The DOI matches its Crossref record.
Simultaneous recovery of ammonium, potassium and magnesium from produced water by struvite precipitation
Abstract
Abstract Unconventional oil and gas industries generate huge amounts of produced water (PW) containing high concentrations of potentially hazardous organic and inorganic contaminants. This study demonstrated the feasibility of simultaneously recovering NH4+, K+ and Mg2+ from PW by struvite precipitation after calcium pretreatment with Na2CO3 addition or CO2 stripping. Without pretreatment, calcium exhibited strong competition for phosphate through the formation of Ca3(PO4)2 precipitate. The pretreatment with a Ca2+:CO32− molar ratio of 1:1.2 achieved a relatively low loss rate of Mg2+ (31.3%) and high Ca2+ removal efficiency (95.9%). The results also revealed that the Mg/N/P molar ratio and solution pH had a remarkable effect on the struvite precipitation, while the seeding dosage and Na+ slightly influenced struvite formation. The combination of pH = 9.5 & Mg/N/P molar ratio = 1.5:1:1.5 was ideal for struvite recovery from PW, resulting in NH4+, K+ and Mg2+ recovery efficiencies of 85.9%, 24.8% and 96.8%, respectively. The results of X-ray diffraction and scanning electron microscopy further confirmed that the precipitates generated at this optimal condition were orthorhombic struvite. Moreover, along with the struvite recovery, no accumulation of heavy metals and organic contaminants was observed, indicating that the struvite quality was sufficient for field application. Furthermore, struvite recovery process was able to reduce the Microtox toxicity of PW towards Vibrio fischeri by 60%. Considering the low cost and relatively simple technology, struvite precipitation process has the potential to be used for large-scale applications for produced water treatment and resource recovery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Al-Gethami, W., Qamar, M. A., Shariq, M., Alaghaz, A.-N. M. A., Farhan, A., Areshi, A. A., & Alnasir, M. H. (2024) · RSC Advances · doi:10.1039/d3ra06501d · Cited by 273
Abidli, A., Huang, Y., Ben Rejeb, Z., Zaoui, A., & Park, C. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133102 · Cited by 194
Metadata
- Authors
- Hu, L., Yu, J., Luo, H., Wang, H., Xu, P., & Zhang, Y.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 382
- Pages
- 123001
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2978858162
- Cited by
- 159
- References
- 0
- FWCI
- 11.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Simultaneous recovery of ammonium, potassium and magnesium from produced water by struvite precipitation. https://app.cochat.ai/papers/10.1016/j.cej.2019.123001
- The paper
- Hu, L., Yu, J., Luo, H., Wang, H., Xu, P., & Zhang, Y. (2020). Simultaneous recovery of ammonium, potassium and magnesium from produced water by struvite precipitation. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2019.123001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.