The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Experimental study on pyrolysis/gasification of biomass and plastics for H2 production under new dual-support catalyst
Abstract
Abstract Energy security and environmental pollution are two major concerns worldwide. H2 from pyrolysis/gasification of biomass and waste plastics is a clean energy source. However, relatively low yield and composition of H2 is produced using this technology, thus preventing its commercialisation. Catalyst is key to promote H2 production. This paper aims to explore whether newly developed dual-support catalyst Ni-CaO-C can catalyse gasification of volatiles from pyrolysis of different plastics (e.g. high density polyethylene - HDPE, polypropylene – PP and polystyrene - PS) and biomass (e.g. pine sawdust) for H2 production. Experiments with and without catalysts were performed to test the performance of catalyst Ni-CaO-C. Impact of changing operating conditions (i.e. feedstock ratio, reforming temperature and water injection flowrate) on H2 production were also investigated. Results show that catalysts (Ni-Al2O3 or Ni-CaO-C) can effectively promote H2 production. The H2 production using catalyst Ni-CaO-C is much better than catalyst Ni-Al2O3. The catalytic effect of Ni-CaO-C rank in the sequence of HDPE > PP > PS. Plastic content in feedstock is suggested to be less than 40 wt% (for HDPE and PP) and 30 wt% (for PS) when mixing with biomass to reach high H2 production. When the feedstock ratio is constant, high H2 yield (i.e. 80.36 mmol/g) is achieved under relatively low reforming temperature at 700 °C and water injection flowrate at 5 mL/h for HDPE. However, under the same conditions, PP and PS only have H2 yields at 59.35 mmol/g and 38.51 mmol/g. PS requires even higher temperature (800 °C) and water injection flowrate (10 mL/h) to ensure acceptable H2 yields. The new findings presented in this paper can help large scale commercial application of pyrolysis/gasification technologies for biomass and waste plastics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastics in the Marine Environment
Law, K. L. (2017) · Annual Review of Marine Science · doi:10.1146/annurev-marine-010816-060409 · Cited by 1,059
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Chai, Y., Gao, N., Wang, M., & Wu, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122947 · Cited by 265
Self-citation
Cited by
Hameed, Z., Aslam, M., Khan, Z., Maqsood, K., Atabani, A. E., Ghauri, M., Khurram, M. S., Rehan, M., & Nizami, A.-S. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110375 · Cited by 270
Metadata
- Authors
- Chai, Y., Wang, M., Gao, N., Duan, Y., & Li, J.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 396
- Pages
- 125260
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3023450197
- Cited by
- 158
- References
- 3
- FWCI
- 6.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Experimental study on pyrolysis/gasification of biomass and plastics for H2 production under new dual-support catalyst. https://app.cochat.ai/papers/10.1016/j.cej.2020.125260
- The paper
- Chai, Y., Wang, M., Gao, N., Duan, Y., & Li, J. (2020). Experimental study on pyrolysis/gasification of biomass and plastics for H2 production under new dual-support catalyst. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2020.125260
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.