The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Continuous synthesis of 5-hydroxymethylfurfural from glucose using a combination of AlCl3 and HCl as catalyst in a biphasic slug flow capillary microreactor
Open accessAbstract
5-Hydroxymethylfurfural (HMF) was synthesized from glucose in a slug flow capillary microreactor, using a combination of AlCl3 and HCl as the homogeneous catalyst in the aqueous phase and methyl isobutyl ketone as the organic phase for in-situ HMF extraction. After optimization, an HMF yield of 53% was obtained at a pH of 1.5, 160 °C and a residence time of 16 min, and it could be further increased to 66.2% by adding 20 wt% NaCl in the aqueous phase. Slug flow operation in the microreactor greatly promoted mixing/reaction in the aqueous droplet and facilitated HMF extraction to the organic slug, enabling the reaction to run (largely) under kinetic control and an enhanced HMF yield by suppressing its further rehydration, degradation and/or polymerization. Confining reaction in the aqueous droplet prevented humin deposition on the microreactor wall. In line with the literature, [Al(OH)2]+ was confirmed by ESI-MS as the catalytically active species, and is responsible for the glucose isomerization to fructose under various pH values. The ratio between AlCl3 and HCl was optimized for the highest HMF yield and the best results were obtained with 40 mM AlCl3 and 40 mM HCl. Compared with batch results, a higher HMF yield was obtained in the microreactor at the same reaction time mainly due to a higher heating rate therein. The aqueous catalyst was recycled and reused three times without a noticeable performance loss. Thus, the present recyclable and stable homogenous catalyst system, combined with biphasic microreactor operation, is an attractive concept for the glucose conversion to HMF.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources
van Putten, R.-J., van der Waal, J. C., de Jong, E., Rasrendra, C. B., Heeres, H. J., & de Vries, J. G. (2013) · Chemical Reviews · doi:10.1021/cr300182k · Cited by 2,886
Self-citationMetal Chlorides in Ionic Liquid Solvents Convert Sugars to 5-Hydroxymethylfurfural
Zhao, H., Holladay, J. E., Brown, H., & Zhang, Z. C. (2007) · Science · doi:10.1126/science.1141199 · Cited by 1,997
Cited by
Continuous Flow Upgrading of Selected C2–C6Platform Chemicals Derived from Biomass
Gérardy, R., Debecker, D. P., Estager, J., Luis, P., & Monbaliu, J.-C. M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00846 · Cited by 398
Slak, J., Pomeroy, B., Kostyniuk, A., Grilc, M., & Likozar, B. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132325 · Cited by 273
Metadata
- Authors
- Guo, W., Heeres, H. J., & Yue, J.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 381
- Pages
- 122754
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2972298867
- Cited by
- 198
- References
- 2
- FWCI
- 7.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Continuous synthesis of 5-hydroxymethylfurfural from glucose using a combination of AlCl3 and HCl as catalyst in a biphasic slug flow capillary microreactor. https://app.cochat.ai/papers/10.1016/j.cej.2019.122754
- The paper
- Guo, W., Heeres, H. J., & Yue, J. (2020). Continuous synthesis of 5-hydroxymethylfurfural from glucose using a combination of AlCl3 and HCl as catalyst in a biphasic slug flow capillary microreactor. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2019.122754
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.