Adsorption performance of standard biochar materials against volatile organic compounds in air: A case study using benzene and methyl ethyl ketone
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Abstract Recently, biochars have been proposed as highly efficient and low-cost media for the adsorptive removal of various hazardous compounds. However, there is a dearth of literature focusing on adsorption performance of biochars against gaseous volatile organic compounds (VOCs). In light of this limitation, the adsorption performances of 12 standard biochars made of six different raw materials (i.e., Miscanthus straw pellets, oil seed rape straw pellets, rice husk, sewage sludge, soft wood pellets, and wheat straw pellets) at two pyrolysis temperature conditions (i.e., 550 °C and 700 °C) were investigated against two model gaseous VOCs (i.e., benzene and methyl ethyl ketone (MEK)) at 1 Pa each. The breakthrough volume (BTV) and partition coefficient (PC) of benzene at 10% BTV, when measured for all these biochars, varied from 1.4 to 10 L atm g−1 and 6.E-04 to 1.4E-02 mol kg−1 Pa−1, respectively. Similarly, their counterpart values for MEK were 1.8 to 40 L atm g−1 and 1.E-03 to 2.E-03 mol kg−1 Pa−1, respectively. The largest adsorption capacity values for benzene (2.9 mg g−1) and MEK (43 mg g−1) were observed from the soft wood pellet biochar prepared at 700 °C (SWP700) and rice husk biochar prepared at 550 °C (RH550), respectively. The results indicate that most biochars adsorbed MEK preferentially over benzene. The adsorption of MEK appeared to be primarily influenced by surface features and composition of each specific biochar, while that of benzene was proportionate to their surface area. Overall, the results of this investigation are expected to help establish technical standards for effective removal of gaseous VOCs by biochars.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Self-citationChen, B., Zhou, D., & Zhu, L. (2008) · Environmental Science & Technology · doi:10.1021/es8002684 · Cited by 1,823
Adsorption of VOCs onto engineered carbon materials: A review
Zhang, X., Gao, B., Creamer, A. E., Cao, C., & Li, Y. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.05.013 · Cited by 1,479
Metal-organic frameworks with high capacity and selectivity for harmful gases
Britt, D., Tranchemontagne, D., & Yaghi, O. M. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0804900105 · Cited by 958
Dai, Y., Zhang, N., Xing, C., Cui, Q., & Sun, Q. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.01.161 · Cited by 935
Comparison of biochar properties from biomass residues produced by slow pyrolysis at 500°C
Lee, Y., Park, J., Ryu, C., Gang, K. S., Yang, W., Park, Y.-K., Jung, J., & Hyun, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.135 · Cited by 624
Shaheen, S. M., Niazi, N. K., Hassan, N. E. E., Bibi, I., Wang, H., Tsang, D. C. W., Ok, Y. S., Bolan, N., & Rinklebe, J. (2019) · International Materials Reviews · doi:10.1080/09506608.2018.1473096 · Cited by 527
Self-citationSimultaneous Removal of Multicomponent VOCs in Biofilters
Yang, C., Qian, H., Li, X., Cheng, Y., He, H., Zeng, G., & Xi, J. (2018) · Trends in Biotechnology · doi:10.1016/j.tibtech.2018.02.004 · Cited by 258
Cited by
Multifunctional applications of biochar beyond carbon storage
Bolan, N., Hoang, S. A., Beiyuan, J., Gupta, S., Hou, D., Karakoti, A., Joseph, S., Jung, S., Kim, K.-H., Kirkham, M. B., et al. (2022) · International Materials Reviews · doi:10.1080/09506608.2021.1922047 · Cited by 638
Self-citationThe potential of biochar as a microbial carrier for agricultural and environmental applications
Bolan, S., Hou, D., Wang, L., Hale, L., Egamberdieva, D., Tammeorg, P., Li, R., Wang, B., Xu, J., Wang, T., et al. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.163968 · Cited by 515
Feng, D., Guo, D., Zhang, Y., Sun, S., Zhao, Y., Shang, Q., Sun, H., Wu, J., & Tan, H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127707 · Cited by 334
Khan, R., Shukla, S., Kumar, M., Zuorro, A., & Pandey, A. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.144495 · Cited by 114
Zhang, X., Cao, L., Xiang, W., Xu, Y., & Gao, B. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121295 · Cited by 110
Metadata
- Authors
- Vikrant, K., Kim, K.-H., Peng, W., Ge, S., & Sik Ok, Y.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 387
- Pages
- 123943
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2998049430
- Cited by
- 107
- References
- 9
- FWCI
- 3.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.