The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Facile synthesis of CuBTC and its graphene oxide composites as efficient adsorbents for CO2 capture
Open accessAbstract
Abstract Easily regenerable adsorbents are highly desirable for CO2 capture. In this regard, a modified synthesis method for preparing CuBTC and its graphene oxide (CuBTC@GO) composites as adsorbents is developed using a mixed solvent strategy at 323 K for the first time. The addition of N, N-Dimethylformamide was vital for the crystallization of CuBTC at low temperature by accelerating the nucleation. The newly synthesized CuBTC showed much higher surface area and total pore volume, compared with CuBTC synthesized by conventional method. As a result, the as-synthesized CuBTC showed a CO2 adsorption capacity of 8.02 mmol/g at 273 K, 1 bar, which was 17–90% higher than the reported CO2 capacity of CuBTC prepared by conventional method. The fabrication of CuBTC@GO composites enhanced the CO2 adsorption capacity mainly through the improved porosity and dispersion force. Compared with CuBTC, an improved CO2/N2 selectivity for CuBTC@1%GO was obtained from the binary breakthrough experiments, which is beneficial to practical gas separations. The partition coefficient of CuBTC and CuBTC@GO composite were evaluated at different breakthrough levels, e.g., 5%, 10% and 100%, with an inlet CO2 partial pressure of 0.15 bar. CuBTC@1%GO displayed higher partition coefficient values than CuBTC at all three breakthrough levels. The cyclic adsorption experiments for regenerability evaluation showed that the CO2 adsorption reversibility for CuBTC@1%GO composite could maintain above 90%, while that of CuBTC dropped to less than 74% after five adsorption-desorption cycles. The CuBTC@GO composite would be a promising CO2 capture adsorbent with both high CO2 adsorption capacity and remarkable regeneration performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Cited by
Li, Y., Bu, J., Sun, Y., Huang, Z., Zhu, X., Li, S., Chen, P., Tang, Y., He, G., & Zhong, S. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.129945 · Cited by 527
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Metadata
- Authors
- Shang, S., Tao, Z., Yang, C., Hanif, A., Li, L., Tsang, D. C. W., Gu, Q., & Shang, J.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 393
- Pages
- 124666
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3011384924
- Cited by
- 169
- References
- 2
- FWCI
- 10.04
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.