abdul Halim, F. Z., Aziz, F., A.Rahman, M., Mohamed Amin, M. A., & Awang Chee, D. N. (2022) · Environmental Advances · doi:10.1016/j.envadv.2022.100259 · Cited by 309
Adsorption of methyl orange: A review on adsorbent performance
Iwuozor, K. O., Ighalo, J. O., Emenike, E. C., Ogunfowora, L. A., & Igwegbe, C. A. (2021) · Current Research in Green and Sustainable Chemistry · doi:10.1016/j.crgsc.2021.100179 · Cited by 301
Akhtar, M., Sarfraz, M., Ahmad, M., Raza, N., & Zhang, L. (2025) · Desalination and Water Treatment · doi:10.1016/j.dwt.2024.100914 · Cited by 94
Kamran, U., Rhee, K. Y., Lee, S.-Y., & Park, S.-J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133367 · Cited by 67
Metadata
- Authors
- Sun, B., Yuan, Y., Li, H., Li, X., Zhang, C., Guo, F., Liu, X., Wang, K., & Zhao, X. S.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 371
- Pages
- 55-63
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2931164872
- Cited by
- 244
- References
- 5
- FWCI
- 12.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Waste-cellulose-derived porous carbon adsorbents for methyl orange removal. https://app.cochat.ai/papers/10.1016/j.cej.2019.04.031
- The paper
- Sun, B., Yuan, Y., Li, H., Li, X., Zhang, C., Guo, F., Liu, X., Wang, K., & Zhao, X. S. (2019). Waste-cellulose-derived porous carbon adsorbents for methyl orange removal. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2019.04.031
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.