CoChat

Electrochemical oxidation of perfluorooctane sulfonate (PFOS) substitute by modified boron doped diamond (BDD) anodes

Zhuo, Qiongfang, Wang, Jinbao, Niu, Junfeng, Yang, Bo, Yang, Yang · 2020 · Chemical Engineering Journal
Cited by 147

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

Abstract BDD/SnO2-F electrode was synthesized by spin-coating and heat treatment, and it was characterized by scanning electron microscope-energy dispersive spectrometer (SEM-EDS), X-ray diffraction (XRD), and linear sweep voltammetry (LSV). Electrochemical oxidation of chlorinated polyfluorinated ether sulfonate (F-53B, ClCF2CF2CF2CF2CF2CF2-O-CF2CF2-SO3K) as PFOS substitute was carried out with the BDD, BDD/SnO2, BDD/PbO2, and BDD/SnO2-F anodes. The effects of F and Sn ratio, current density, initial pH, initial F-53B concentration, the supporting electrolyte, NaCl concentration, and electrode distance on the degradation ratios were investigated. The defluorination and the desulfurization were evaluated by ion chromatography and UV–vis spectra. The intermediate products were analyzed on the liquid chromatography system coupled with a triple-stage quadrupole mass spectrometer (LC-MS/MS). The experimental results showed that BDD/SnO2-F had the most outstanding electrochemical oxidation performance. After introduction of F into SnO2 crystal, the grain size of SnO2-F was reduced, the oxygen evolution potential was increased by 0.13 V, and the degradation ratio of F-53B was increased by 15.07%. Under the optimum operating parameters, F-53B removal ratio of 95.6% was obtained, and the defluorination ratio reached 61.39% with NaCl supporting electrolyte concentration of 1 mol/L at current density of 30 mA/cm2 after electrolysis of 30 min. Finally, the electrochemical degradation pathways and the mechanisms of F-53B were proposed based on the intermediate products and the previous literature reported. This study indicates that the electrochemical performance of BDD anode can be much improved by modification with SnO2-F, and BDD/SnO2-F anode is kind of effective anode to decompose refractory compounds.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cej.2019.122280

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 147

Metadata

Authors
Zhuo, Q., Wang, J., Niu, J., Yang, B., & Yang, Y.
Venue
Chemical Engineering Journal
Publisher
Elsevier BV
Published
2020-01
Volume
379
Pages
122280
ISSN
1385-8947 (ISSN-L)
OpenAlex
W2958848376
Cited by
147
References
7
FWCI
4.93
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.